Mike, thank you very much. This video made me learn inside depth of understanding and learning how to use insite. Can you make a video explaining the dpf regeneration analyzer test and what the difference is between dpf regeneration and dpf regeneration analyzer test@@freebeerandpizza2008
Mike, thank you very much. This video made me learn inside depth of understanding and learning how to use insite. Can you make a video explaining the dpf regeneration analyzer test and what the difference is between dpf regeneration and dpf regeneration analyzer test
Hi, I need to activate oem side of CM2150 to control retarder, The retarder needs to be shut off when accelerator is active. Can you point me in the right direction?
Most Jake settings can be controller on insite for Cummins. But if you want to adjust oem side for Peterbilt, Kenworth or freightliner you have to use oem program for each manufacture
Have a question for you? how can I reprogram a Instrument cluster? I have a new cluster but don't know where to do reprogram and see if the new cluster will be accepted
Hi! If I replace the injectors on a 2015 Peterbilt ISX 15 do I need to recalibrate and if so, how? I was told to get that barcode off the injector and enter it. Thanks.
Yes there will be a bunch of numbers on the coil/top part of the injector. You will enter the injector code into advanced ecm data on Insite. Make sure you perform the fuel injector reset afterwards
What is the engine state when it’s low on power? You can upload it here to this google form. forms.gle/v7oZJew4miinE1yx6 Or email it to dieseltruckrepair@icloud.com
I know you program the older vp44 trucks from 98-2002 but I don’t think you can program the 2003-2005 trucks with Insite. I have been told the 2006 and up trucks are able to connect to Insite.
There should be an icon on your desktop that is just the black Cummins c logo and says update manager. Open that and click the green circle to refresh and check for updates on insite?
What all parameters? As for the temperature ranges are you looking for the cold, hot and intermediate? Let me know I can make a video or send you all the info.
Is there a way to setup or make the Unit time show the date on the engine abuse history to see about the date/ time or the accurate engine hours that the engine was abused.
If you go into trip information you can see the total ecm time there or engine hours is also available. If the ecm was replaced it would be accurate though. I’ll have to look and see if there is a way to adjust the date and time.
Great video
Best Tutorial EVER!!! Simple and straight to the point 🫡🚛🚛💨💨🤘🏾🍻
Thanks for the support I appreciate it.
Thanks for taking the time to explain Cummins Insite! I'm new to this software and this is a big help!!
No problem let me know if there would be any other videos that would help!
Thanks
Mike, thank you very much. This video made me learn inside depth of understanding and learning how to use insite. Can you make a video explaining the dpf regeneration analyzer test and what the difference is between dpf regeneration and dpf regeneration analyzer test@@freebeerandpizza2008
Mike, thank you very much. This video made me learn inside depth of understanding and learning how to use insite. Can you make a video explaining the dpf regeneration analyzer test and what the difference is between dpf regeneration and dpf regeneration analyzer test
Yes next time I have a Cummins in I will work on making a video.
Thanks for watching
Awesome video😎….. thank you 🙏 so much!!!!
No problem thanks for watching. If there is any other videos you would like to see let me know and I can try to make it happen.
Good job bro
Thanks appreciate it
Hi, I need to activate oem side of CM2150 to control retarder, The retarder needs to be shut off when accelerator is active. Can you point me in the right direction?
Most Jake settings can be controller on insite for Cummins. But if you want to adjust oem side for Peterbilt, Kenworth or freightliner you have to use oem program for each manufacture
Have a question for you? how can I reprogram a Instrument cluster? I have a new cluster but don't know where to do reprogram and see if the new cluster will be accepted
On what truck? Peterbilt or Kenworth?
Hi! If I replace the injectors on a 2015 Peterbilt ISX 15 do I need to recalibrate and if so, how? I was told to get that barcode off the injector and enter it. Thanks.
Yes there will be a bunch of numbers on the coil/top part of the injector. You will enter the injector code into advanced ecm data on Insite.
Make sure you perform the fuel injector reset afterwards
I am have a lack of powe on ISX 15 . How can I send you the data log to review for me?
What is the engine state when it’s low on power?
You can upload it here to this google form.
forms.gle/v7oZJew4miinE1yx6
Or email it to dieseltruckrepair@icloud.com
Hi, if i have the inline 6 and the program, where i can buy the files to reprogram my 2004 Dodge ram ECM?
Thx Jan
I know you program the older vp44 trucks from 98-2002 but I don’t think you can program the 2003-2005 trucks with Insite.
I have been told the 2006 and up trucks are able to connect to Insite.
Is the a live data operating range spec chart?
The last time I seen a range chart on insite was 7.5 I think. I will look and see if I can find anything, if I do I’ll let you know.
When I double click on fault it brings big table and it say please use the Cummins onsite update manager to install this file. I’m lost
There should be an icon on your desktop that is just the black Cummins c logo and says update manager. Open that and click the green circle to refresh and check for updates on insite?
I need help with understanding all of the idle shut down parameters with temperature ranges, etc.
What all parameters?
As for the temperature ranges are you looking for the cold, hot and intermediate? Let me know I can make a video or send you all the info.
I have a problem of my cummins engine ISL9.5 .. having high rpm almost 800rpm.. i need to change using this insite tool . How?
If it’s the idle rpm go to features and parameters, change the idle rpm or low idle rpm to whatever rpm you want.
@@freebeerandpizza2008 do you have any link where i can download the insite software?
Is it this insite software is free to download.. what link?
@albertgamalo7676 no you have to buy a subscription for Insite
Is there a way to setup or make the Unit time show the date on the engine abuse history to see about the date/ time or the accurate engine hours that the engine was abused.
If you go into trip information you can see the total ecm time there or engine hours is also available. If the ecm was replaced it would be accurate though.
I’ll have to look and see if there is a way to adjust the date and time.
Where can I find this cable sir ?
I’m using a usb link 2 from unique truck. They have usb link 3 out now
@@freebeerandpizza2008 do I have to pay yearly fee sir ?
No the cable is a one time purchase
Sir so I can install for free buy cables and never pay a dime ?
No the program costs money yearly from dealer
Can you share your contacts information sir