Oh i get whats happening. I wear my watch on right hand. The charge handle is on the right side. The barrel is too short tho. The stl was broken so i improvised. The model on thingiverse is updated now. www.thingiverse.com/thing:3756834
Besides the short barrel and the AKM slant brake this is a really good model. Im pretty sure some type 3’s were retrofitted with slant brakes though so that’s not really even a problem.
I got the models in the wbsite that you shou but now what I do? How I can build one replica like this that you show in this video? I now that this can seem ridiculous but I realy wanna have one model like this.
I love zvc's 3d gun model. All of His gun models are very realistic and actually operates like real guns except for shooting parts. Even though they can't shoot but it's still impressive of how he can make all of his gun operates even though they were consisted of plastic parts.
Except that this is AK is somehow left handed so call it, meaning in theory if he used real AK part models to make it he had to flip them all well mirror them all.
Hell yeah! Only point of criticism is that the front sight block is on backwards. I'd love to have the tech to just print any replica I wanted. This would be really fun to build anything.
@@davidblakeman1701 pretty sure it is when you look in the background and see all the words flipped. he's holding it with his "left" hand until you realize it's inversed. the front site block IS on backwards (slant should be on the other side) but the charging handle and selector are correct because, again, the camera is flipped.
Barrel is oddly short. Both AKM and AK-47 have bigger gap between front sight and gas block. Otherwise quite cool and accurate replica. It even has a working hammer.
@@arkadiusztrzesniewski4237 Im a lefty and I shoot almost exclusively aks instead of ars because the design of the ak is already insanely lefty friendly. Some right handed people put charging handles on the left side of the rifle and cut a hole in the dust cover just to be more right handed friendly.
If you were a real ak expert. You would notice that pistol grip resembles a bakelite grip and the handguard has a palm swell and the model features a less obtuse front sight block. All features of the AKM on what appears to be a milled receiver, a receiver belonging the milled ‘47’ series of kalashnikov, the rectangular scallop above the mag well lets you know and the dust cover has a flat surface. If you want to be an A Hole about some guy just making a 3d model of no particular ak. Then at least point out professional flaws in the model other than “barrelsh to shhlort, it needsh biggah gahp.”
@@lgbtqisahategroup9781 This were merely first things I ve noticed...Because they stand out on footage. I can see more of that. Front sight seems to be inverted. Whole dust cover/bolt carrier/ receiver is likely to be mirrored. I am not an asshole. I praised that project,I considered it cool and accurate, haven't you noticed? Judging by your nickname, you are more likely to be an asshole, seeing commies everywhere, like it was 1950's McCarthyism USA.
aside from the ejection port being on the wrong side, the sight block being on backwards, and i think thats an ak74 magazine? aside from that, thats sick af!
Just a general pointer from a gun nerd. The receiver and the gas block are from 2 different AKs. The front half is an AKM while the receiver is a type 2 AK. And that's only pointing out one small non crucial flaw. The magazine is also wrong, but that mistake is acceptable. Just remember to flip the front sight block. Other than that, it looks good.
Nice I would like to see you make a colt M2011 next Or even put a DIY red dot reflex sight that will actually work like the real ones do on it 👍 Edit: the sight can simply be 3d printed
to anyone thinking this isn’t mirrored it is you can tell because of the pictures in the background because the letters on them are backwards meaning it’s mirrored
tbh as a lefty I do like the AK precisely for that. Like, I don't need to do that weird cross-arm thing right-handed people do to rack the charging handle, the only thing I find objectionable is that the fire selector is awkward to use, however in more modern AKs they have like a small thingie on the back of a fire selector to allow you to switch it with your left hand.
Why I want a 3D printer from my parents: 1. I could make toys and sell them to the kids in the neighbour hood and school 2. I could make stuff rather then buying it 3. Can set a 3D printing business
Something cool that you can do is inside the gun you could put rubber bands around the charging handle so you don’t have to manually push it back and forth
I dread to think how many hours that took to print, but I bet it was worth it. Just remember to paint the tip orange as I’m pretty sure it’s illegal to have a gun model without a painted tip
Those 3D guns cannot be fired in Korea, but I think they will argue that they are dangerous. (Korea: You can't shoot it, but it's a mock gun so it's dangerous.)
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
Oh i get whats happening. I wear my watch on right hand. The charge handle is on the right side. The barrel is too short tho. The stl was broken so i improvised. The model on thingiverse is updated now.
www.thingiverse.com/thing:3756834
Besides the short barrel and the AKM slant brake this is a really good model. Im pretty sure some type 3’s were retrofitted with slant brakes though so that’s not really even a problem.
Can you send me another one
will you share aa tutorial?
I got the models in the wbsite that you shou but now what I do? How I can build one replica like this that you show in this video?
I now that this can seem ridiculous but I realy wanna have one model like this.
@@politician06 you just need a 3d printer
Left handed Kalashnikov can't hurt you. It doesn't exist.
Left handed Kalashnikov:
CS AK:
Боюсь представить что будет если технологии 3д принтера дойдут до Афганистана
Апаххахаха
Outside the fact that this is mirrored, as in, it ejects out the left side, it's pretty cool
could just be the camera.
@@CoremanitetheNeko That would mean his watch is mirrored irl haha !
It's just unfortunate that he put the front sight block on backwards.
maybe us lefty folk dont wanna burn the fuck out of our right arms
like no hes using his left hand to cycle the gun, there are no lefty handed aks haha
Never seen a left handed AK-74 before
this may have been written off from a model from cs1. 6
og counter strike and stalker
Or the video is reversed
I love zvc's 3d gun model. All of His gun models are very realistic and actually operates like real guns except for shooting parts. Even though they can't shoot but it's still impressive of how he can make all of his gun operates even though they were consisted of plastic parts.
i mean, it leaves a lot to be desired
doesn't mean it's not impressive, but still
Yet.
They cant shoot, Yet.
Except that this is AK is somehow left handed so call it, meaning in theory if he used real AK part models to make it he had to flip them all well mirror them all.
@@lacothebest3191 or make a left handed ak :)
The only inconsistency is that there is a last round bolt hold open
You are by far one of the coolest dudes ever
That looks great, I would love to paint it. Looks really solid unlike my plastic model one from way back in the 1980s.
Cool, can I have the model?
www.thingiverse.com/thing:3756834
@ thx
@ thanks bro love you so much thanks
@@BRODUO2 ayo watcha gonna with this model Pablo????
@ cool
Honestly just add a spring to the charging handle and it would be super fun to mess around with. great stuff man
Hell yeah! Only point of criticism is that the front sight block is on backwards. I'd love to have the tech to just print any replica I wanted. This would be really fun to build anything.
Also the fire selector/safe is on the wrong side
@@MatiasPalacios2 yeah! Everyone’s talking about how accurate it is even though the bolt is coming out of the wrong aide
@@davidblakeman1701 guys, the camera is reversed.....
@@Snipermann02 I don’t think that’s how it works
@@davidblakeman1701 pretty sure it is when you look in the background and see all the words flipped. he's holding it with his "left" hand until you realize it's inversed. the front site block IS on backwards (slant should be on the other side) but the charging handle and selector are correct because, again, the camera is flipped.
That is so cool that you can just make that from home! Nicely done!
Barrel is oddly short. Both AKM and AK-47 have bigger gap between front sight and gas block. Otherwise quite cool and accurate replica. It even has a working hammer.
also change left and right side of the gun lmao
@@tddd2636 Indeed. It's lefty-friendly version of ak. At least now even left-handed shooters can enjoy wielding this iconic firearm!
@@arkadiusztrzesniewski4237 Im a lefty and I shoot almost exclusively aks instead of ars because the design of the ak is already insanely lefty friendly. Some right handed people put charging handles on the left side of the rifle and cut a hole in the dust cover just to be more right handed friendly.
If you were a real ak expert. You would notice that pistol grip resembles a bakelite grip and the handguard has a palm swell and the model features a less obtuse front sight block. All features of the AKM on what appears to be a milled receiver, a receiver belonging the milled ‘47’ series of kalashnikov, the rectangular scallop above the mag well lets you know and the dust cover has a flat surface. If you want to be an A Hole about some guy just making a 3d model of no particular ak. Then at least point out professional flaws in the model other than “barrelsh to shhlort, it needsh biggah gahp.”
@@lgbtqisahategroup9781 This were merely first things I ve noticed...Because they stand out on footage. I can see more of that. Front sight seems to be inverted. Whole dust cover/bolt carrier/ receiver is likely to be mirrored. I am not an asshole. I praised that project,I considered it cool and accurate, haven't you noticed? Judging by your nickname, you are more likely to be an asshole, seeing commies everywhere, like it was 1950's McCarthyism USA.
This is how American students use the 3D printer at school.
You should go paint it and NOT wave it around outside.
But seriously, props to you, it's quite realistic to the actual model.
Please tell us that pun was intended.
Dont wave it outside... unless you wanna impress the popo with your 3d printing skills
@@ChrisD__ It wasn't
@@Deimos_PeanutFlavour what pun?
@@kaiserluch9322 because the Ak was 3d printed, it was a prop gun.
aside from the ejection port being on the wrong side, the sight block being on backwards, and i think thats an ak74 magazine? aside from that, thats sick af!
Just a general pointer from a gun nerd. The receiver and the gas block are from 2 different AKs. The front half is an AKM while the receiver is a type 2 AK. And that's only pointing out one small non crucial flaw. The magazine is also wrong, but that mistake is acceptable. Just remember to flip the front sight block.
Other than that, it looks good.
Everything is flipped over to the wrong side also.
@@Isaac-ho8gh that's because the video is flipped...
@@beeopper no its not, everything else aside from the gun would be mirrored too lol
@@Isaac-ho8gh yes it is
@@beeopper then why's his left hand on the left side of this 3D printed gun?
Its good just need springs and some polish at the chamber would make it a lot more better
Wow! AK from S.T.A.L.K.E.R edition! (the shutter of the Kalashnikov assault rifle is located on the right)
they are on the right mostly for left handed people (well i think)
@@christopherchu2275 They are only produced with charging handle on the right. Although there are modifications out there.
Bro got the CV-47
Oh it holds the bolt back because there is no recoil spring, you had me hard for a second 😂
I mean you can add a spring
You deserve way more subscribers this is awesome
The charging handle and safety are on the wrong side of the receiver, but other than that, it looks good.
his watch has numbers backwards and the words in the picture frames are reversed he must have Mirrored the video some how
@JOE SMITH inverted/mirrored tomatoe tomoto but thank you
@JOE SMITH all good is that a bear creak arsenal i saw in the video ?
@JOE SMITH sweet deal
when your game isnt fully loaded yet
Why is the ejection port on the left side? Otherwise very cool.
Probably the video is mirrored
@@nichoindo123 its not that, the gun is mirrored, this is basically a left handed ak
@@Herpdongs aight then
its the counter strike 1.6 variant
@@ZacharyBowmanHankTheDankHill oh god don't take me back then NooOOoO!
Bro got the counter strike source ak 💀
A left handed AK 47....show that to Ian at forgotten weapons!!!!!!!!
ATF: iTs A gHoSt GuN
Never let blud cook again the charging handle is on the wrong side 💀💀💀
Can't he use his left arms?
@@Mikoto028no
@@hamburger-yh3lj then skill issues
i love it, keep it up with these functioning models. you should make a patreaon, im sure many people would support you to make these. good luck!!!
can you please make a tutorial on how to assemble it after 3d printing all the parts
its a replica just search for how to put a ak47 together lol
probably still more reliable than the AR15 platform
Left hand side charging?
Man this looks like a real mp5!!!
Nice
I would like to see you make a colt M2011 next
Or even put a DIY red dot reflex sight that will actually work like the real ones do on it 👍
Edit: the sight can simply be 3d printed
pro tip for showing how guns function: once you are sure its in the camera, demonstrate how it works without always looking at the camera
If this had a metal pistol barrel and metal gas tube to stop the plastic from melting. It would actually make it a fully functional weapon
Can we just talk about the freaking sounds in the background that sounds like solving algorithms
Family: why do you want a 3d printer ? Me:
The algorithm has chosen your wonderful video of your 3d printed firearm replica
What's funny is that in modern warfare 2023, 3D printed guns are literally put into use.
In fact, this real AKM is repainted in white paint.
When the developer forgot to paint the gun:
man he even made it looked milled and not stamped, nice
to anyone thinking this isn’t mirrored it is you can tell because of the pictures in the background because the letters on them are backwards meaning it’s mirrored
и всё равно качество лучше чем у наших реальных моделей
when the bullets fell out i thought parts of the gun were falling out and he didnt care xD
People are saying it's wrong for having the ejection port, charging handle and safety on the left side but as a leftie I see this as an absolute win
tbh as a lefty I do like the AK precisely for that. Like, I don't need to do that weird cross-arm thing right-handed people do to rack the charging handle, the only thing I find objectionable is that the fire selector is awkward to use, however in more modern AKs they have like a small thingie on the back of a fire selector to allow you to switch it with your left hand.
dude this is very cool, just inserted the return mechanism into the receiver and the finished AK-47 model
very fucking realistic modelling holy shit
Now this, THIS IS A GHOST GUN
Why I want a 3D printer from my parents:
1. I could make toys and sell them to the kids in the neighbour hood and school
2. I could make stuff rather then buying it
3. Can set a 3D printing business
Dude this just makes me wanna buy a 3d printer
Everyone playin around until this guy makes it out of metal next time
this is rad as hell dude!
Not gonna lie but when saw the bullets ejecting I thought that it broke and it was that replica's pieces and then saw it was the bullets lol
Suggestion for the slide: add a spring, it eill make the slide more real feeling and fun
Even when it's made out of plastic it's still more reliable than an M4
this is beautiful
bro
"The quiet kid in art class be like" but jokes aside props I'm not nearly intelligent enough to even print a block
If you hadn't noticed, the sight block is on backwards. It'll still work, just look off.
Not bad, just that the mechanism to put the bullet into the chamber is on the other side
The muzzle brake on that AK47 is only found on the AKM. The AK47 generally doesn't have a muzzle brake. (Let me know if I'm wrong)
Cool, that plastic replica would unfortunately be illegal where I live
we passin airport security with this one🔥
Plot twist:
This is an actual AK which is just painted white.
Mom: “why do you need a 3d printer just to make more stuff to lye around the house?”
Me : “…suuuuuuuure”
Teacher: Try to make the replica as creative as possible
The quiet kid:
Everybody gangster until he starts shooting the plastic parts at people
That one quiet kid with his toy:
The ATF must be having fun watching this guy design and print this
"No Russian"
bro got untextured version of AK47
Ah. A choice of an advid gun collector, it's a nice weapon stranger!
-Merchant RE4 (OG)
The boys at TSA are gonna get a real kick out of this one
2024, also imagine how many mags he could print for airsoft
that's a good one, like that it ejects
I thought it was breaking everytime he was ejecting I didnt know it had rounds!
was the video flipped horizontally because the ak47 is supposed to have the charging handle on the right side i think !
very nice, now add a spring in it so it can load another round without having to push forward
Me showing my 100% discount to the Cashier
0:12 "this doesn't work but look here!"
Something cool that you can do is inside the gun you could put rubber bands around the charging handle so you don’t have to manually push it back and forth
it needs a spring and paint and its the best 3d printed gun
Добавить пружину самовзвода и будет чудесно
The ATF in this video: 👀👀👀
Bro has a ufo outside his house
if you put a spring in it it's gonna be even better
I dread to think how many hours that took to print, but I bet it was worth it. Just remember to paint the tip orange as I’m pretty sure it’s illegal to have a gun model without a painted tip
It is legal in Russia.
@@TopKotXD oh really? That’s cool
Looks good! Not sure if the video is supposed to be mirrored but the charging handle and safety switch are on the wrong side.
should've done the original rack, but add a spring to the back so it pushes it forward when let go
Это же легендарный Калак 12 с затворной задержкой как у М16
put a metal spring in the chamber so when you cock it back, it springs forward!
To a Californian, this is the scariest thing ever made.
The Wii Zapper that we wanted! Finally!
Those 3D guns cannot be fired in Korea, but I think they will argue that they are dangerous.
(Korea: You can't shoot it, but it's a mock gun so it's dangerous.)
The metal detectors will never see this one coming 😈
...That's an AK-74.
You can tell because (Among other things) there's a muzzle break and the charging handle is on the left side.
I legit thought that was a wii remote accessory
i heard if you add the proper insides of a gun and live ammo with it the 3D printed AK will become so much more cool and ⭐~Realistic~⭐