When I accidentally pulled off my oven door last night while trying to move it, this was the only video that gave me what I needed to put it back on. I was tearing my hair out. Thank you.
My oven door been off for a few months now and I've watched a few YT videos that were of no help because one hinge is spring loaded and the other isn't. Decided to try again today so I searched on YT, stumbled on your video and after ten minutes the oven door is back on..I can't even express how happy and accomplished I feel right now!! Thanks.
Thank you so much! You might have just saved my marriage. My husband had gotten to the "why in the hell did you take the damn thing off, anyway?!" level of frustration. Since I had just cleaned the oven, I was in no mood for attitude. 🤣 So very much appreciate this video!
Genius! Especially with the tip to pry open and "hold" open at 45 degrees with a small object long enough to insert the door in to the frame and then extend to 180 degrees, while installing. Spent hours trying to find explainer videos but THIS is the only one that showed all. It even works on overseas models which have removable glass and slide-in hinges.
Just the info I needed! Only one hinge came off and I couldn’t get it back in. After watching your video, I used my Channel locks to pull the hinge out to where it needed to be and I was able to get it back in place. You explained thing well and camera angle was great. Thank you!!! Feelin’ accomplished! 💪🏼
Thank you! I had fought this for quite some time till I figured out the hinges had to be in the "open" position in order to be inserted correctly. Never would have thought of useing the driver bits to hold them open. Great video tip. Clear and to the point.!
Thanks, thanks, thanks. The Whirlpool installation guide showed the door hinges straight out, and they won't go in that way. I'd never have gotten the danged thing back on w/o your video.
After a dozen futile attempts, I gave up and sat down to watch Sunday football. Then I decided to check RUclips and was comforted that so many had same problem and that you provided a quick fix. Also used spark plug socket. In just a few minutes, the door was back on saving an expensive and embarrassing service call!
I was praying for an answer to this and hours of trying to fix this last night--God shared he would help me--I woke up this morning and your video was in the youtube recommended feed...God is so good! And you are good too! Blessings multiplied to you
THANK YOU so much...hours of frustration and pinched fingers to get the oven door on. I was about to call a repair man until by accident I stumbled upon this video. Happy wife and working oven again!
Totally saved my bacon with this video. And likely a 100 dollar service call. My wife took it off to clean it while I was working and couldn't figure out how to get it back on. Thanks man!
Thank you so much. Hubby and I struggled and struggled....then read the manual...which didn't help at all....then we discovered this video. Simple ... 2 minutes (tops) after we fought with the darned door for over an hour. This is after we couldn't get the door off to make it easier for me to clean. No, I won't use the self-cleaning feature. It terrifies me. Thank you! Thank you!
Your fix worked over the others I watched. I didn't need to stick anything in as the guard took that spot. But I did use the socket wrench but which gave me better torque. I even got the door on faster than I thought I would. Thank you for posting this solution..
That was really a great idea. really it was. i have been trying to figure out what to do. door hinge kept popping closed. thank you much for you greatness in thought!
With the second hinge you can easily see the hinge holder that you slide up to lock it when you have the hinge pulled out. It is over the hinge you open and then you slide it up into the hole that you pulled the hinge out of to hold the hinge out as you put it into the oven hole. Then you open the door fully and put the hinge holder back down.
I came here to say the same thing. The hinge lock is inside there. You can see it on the second hinge. The same thing happened to me when I took the door off it went too far back inside and I had to haul the hinge down and haul the lock back out.
Thanks for sharing the proper way to get the hinges in position. My wife and kids tried for 3 hours trying someone else's method while I was asleep. Once I saw your video, it jarred my memory about the last time I removed and reinstalled an oven door (and used the same method as you). It took about 5 minutes to reinstall the door using this method. Thanks for that!
Thank you for this video. I got the Whirlpool-Gold door reinstalled in 30 seconds, after fighting a displaced hinge with a stuck clip for a couple hours.
Thank you for posting this! The clips (locks) on my door would not "lock" open and hinge kept springing back. Today I will try this approach. Thanks again!
Thank you for blessing others with this knowledge. Our hinge is a little different from yours but we used the concept you shared and the Lord blessed for us to finally get the door back on.
Thank you sir!!! I was frustrated for an hour trying to fix my oven door. Watched this video, and it literally took me seconds to fix it, because of that screw head trick 😂SMH...
Thank you for making this video. I was struggling with my Zline oven door until I saw your video. I needed a little more opening so I cut two small aluminum wedges rather than using the screwdriver tips. VOILA. Thanks again!
Thank you so much for your help it was so easy to do it I had three weeks with my door down and I cannot put it up but watching your video made it so easy to put the door back inside 🙏🏼🙏🏼🙏🏼 god bless you
THANK YOU, THANK YOU, THANK YOU!!!! Mother and daughter were almost to blows on this. I (the mother) need a lot of chocolate ice cream after fighting with this oven door. Now, thanks to your video, I can really enjoy my ice cream. Thank you for your very helpful video.
On my oven, one hinge isn't spring loaded and the clip worked, the other hinge WAS spring loaded and the clip wouldn't work to stop it from springing back
There is a metal cover that you are supposed to lift up when the door is on the oven and the way you do it to take the door off locks that into place to stop the hinges closing while you are cleaning it
This was a great video - I have a kitchen aide built in electric oven and spent days trying to figure this out! I used a 1" pipe to bring the hinge down and the screwdriver bits worked out great - thanks for posting this !
There’s actually a tiny hole when u pull the hinge open and there are pins ur suppose to put in the hole to stop it from shutting , if u don’t have the pins a nail or metal skewer will work
When I accidentally pulled off my oven door last night while trying to move it, this was the only video that gave me what I needed to put it back on. I was tearing my hair out. Thank you.
Words can not explain how grateful I am for this video. I have no idea how I found this but it fixed my 2hour problem in 2 minutes. Thank you so much.
My oven door been off for a few months now and I've watched a few YT videos that were of no help because one hinge is spring loaded and the other isn't. Decided to try again today so I searched on YT, stumbled on your video and after ten minutes the oven door is back on..I can't even express how happy and accomplished I feel right now!! Thanks.
This was the single most useful video on the internet, thank you! Thank God for RUclips and people like you who post very detailed ways to fix things.
Thank you so much! You might have just saved my marriage. My husband had gotten to the "why in the hell did you take the damn thing off, anyway?!" level of frustration. Since I had just cleaned the oven, I was in no mood for attitude. 🤣 So very much appreciate this video!
What a lifesaver, wasted two days and your video explained it in two minutes. Wish I had found this earlier. 👍🏼
Genius! Especially with the tip to pry open and "hold" open at 45 degrees with a small object long enough to insert the door in to the frame and then extend to 180 degrees, while installing. Spent hours trying to find explainer videos but THIS is the only one that showed all. It even works on overseas models which have removable glass and slide-in hinges.
Thanks very much Michael. Saved my day. The screws to hold the hinges in place is the key. Bravo
This was very helpful, My brother in law watched your this video and fixed my oven door very quickly. 👍
YOU ARE A LIFESAVER!!! I could not figure out how to open the hinges. I would have NEVER figured it out actually. thank you!!!
Just the info I needed! Only one hinge came off and I couldn’t get it back in. After watching your video, I used my Channel locks to pull the hinge out to where it needed to be and I was able to get it back in place. You explained thing well and camera angle was great. Thank you!!! Feelin’ accomplished! 💪🏼
Thank you! I had fought this for quite some time till I figured out the hinges had to be in the "open" position in order to be inserted correctly. Never would have thought of useing the driver bits to hold them open. Great video tip. Clear and to the point.!
Thanks, thanks, thanks. The Whirlpool installation guide showed the door hinges straight out, and they won't go in that way. I'd never have gotten the danged thing back on w/o your video.
this worked perfectly! a 2 minute fix overcame an hour of frustration - thank you!!
Awesome!!!!!!
I've stuggled with this dang door for two day & countless Advil's for my back..Thanks
After a dozen futile attempts, I gave up and sat down to watch Sunday football. Then I decided to check RUclips and was comforted that so many had same problem and that you provided a quick fix. Also used spark plug socket. In just a few minutes, the door was back on saving an expensive and embarrassing service call!
Never had an issue getting door back on like I am today. Will try this. Thanks!
Absolute legend of a gentleman, same issues as many others. Hinges kept springing back etc saved an oven and a marriage!!!
🤣
Thank you your video was so helpful and with the help of another video I successfully reinstalled my oven door
I was praying for an answer to this and hours of trying to fix this last night--God shared he would help me--I woke up this morning and your video was in the youtube recommended feed...God is so good! And you are good too! Blessings multiplied to you
Reinstalling these doors are a pain and the manufacturer instructions are inaccurate. Thanks to your video, I got my door installed. Thanks.
THANK YOU so much...hours of frustration and pinched fingers to get the oven door on. I was about to call a repair man until by accident I stumbled upon this video. Happy wife and working oven again!
Totally saved my bacon with this video. And likely a 100 dollar service call. My wife took it off to clean it while I was working and couldn't figure out how to get it back on. Thanks man!
Thank you so much. Hubby and I struggled and struggled....then read the manual...which didn't help at all....then we discovered this video. Simple ... 2 minutes (tops) after we fought with the darned door for over an hour. This is after we couldn't get the door off to make it easier for me to clean. No, I won't use the self-cleaning feature. It terrifies me. Thank you! Thank you!
Your fix worked over the others I watched. I didn't need to stick anything in as the guard took that spot. But I did use the socket wrench but which gave me better torque. I even got the door on faster than I thought I would. Thank you for posting this solution..
That was really a great idea. really it was. i have been trying to figure out what to do. door hinge kept popping closed. thank you much for you greatness in thought!
Thank you sooooo much! This just finished an hour of wrestling the oven door! 🥴
With the second hinge you can easily see the hinge holder that you slide up to lock it when you have the hinge pulled out. It is over the hinge you open and then you slide it up into the hole that you pulled the hinge out of to hold the hinge out as you put it into the oven hole. Then you open the door fully and put the hinge holder back down.
I came here to say the same thing. The hinge lock is inside there. You can see it on the second hinge. The same thing happened to me when I took the door off it went too far back inside and I had to haul the hinge down and haul the lock back out.
Yup! I was about to write the same thing.
It worked perfectly for me today!!! Saved me some bucks, thanks for sharing, blessings !!!
Thanks for sharing the proper way to get the hinges in position. My wife and kids tried for 3 hours trying someone else's method while I was asleep. Once I saw your video, it jarred my memory about the last time I removed and reinstalled an oven door (and used the same method as you). It took about 5 minutes to reinstall the door using this method. Thanks for that!
Thank you, i watched this video after i pinched my finger 🙏 and they've finally closed 🙏💗🙏
Can you please tell me if it was hard to pull because I don't want to break it please 🙏🙏🙏🙏
Thank you so much I struggled with this for days until I found your channel I fixed it in 2 minutes ❤
Thank you for taking the time to share and help . I and my wallet thoroughly thank you,,,,
2" screw bits. Who woulda thought? Tool Time Taylor would be jealous. Thanks Michael. Saved my bacon, and $200 weekend repair call.
Thank you for this video. I got the Whirlpool-Gold door reinstalled in 30 seconds, after fighting a displaced hinge with a stuck clip for a couple hours.
Thank you for posting this! The clips (locks) on my door would not "lock" open and hinge kept springing back. Today I will try this approach. Thanks again!
Thank you for blessing others with this knowledge. Our hinge is a little different from yours but we used the concept you shared and the Lord blessed for us to finally get the door back on.
Thank you Michael. We were totally stumped until we found your video.
You saved my hind pots big time my friend ! My Sisters wanted a new $1000.00 replacement oven just because of the broken inner glass !!!
Thanks so much! Knew what the problem was but didn’t know how to keep the hinges open. Saved me a lot of aggravation!
Seriously. 45 mins of wiggling. 2 mins later, bam!!! Thanks so much!!
You are awesome. It worked perfectly. Saved me from buying a new oven. This is why I 💕 love RUclips. Thanks man
Thank you sir!!! I was frustrated for an hour trying to fix my oven door. Watched this video, and it literally took me seconds to fix it, because of that screw head trick 😂SMH...
Thanks to this video I was able to complete a project that almost broke my will to finish it at all.
Thank you for this. The instruction manual says nothing about this.
Thank you for this info my husband worked so hard to put that freakin' door back on
Thank you SOOOOO much! We had struggled and struggled and yours was the only information that not only helped, but got our oven door replace. Mahalo!
Thank you so much ! Was about to call a repair business!
Worked perfectly. What a colossal design flaw!
Thanks this worked perfect installed back in 1min with this technique
Thank you for making this video. I was struggling with my Zline oven door until I saw your video. I needed a little more opening so I cut two small aluminum wedges rather than using the screwdriver tips. VOILA. Thanks again!
Thank you for posting, saved a lot of frustration!
GOOD AND CLEAR. Trying it now!!! Also like the way you talk. :)
Thank you I was going crazy I almost bought another one!!! You Shaved me a lot of money and stress, again thank you......
Sir thanks for your video i just did mine a whirlpool worked great 😊
Thank you so much for your help it was so easy to do it I had three weeks with my door down and I cannot put it up but watching your video made it so easy to put the door back inside 🙏🏼🙏🏼🙏🏼 god bless you
Thank you so much for this video! We've been trying to get the door back in for days. It took five minutes with this work around.
Thank you, you saved me sir. I was about ready to cry and break my lease if they’d said anything to me, about breaking the oven door.
THANK YOU, THANK YOU, THANK YOU!!!! Mother and daughter were almost to blows on this. I (the mother) need a lot of chocolate ice cream after fighting with this oven door. Now, thanks to your video, I can really enjoy my ice cream. Thank you for your very helpful video.
Thank you - after watching numerous videos and trying several things I found your video and it worked! Fast and easy!
You don’t know how much I appreciate this video thank you so much 😅
Thanks for this video. Exactly what we needed to know trying to put the door back on. Worked perfectly!
I watched lther videos fhat people said saved theor lives and I was still wrestling my door like a wild alligator. This worked in one try. 🥴 Thanks!
Sweet! it worked perfectly! Zero swearing on the install! THANKS!
Great video!!! I would add that for the hinge notch to sit, you have to insert it at the perfect angle or it won't hook, so be mindful of that.
Thanks for your help. Worst oven door design ever!!!
No se quien sea señor pero lo amo… thanks!
Thanks so much! This video really helped. We followed the directions you gave a got it on right on the first try. We had been trying for two days.
Thank you so much. I watched so many videos before I saw this one. You’re my hero dude!
Muchas gracias me salvaste sigue haciendo estos vídeos ayudan mucho
omfg thank you so much been 2 days trying to put it back on I was about to call matience 😂 but it worked! 😊
You are a genius!!! Thank you!!!
Could not get our door back on and this save us from having to call a repair person. Thanks!
Hallelujah, it worked! Thank you!
Thanks man we just had ours fall our life saver
This saved my day! Thank you!
Me salvaste la vida hoy después de 2 horas intentando poner la puta puerta 😅
I dodged a $1000 bullet! Thank you sir! I thought I had broken something but after watching your video I fixed it in 5 minutes.
I DID IT!!!! ALL BY MYSELF!! lol. YOU ROCK.
THANK YOU FOR THIS VIDEO SIR!!!
Hi Michael, thanks for the video--anyway to fix hinges that have snapped back in place, we cannot move them back
On the hinges are a clip that you pull down to keep you from having to use your method. Its a built in oem clip
Nice video, clips were broken on my oven so this trick worked well!!
On my oven, one hinge isn't spring loaded and the clip worked, the other hinge WAS spring loaded and the clip wouldn't work to stop it from springing back
Thank you so much for helping us
Thank you it really works this was a big help
Thank you so much for this !
There is a metal cover that you are supposed to lift up when the door is on the oven and the way you do it to take the door off locks that into place to stop the hinges closing while you are cleaning it
Had an appliance guy replacing the ignitor and he was having a VERY difficult time getting the door on. Your video solved the problem, thank you!!
You're a true hero
You solved my problem thank you
Thank you such a God send
This was a great video - I have a kitchen aide built in electric oven and spent days trying to figure this out! I used a 1" pipe to bring the hinge down and the screwdriver bits worked out great - thanks for posting this !
Thanks for your time
You're a legend. Couldn't figure it out why it wouldn't lock back into the door. Thank you.
There’s actually a tiny hole when u pull the hinge open and there are pins ur suppose to put in the hole to stop it from shutting , if u don’t have the pins a nail or metal skewer will work
Saved me, thank you
Very good video thank so must
Thank you so much! This just saved me a lot of aggravation! 😊
You are a life saver :) Thank you
My exact issue today! Thank you!!
You saved me from the dog house! Lol Thanks for posting this.