I'm going to attempt to try and replace the 12-volt in mine I also own a nv200 and I'm quite fond of it. Thank you for showing me how to open the panels I probably would have ended up breaking something
This video is useful so i feel obliged to chime in. I swapped out the Clarion PN-3089L which is the stock system in the base 2015 NV200. I used both these wiring harnesses that I purchased from Amazon. I had to quadruple check that wiring scheme because it doesn't look like it matches the wiring harness at all. BUT if you look at the video around 3:25 you can see the stock harness. look at those wires and if it looks close to yours, it will work. I am now running a Sony DSXB700 without any issues. thx for the video
Carol. My dash lights for the a/c do not work in 2015 NV200 at night. Should I change fuse or bulbs in dash?? What fuse or what bulbs?? Please advise??
I attempted to run a small appliance from a 150 watt inverter plugged into the 12-volt. The appliance was only 96 watts and didn't consume too much for the inverter to handle. I don't know what wrong the inverter burnt-out I'm assuming because it was pretty old. However, I don't understand why the 12-volt port is no longer operational. I checked all the fuses. Examine the port. Haven't had a chance to take a look at the interior to see if the wires were burned. since the fuses are fine and the port doesn't seem to be damaged, do you have any diagnosis?
do you know where to locate m56 to disconnect the bluetooth antenna? i was told its the black wire next to m58 and m58. is it behind the glovebox? thanks
hey no clue if you check these comments now after 6 years, i saw the comment about you not owning this anymore but i thought i would ask. you didnt end up having to connect ANY wires the the "Canbus/Additional/Second" wiring harness just the main 20 pin? im worried about not having two harnesses...
Hi I like to know if you can help me I want to put on my van nv200 2019 a OEM navigator system from Nissan I need to buy any accessories or its only plug My van don't come with navigator system Thanks
I think it's just plug it in, however there is a bluetooth module that is on the passenger side on the bottom; i dont' know if you will need that, too.
Great video. I am planing to install a head unit with CarPlay on my 2013 Nissan nv200 but have some questions and or doubts. What head unit would you recommend and also not too clear about the steering functions. Do I need a specific harness? Please advise. Thanks
Any standard head unit will do. I had an android joying from Amazon. It worked great. The steering wheel controls are simply two wires. Sadly I totalled this car in this video... So no more videos for this car.
I have a bluetooth unit and the mic has too many wires for analog, so I think it's some sort of digital signal but couldnt' figure it out. :( It seems to be a common problem with factory mics.
i got them from two places. Chilton (the colors are wrong) and qualityservicemanuals.com (colors are correct for the most part, but i think some pinouts are missing.)
I'm going to attempt to try and replace the 12-volt in mine I also own a nv200 and I'm quite fond of it. Thank you for showing me how to open the panels I probably would have ended up breaking something
This video is useful so i feel obliged to chime in. I swapped out the Clarion PN-3089L which is the stock system in the base 2015 NV200. I used both these wiring harnesses that I purchased from Amazon. I had to quadruple check that wiring scheme because it doesn't look like it matches the wiring harness at all. BUT if you look at the video around 3:25 you can see the stock harness. look at those wires and if it looks close to yours, it will work. I am now running a Sony DSXB700 without any issues. thx for the video
Glad it worked for you!
Carol. My dash lights for the a/c do not work in 2015 NV200 at night. Should I change fuse or bulbs in dash?? What fuse or what bulbs?? Please advise??
I attempted to run a small appliance from a 150 watt inverter plugged into the 12-volt. The appliance was only 96 watts and didn't consume too much for the inverter to handle. I don't know what wrong the inverter burnt-out I'm assuming because it was pretty old. However, I don't understand why the 12-volt port is no longer operational. I checked all the fuses. Examine the port. Haven't had a chance to take a look at the interior to see if the wires were burned. since the fuses are fine and the port doesn't seem to be damaged, do you have any diagnosis?
Have you got a video for taking glove box out. I want to run a wire through from engine
Is that bracket mounted on the oem radio or did you purchase it separate
do you know where to locate m56 to disconnect the bluetooth antenna? i was told its the black wire next to m58 and m58. is it behind the glovebox? thanks
no sorry I wrecked the car so I can't check anymore. But my third party head unit has its own bluetooth antenna. I think.
hey no clue if you check these comments now after 6 years, i saw the comment about you not owning this anymore but i thought i would ask.
you didnt end up having to connect ANY wires the the "Canbus/Additional/Second" wiring harness just the main 20 pin?
im worried about not having two harnesses...
no canbus wires
@@carolchennning9188 awesome it looks like I've got my weekend project set for me then ;)
Did the steering wheel controls work with this installation?
i think it did iirc
I have hooked up back up camera but it stays on continuously... is there a reason for this?
You need to use a wire to turn it on and off. Usually people use backup light wire r that.
Hi I like to know if you can help me
I want to put on my van nv200 2019 a OEM navigator system from Nissan I need to buy any accessories or its only plug
My van don't come with navigator system
Thanks
I think it's just plug it in, however there is a bluetooth module that is on the passenger side on the bottom; i dont' know if you will need that, too.
Great video. I am planing to install a head unit with CarPlay on my 2013 Nissan nv200 but have some questions and or doubts. What head unit would you recommend and also not too clear about the steering functions. Do I need a specific harness? Please advise. Thanks
Any standard head unit will do. I had an android joying from Amazon. It worked great. The steering wheel controls are simply two wires. Sadly I totalled this car in this video... So no more videos for this car.
carolcheny thanks for the information and hope you are ok.
Hi carol do your steering wheel control bottom work.
By resistance. Just two plain wires.
@@carolchennning9188 pls can you help because i cant find the 2 wires
@@VARYPATIS is in video
What wire do I connect my aftermarket head unit ground cable to?
find a metal screw or something. or, you should be able to find a ground black wire somewhere.
That was a bear - I did find a screw, but it was a pain. It's important though.
hi carol. thanks for the great video. i have some questions regarding installing an sub and amp and also rear speakers. any tips?
I have no rear speaker, but i did install the sub and amp. I'm not a pro installer so I just have them on the floor.
Thanks for the quick reply! So I have the nav deck, any ideas how to bypass and use with a sub or new speakers? Your deck is aftermarket huh?
what model joying radio? do you have link for it? any harness kits needed? thank you.
Joying radio comes with a bracket but I didn't use it at all. Joying 7" head unit. NV200 is standard double DIN, nothing is needed to install.
thx...luv my nv200 & joying headunit.
Hi Carol, what about the microphone? how do you wire that?
I have a bluetooth unit and the mic has too many wires for analog, so I think it's some sort of digital signal but couldnt' figure it out. :( It seems to be a common problem with factory mics.
is this on a 2016 or 2017. will wire harness be the same
2016. there's no reason for Nissan to change harness. 2017 merely added standard hill assist and power locks.
carolcheny
did you need to use steering wheel control adaptor for your buttons to work on the radio
Victor Morales like I stated, no adapter. Directly wire it
Where did you find the wiring diagrams?
i got them from two places. Chilton (the colors are wrong) and qualityservicemanuals.com (colors are correct for the most part, but i think some pinouts are missing.)
Open a audio shop