Thanks for posting this! A friend purchased a Ford F750 with a Cummins ISB CM850 engine; won't get out of it's own way on the highway, but seems to accelerate well enough from 0-45, then it seems like it wants to slowly accelerate stopping around 55-60. I'll try looking into the road speed governor tomorrow. Looks like the waste gate on the turbo is bad too; boost pressure is hitting 46 PSI.
Could you tell me why would my truck runs perfect when in test mode on insite. N14 injectors testing? No mechanic can tell why in shop. Thanks for any info.
hello i have a 2022 lt series with x15, been to shop twice now and they put on computer to turn up to 75 mph, but it will only go 73 but it says on laptop set at 75 mph. you can actually set cruise at 75 n shows it but truck will still only go 73, and on any slight decline if it just knicks 74 mph the trans will downshift to 11th n drop speed to 71/72 n then climb up to 73 n stop there n the bucking of droppin to 11th shouldnt be.. two questions, why wont it go 75 n do the droop settings have anything to do with this n what should the low n high droop be set at? thanks!
Any reason why the cruise would not exceed the pedal speed? i know on the detroits there is a setting to allow cruise to exceed vehicle RLS. Do you know if theres a similar setting on the cummins ECU? thanks
Hello nice video, I had also figured out how to do this with my trucks but on one truck that parameter change is locked so I can’t change it myself. It was tuned and I believe the tuner locked it for some dumb reason. You don’t happen to know how to unlock or override it somehow would you? I believe I’ll have to get a new tune for it but asking just Incase. Thanks
Its funny how a driver can ditate how fast he wants to go in your truck. Speed will not get you there faster than traffic allows. The faster you go the more fuel it consumes more stress and wear and tear on your equipment. Any business owner operator knows this, plus safety is now minimized.
Guess you've never driven a governed truck. Just because the top speed has been adjusted doesn't mean you would drive wide open. You don't drive your car wide open even though you can. Correct ?
Good learning
Thanks for posting this! A friend purchased a Ford F750 with a Cummins ISB CM850 engine; won't get out of it's own way on the highway, but seems to accelerate well enough from 0-45, then it seems like it wants to slowly accelerate stopping around 55-60. I'll try looking into the road speed governor tomorrow. Looks like the waste gate on the turbo is bad too; boost pressure is hitting 46 PSI.
thanks guys...it good job..
Thank you !
Will this be able to adjust HP aswell?
I have learned something about this video
Whats that
Thanks pal!
What about for excavators (off-road)No power, low RPM, load time?
p.s. I'm sorry, My English isn't very good.
any software for freightliner trucks and is it free or do we have to pay for the software thanks.
Load up insite and take a coffee break. Might be ready when you get back, maybe.
Right
Wow amazing
Thanks
complimenti! sai dirmi come aggiungere le ore ad una centralina cm 552 Grazie
Could you tell me why would my truck runs perfect when in test mode on insite. N14 injectors testing? No mechanic can tell why in shop. Thanks for any info.
Top speed of my box truck is 68 mph. Is there a way I can change that set it to 75 mph
Can you turn mine up for me. I bought a 2020 T680 w/ cummins. Only goes 70 mph. What state are you in. Dealer wanted $185
How can i view truck or engine hp ratings?
Im installed Inline 6 on my computer, at the end of this process i was asked for basic password. Where i can get it? Thanks a lot
hello i have a 2022 lt series with x15, been to shop twice now and they put on computer to turn up to 75 mph, but it will only go 73 but it says on laptop set at 75 mph. you can actually set cruise at 75 n shows it but truck will still only go 73, and on any slight decline if it just knicks 74 mph the trans will downshift to 11th n drop speed to 71/72 n then climb up to 73 n stop there n the bucking of droppin to 11th shouldnt be.. two questions, why wont it go 75 n do the droop settings have anything to do with this n what should the low n high droop be set at? thanks!
It sounds like ur rev/per mile is off on ur tire size
its 493 revs/mi where it should be.. wondering if it needs to be taken out of economy mode n into performance mode?
How do you set engine over speed parameters? Any help would be great thank you.
You can find it right in the parameters
Any reason why the cruise would not exceed the pedal speed? i know on the detroits there is a setting to allow cruise to exceed vehicle RLS. Do you know if theres a similar setting on the cummins ECU? thanks
*RSL
Yes there is ill try and do a video of how to change that
Hi, the computer you are using is a special computer to program cummins engines?
Just a regular laptop
Does the computer on the truck show the date the change was made and time?
No but u can create a work order if u want to show that
2 questions.
Can you do this in “simulator mode” ?
And what kind of cable is it that connects into the laptop?
No not in simulator and it's a Cummins plug in
How much is that software?
Adjusting the governor speed but not the cruise control speed was a dick move lol
What about Double Tap?
What software is this?
what tool did you use and program if you don't mind telling me
Cummins insite
Hi
I need download cummins software calibration cummins ecm
Hey brother you are doing good
Thank you
Do you have to have a code to increase The speed
U don't need a code unless there is a password to get into the ecm
Hi
I have Cummins diesel engine of generator..
How can i control the engine speed?
Thanks
I'm not sure I don't deal with generators sorry
Спасибо
Hello nice video, I had also figured out how to do this with my trucks but on one truck that parameter change is locked so I can’t change it myself. It was tuned and I believe the tuner locked it for some dumb reason. You don’t happen to know how to unlock or override it somehow would you? I believe I’ll have to get a new tune for it but asking just Incase. Thanks
What is your truck
@@dirtydieselnation8826 2013 Volvo vnl cm2250 Cummins
@@benkolosov6177 it may be the tune wants that blocked or if you return your truck back to factory settings then retry the tune it will fix the issue
Can you use this on a Dodge 2500 cummins
I've never done it myself
Can you tell us Where we can find this software . Any link
Right on the Cummins website
I took my truck to the dealership for a programming.
It didn't work, they tried twice! any idea what is going on? 2009 peterbilt 335 px6
They don't know what they r doing or u have a computer problem as in its locked or just ain't receiving data from the computer
@@dirtydieselnation8826 They said that there was no problem. They said that they removed all speed restrictions, but there was no improvement.
Then they didn't do it right
@@dirtydieselnation8826 I'll have to find someone else! It's weird because the truck is like new with very, very low miles! I thank you for your time
What cable do you use with insite? Thanks
Inline 7
hi there from where i can buy the software pls thx u or do u know a shop that can do it thx
You can buy it directly thru cummins
Are you willing to do other trucks?
Where u located
@@dirtydieselnation8826 Jackson tn
How to increase fuel average
Its funny how a driver can ditate how fast he wants to go in your truck. Speed will not get you there faster than traffic allows. The faster you go the more fuel it consumes more stress and wear and tear on your equipment. Any business owner operator knows this, plus safety is now minimized.
Guess you've never driven a governed truck.
Just because the top speed has been adjusted doesn't mean you would drive wide open.
You don't drive your car wide open even though you can.
Correct ?
U didn't show how u connected ur laptop to the truck...
Plug it into the diagnostic plug under the dash
Anyway to Pm you?
Is there anything you need
I have frhgetliner m2 can't go more then 60mph when I open softwar I have 75mph set crus 70mph but I can't move more thn 60mph
You may have the wrong tire size put in the parameters