Tried growing Rubber plant from leaf in soil ,sand and water See the result -With 100% Success

Поделиться
HTML-код
  • Опубликовано: 4 фев 2025

Комментарии • 87

  • @MeetMalli
    @MeetMalli Год назад +26

    only leaf propagation will not generate a plant only roots will grow waited for 1.5 years roots were like more than 1 ft long but no stem has ben generated. To propagate a new rubber plant stem is required with leaf.

  • @felipetoledo1339
    @felipetoledo1339 11 месяцев назад +7

    A new plant is not going to sprout from leaves only, it must have a node.

  • @GunmaWithMahi
    @GunmaWithMahi 6 месяцев назад +12

    I tried with single leaves and the other one with node. One with the node survived but the single leaf is waste only. In different pots i tried with leafs but you can’t propagate with single leaf

    • @LushFoliage
      @LushFoliage 6 месяцев назад +3

      yes ..
      new rubber plant will not grow from single leaf ..it will stay just like that with roots and eventually die ..you need a part of stem to grow a new plant

    • @SHARKiii-g2p
      @SHARKiii-g2p 5 месяцев назад +1

      I think for leaf they add some fertilizers may be

    • @alimola804
      @alimola804 4 месяца назад

      yes

    • @eshafotedar4559
      @eshafotedar4559 4 месяца назад

      You need a node of a plant to get a new plant in rubber varieties

  • @ennyerdiyanti9644
    @ennyerdiyanti9644 2 года назад +3

    In all of media can be used well
    That's great

  • @mariadsouza2600
    @mariadsouza2600 Год назад +7

    Please show us the later results, did the plant grow without a node.

    • @johnsonengleng
      @johnsonengleng  Год назад

      sure

    • @LushFoliage
      @LushFoliage 6 месяцев назад +2

      new rubber plant will not grow from single leaf ..it will stay just like that with roots and eventually die ..you need a part of stem to grow a new plant

    • @ozguncemciftci8353
      @ozguncemciftci8353 17 дней назад

      @@johnsonengleng lyer, without a node you can't produce a whole plant

  • @Leradelie
    @Leradelie Месяц назад +3

    What happened after the leaves were planted in the soil? Did they grow a stem?

    • @aerobique
      @aerobique 23 дня назад

      no, they will die off. the cutting need to keep a little part of the stem to be able to become a plant

  • @AgahDelatorre122774
    @AgahDelatorre122774 2 года назад +4

    Thank you for sharing

  • @jaspinderkaur4886
    @jaspinderkaur4886 4 месяца назад +4

    Mene bi single leaf pani mein leagiya tha roots aa gai thee fir mene use miti mein lega dia March mein par abi ruk koi bi growth nahi hui abi tuk seven months k baad bi plant nikle ga k nahi btana please

  • @Suculentastipsmemy
    @Suculentastipsmemy 7 месяцев назад +1

    Wow increíble video ❤❤❤

  • @Nagima-i7h
    @Nagima-i7h 11 месяцев назад +6

    Very great lm also want to do it hello lm from Uzbekistan kazak l love flouers

    • @johnsonengleng
      @johnsonengleng  11 месяцев назад

      thank you so much

    • @renubisht1629
      @renubisht1629 8 месяцев назад +2

      Don't waste your time this is not happen.

  • @SravanKumar-mq8zn
    @SravanKumar-mq8zn Год назад +4

    Are you sure about the process because in past i was trying to propagate using leaf but its not happening insted of that that leaf got slowly decomposed.if its really works so what are the main precautions i need to take can you please suggest in this case

    • @scarlettalquijay3818
      @scarlettalquijay3818 Год назад +8

      This process doesn’t give you a new plant. It gives you a rooted leaf that slowly dies.

    • @aysek.6109
      @aysek.6109 Год назад

      Same here it has been sitting in the water for weeks but not a single root 😞

    • @ghengis430
      @ghengis430 Год назад

      Mine's been a week, loads of roots, but seeing all the experience, I'll just chuck them out and leave the one with the node.

    • @renubisht1629
      @renubisht1629 8 месяцев назад +1

      This happen only in RUclips. My leaf also decompose In 2,3 days.

    • @Rachel_Estrada
      @Rachel_Estrada 7 месяцев назад

      Did you use the fresh, healthy aloe plant

  • @mariavegarosaleslopez506
    @mariavegarosaleslopez506 2 года назад +3

    Todas las plantas las pones en arena

  • @HarjitSingh-fz3fr
    @HarjitSingh-fz3fr 4 месяца назад +2

    1:14 - single leaf in water didn’t work out - any idea???

  • @nevermind714
    @nevermind714 6 месяцев назад +1

    After seeing all the comment to grow with a tiny bit n of stem plz let me know by n ow whether it propogates with the leaves??

  • @LushFoliage
    @LushFoliage 6 месяцев назад +2

    new rubber plant will not grow from single leaf ..it will stay just like that with roots and eventually die ..you need a part of stem to grow a new plant

  • @radhikagamit3958
    @radhikagamit3958 4 месяца назад +2

    Patte se podha nahi banta sirf zade hi niklti he

  • @愛莎-l4w
    @愛莎-l4w 2 года назад +3

    Green Party 💛💛💛😆

  • @pm20061
    @pm20061 Год назад +2

    But it won’t grow into a plant! As long as you’re ok with a rooted leaf, it’s all good.

  • @manojgardening1943
    @manojgardening1943 2 года назад +2

    Thanku sir 👌

  • @GlobexCorporationHank
    @GlobexCorporationHank Год назад +21

    All that wasted effort. You can only grow a new plant if you take a piece of stem with a leaf and node. Its not that difficult. Do not do what is shown in this video. He just threw away 3 possible new plants.

  • @christinafowle
    @christinafowle 7 месяцев назад +1

    Very tough plant 😊

  • @sahilbagga7362
    @sahilbagga7362 9 месяцев назад +1

    How much time watering in sand pot??

  • @SayantaniMajee
    @SayantaniMajee Месяц назад +1

    For me the roots are coming, (water propagation), then the existimg eaves are turning yellow, what would be the reason?

    • @aerobique
      @aerobique 23 дня назад

      this video is nonsense. quite remarkably so....
      you simply need to keep a little part of the stem if you want it to become a plant that can survive.

  • @b.j.817
    @b.j.817 2 года назад +2

    Do you have an update on these leaves?

    • @johnsonengleng
      @johnsonengleng  2 года назад

      Yes

    • @yogeshchadda8448
      @yogeshchadda8448 Год назад +8

      Its leave can produce roots but it’s not possible that a single leave can produce a new shoot , so don’t waste your time, you can use a stem having a node area to produce roots and new shoots .

    • @b.j.817
      @b.j.817 Год назад

      @@yogeshchadda8448 Thank you, good advice.

    • @hanaphilosophy
      @hanaphilosophy 3 месяца назад

      @@yogeshchadda8448 why? I have grown so many plants from leaves only without any nodes

    • @RPast-qq1xn
      @RPast-qq1xn Месяц назад +1

      ​@@hanaphilosophy
      Yeah, but specifically plants of this species? Not all plants follow the same rules, friend. Different species have evolved to adapt different propagation methods to suit the environments they were in.

  • @KiranVerma-cu3ei
    @KiranVerma-cu3ei 8 месяцев назад +1

    Nice

  • @هايداي-ظ3ط
    @هايداي-ظ3ط 10 месяцев назад +1

    😂 بس يدفع جذور ميطلع نبته

  • @priyankaengheepi280
    @priyankaengheepi280 2 года назад +2

    The one which you've grown in water do you chnge the water regularly?? Please reply

    • @johnsonengleng
      @johnsonengleng  2 года назад +2

      yes no need to change till the roots establish..after rooting we can change

  • @pascalhuynh5022
    @pascalhuynh5022 Год назад

    Hello. Thank you for sharing your experience. I remark that you propagate by a leaf in the sand filled with water. You don't need to drain the water with a hole in the container.

    • @LushFoliage
      @LushFoliage 6 месяцев назад

      new rubber plant will not grow from single leaf ..it will stay just like that with roots and eventually die ..you need a part of stem to grow a new plant

  • @jashimuddin-fp4xi
    @jashimuddin-fp4xi 7 месяцев назад +1

    ধণ্যবাদ

  • @ТамараСаакян-б9ч
    @ТамараСаакян-б9ч 6 месяцев назад

    И что ? Только корни и даст больше нечего ! Лист будет жить голами и пропадёт, лишний трата времени больше нечего.

  • @jashimuddin-fp4xi
    @jashimuddin-fp4xi 7 месяцев назад +1

    কোথায়পাব

  • @ariefbonsaikelapa
    @ariefbonsaikelapa Год назад +2

    Terimakasih sharing videonya kawan

  • @kaorupollysawada
    @kaorupollysawada Год назад +4

    I tried the leaf in water...it just had roots, that's it :(
    Eventually it just rot, didn't grow :(
    It should have at least 1 node for it to properly grow/propagate.

  • @celestinapena3601
    @celestinapena3601 2 года назад +2

    EL CANAL ME GUSTA NO PODRÍAN TRADUCIR AL ESPAÑOL GRACIAS SOY DE ARGENTINA BUENOS AIRES GRACIAS

  • @ashwinikalokhe
    @ashwinikalokhe Год назад

    After one moth also water color didnt change

  • @fivistefan1725
    @fivistefan1725 Год назад

    Da dar sa crească și unmugur

  • @dogentertainment8178
    @dogentertainment8178 Год назад +2

    Yes its definitely grow you can take one single leaf 🍃and keep it in the water 💧 then leave it for 15 to 20 days you will see the roots

    • @LushFoliage
      @LushFoliage 6 месяцев назад

      new rubber plant will not grow from single leaf ..it will stay just like that with roots and eventually die ..you need a part of stem to grow a new plant

  • @arminnventures9756
    @arminnventures9756 9 месяцев назад +1

    Stop wasting our time.

  • @AliAli-n3e3t
    @AliAli-n3e3t Год назад

    كم تاخذ وقت للتجذير عندي ورقه صار شهر بالماء منتعشه لكن بدون اي بوادر تجذير❤😊

    • @hanaphilosophy
      @hanaphilosophy 3 месяца назад

      1-4 months receiving daily sunlight, otherwise it may take longer or fail

  • @FerenjJirata
    @FerenjJirata Месяц назад +1

    Fals

  • @yennyhenriquez6830
    @yennyhenriquez6830 8 месяцев назад

    Nunca fue verdad

  • @Life-mn2wd
    @Life-mn2wd 11 месяцев назад

    9

  • @mynote2890
    @mynote2890 Год назад

    Not real 😂