3D Printed Semi Auto BB G17 Pistol
HTML-код
- Опубликовано: 10 сен 2024
- Here is another 3D Printed Gun.
It is almost the actual size of real gun.
I'm so glad that I eventually made semi auto pistol that actually works.
The accuracy and power are still need to be improved.
You can get the Design for FREE, from here: cults3d.com/en...
Turn on caption to see .stl file descriptions.
If you like this video don't forget to subscribe :)
One of the most innovative models so far for airsoft! The fact you are able to make this with out screws and minimal parts with blowback is insanely impressive.
+Rep for comment, ++++++Rep for work.
MAD respect for making this free
Fr
but AAAEEEHHH MY FILAMENT SUPPLY HURTS AAAAAAAEAEEAEEAEHEEAGEGAHEHAEH..
Ok this is legit the best thing you've created, its better than a commercial GBB pistol and with a simpler design to boot. I'll definately give this a try when I get the time👍
I receive my 3d printer tomorrow, this is the first thing I'm going to print, Thank you!
I would heavily reccomend printing smaller parts first to get used to the printer before you try a project such as this. This can be daunting to a first timer and can cause failures with the prints if not done correctly
The loading mechanism looks tedious af but i am surprised it is semi auto. GJ
OMG MY GOD Dude thank you so much ive been scrolling for hours for one of these things free and i had just so often stumbled across you goodness thankyou!!!!!
printing this right now! thank you for the files :)
great content! this build was impressive! also A+ for the sick tunes
Best design i have found it looks really easy to make
YT algorithm, you are perfect!
Damn, dude. You’re awesome!!
Really cool, also this is called double action because the pull of the trigger cocks the gun, not the recoil from the previous shot. Its really impressive considering you cant make an actual semi auto airsoft gun without gas blowback
Still waiting for this man to post another video
I really enjoyed the print , the assembly is another story everything is tight and needs sanding when it's done, it's beautiful
mine shoots 1 m max, how to increse the range?
@@SadCatStudio. More rubberbands on the ejecting part of the gun. This makes it harder to cock back but it shoots farther
와...기어박스 없이 탄성만으로 세미오토 만들 수 있을거란 생각은 한 번도 못해봤는데...
can you tell me how this guns work and the mechanism
When you pull the trigger
1. BB is loaded from the magazine, into front of push pin
2. At the same time, the push pin is pushed back against rubber band.
3. Soon the the push pin is released and BB is fired.
Ah yes, Blocky Glocky, my favorite handgun.😁
I've printed the gun 🔫 and after putting magazine in, push-pin not shooting, any solutions, pls ?
Why don't you see if moving parts have enough room to move and push-pin length and position are proper.
Problem is that the rubber bands break quite easily and you'll have to keep replacing rubber bands if they break on wear and tear. Maybe there is unbreakable durable rubber bands out there.
most impressiv airsoft built. ill change some stuff and send u the files. very inspiring build fr fr
Did you change the grip?
вы самый лучший с помощью вас мои родители уважают мое хобби
Yo respect for make it it free.and one question how much filiment did it take to make?
It depends on printing setting. With 20% Infill density, Support over 45 degree angle will take about 90 meter of filament.
It has low power... but still its a epic pistol!
why is it free?
Why not. Calvin felt like making something so he made it
Can you please link the rubber band you used? Mine get cut by the hooks in the gun 😢
Frankly, it is a defect of this design.
Rubber band pushes "push_pin" and also stops it.
Rubber band stands between "push_pin" and "lock_rear" and can be damaged between them.
Make sure the joint area of "push_pin", "lock_rear" and rubber band is nice and round.
@@calvin_a awesome I’ll do that
Thanks
@@calvin_a may I also suggest you make a G43? It would be a much smaller grip for your younger fans!
I'll keep that in my mind but I can't guarantee.
what length rubber bands did you use for this build? Im making this at the moment :D
it's perimeter is about 14cm.
hey for me the trigger insintly snaps off and the barrel parts don't move around any recommendations (i have an a1)
If the rubber bands are too heavy, parts may stuck by rubber bands or broken.
The piece at 7:03 has to be manually reset for me and then it will shoot. It gets stuck all the way in and wont go back out like yours, any solutions?
1. Rubber band is supposed to stop "push_pin.stl" at proper position. Make it sure "push_pin.stl" stops at proper position.
2. "trigger_bar.stl" pushes back "push_pin.stl". Make it sure their position is correct.
How can we improve power
More rubber band will make it more powerful, but it's limited by strength or size of parts.
We need new mechanism.
Bro I friggen lov this sooooo much, just had to fiddle with sizes abit and probably different elastics ,but shit is this thing fun
Just printed super excited, having issue with the sliding action the barrel part is real stiff and doesn’t retract with elastic but other part will
Also frig, third attempt at slide fml, prob user error,
Any luck with making the barrel less stiff? I had a similar issue
@@ThatOneKid5323 yea I adjusted the thickness a tad lower it works
@@WasaMada ok, I'll try that thank you
Bro thinks he is a John wick 😂❤
Bro is.
great, but no power
Super innovative if spring can blowback
Pretty cool you should sell them, i would definitely buy 1 or 2 of them, definitely, support smaller creators😉👍🏼💯
If you would like I would sell them to you printing right now
I have a problem, when the push pin comes into action it cuts the elastic bands that I use after 3 shots, why is it?
Frankly, it is a defect of this design.
Rubber band pushes "push_pin" and also stops it.
Rubber band stands between "push_pin" and "lock_rear" and can be damaged between them.
Make sure the joint area of "push_pin", "lock_rear" and rubber band is nice and round.
Is it possible to 3d print the pellets?
You mean 6mm BB? I don't recommend that. 3d printed 6mm BB can not be as good as commercial one and it should cause problems.
Hey man, come back! I'm waiting for your improved version! :))))
how much rubberbands do you reccomend maximum ? 10 ? 20 ?
What do you mean 10 or 20? On push pin, I believe 3 rubber bands are maximum capacity.
@@calvin_a could you make an spring pistol ?
@@elitium-e4e I'm planning to make spring guns after I'm done with rubber bands.
I have a question first of all I love the speed loader what size do the bbs have to be or does it not matter and my idea is if you made a v2 that the area you hold on the gun like the grip area should have a rough texture and also be a bit skinnier front and back thanks for the ark though.
It should be 6mm BB. Sure I'm gonna make more better guns.
@@calvin_a thank you so much i find that this gun had little power and another thing to fix my finger kept hitting eject mag every time i shot
also the paperclip needs to be switched to something else
@@3dprintingtoday I used 1mm music wire, does a great job
What kind of filament did you use to print this?
PLA
@@calvin_a thank you
Hey man i printed the gun and iam having a problem with 2 bbs being stuck in the chamber any idea why ?
I believe there can be two reasons.
1. The gap between "barrel_01.stl" and "trigger_bar.stl" is too wide.
2. The magazine is inserted too deep.
I recommend you to disassemble and test those two possible reasons.
What's good about 3D printed Airsoft?
You can throw the mag like in movie and won't hurt your wallet.
Bro can you tell me the print size you use? Is it 0.10mm or what?
Nozzle Sze: 0.4mm
Cura Layer height setting: 0.2mm
Thx man
is this compatible with carbine kits?
I'm afraid not. The size is not exactly same as real one
@@calvin_a thats alright, thanks for the quick reply!
pistola com blowback sem precisar de gás foi genial
Where can i get the 3d model
It is in the description.
cults3d.com/en/3d-model/gadget/semi-auto-g17
can i just use 0.4 mm copper wire because i have no idea where to get piano wire or music wire
Copper wire should be different from music wire, I believe it will not work properly.
You want G43 (smaller)
👇
How far does it fire
I believe the effective range is about 5m.
@@calvin_a how can i find the name and 3d model of the stick on which you wound the wire, please tell me
@@emil007-_-It's magazine_spring_tool.stl.
You can get the Design for FREE, from here: cults3d.com/en/3d-model/gadge...
Turn on caption to see .stl file descriptions.
you are great, thanks for the quick answer, I have already searched the entire Internet, thank you for answering so quickly, I thought that you would not answer.🎉❤🎉❤🎉❤ @calvin_a
is the size already correct or do i have to make them bigger
The size as is is good for 6mm BB
Can you make a 3d printed sniper
In my recent video I use swing mechanism and I believe it can be quite powerful. I should be able to make a rifle with it and sniper rifle as well
AMAZING
what is themusic wire made of? im looking on amazon. also what is the item form
The music wire is stainless steel.
What do you mean, 'item form'?
@@calvin_a thanks!
Being a bit pedantic but this isn't semi auto, it's double action
Total how much filament we need for it please answer my question
It takes about 250g of filament.
Thanks for answer
What bbs are used
6mm BB
I’m hanging issues with printing slide, 3rd attempt, any tips? Needs support right
Are you printing "slide.stl"? It is recommended to print it upside down, as when it appears in the video for the first time.
@@calvin_a I got it… thanks I also lowered ramp like comment recommended, -0.8mm, still not quite right, I’m sure I’ll get there, did I mention this is my first print
No, you didn't mention it. It seems you started your printing with hard one. Good luck!
Wow really great ya ,but instead of rubber-band, try spring which will be better, if possible build a 0.68 calibre pistol with semi-auto
Hi :D i just printed your amazing weapon , and i dont know which size the ammo. needs ? where can i get the yellow bullet as stl ? or which messure do they have ?
It's 6mm BB, common airsoft ammo.
@@calvin_a TY very much :)
thx for sharing it
can you make this more powerful ?
This design has a limit. That's why I developed swing mechanism in my recent video.
I will print this and make a 1v1 duel with my cousin 😂😂
I love this pistol and I would like to see a mp5
I made the gun, but the semi-auto pin gets stuck inside the gun and it doesnt work. Respond if you can help.
If you printed all parts properly, why don't you check out if rubber band is too thick?
@@calvin_a i bought some very thin rubber bands.
Then, how about print the pin thinner? 0.2mm thinner, may be?
@@calvin_a Ill send a video: drive.google.com/file/d/1wvEoB794hx0yGy9oiLWikuEubufNYBAK/view?usp=sharing
@@ConsoleEmpire It seems the point where trigger and pin meets doesn't work properly. Cutting a bit of that point might help, I guess.
Is a new video comming soon?
Yes I'm working on next one.
@@calvin_a what will it be?
I'm trying to make something like a Zip Pistol.
How did you get the supports out of the magazine and body lol
Magazine doesn't require supports. It's max overhang angle is 45 degree.
Body requires supports, not easy to remove, yet possible.
@@calvin_a ah nice i just finished getting all of the support out i used a drill and more stuff but it worked out👍
Do you need a licence to 3d print this? I really wanna build one of them
You can print freely while it is personal, not commercial.
another qeustion what sofware you use?
I use FreeCAD.
Very good video!! Can you say me the size of the ammunition please? Thanks
It's 6mm BB
@@calvin_a ohh thanks!!
삼디프린팅에 세미오토? 오우야 너무 야해
i have a few qeustions 1 where get music wire 2 can you make the magazine bigger 3 can you make a more magazines for 1 print thanks f if you locked on the comment
1. You can find them on online shopping mall, like amazon.
2. I think it's possible, but I'm thinking of new one.
3. You can do that with your 3D print software.
@@calvin_a thanks
my trigger gets stuck back, any suggestions?
It may be a size issue. Make sure parts around trigger.stl and relevant parts which move together with trigger.stl is big enough to let them slide smoothly.
alright will do ty, I might resize the rampp just cut off like .8 or so mm of the top@@calvin_a
lowered the ramp by .8 mm and i think sanding a bit of it off with a file will make there be no resistance, Thanks.@@calvin_a
COOL 👍👍👍👍👍😀
whats the range
I believe the effective range is about 5m.
now make a real one (i forget who makes the best frames rn)
Это пистолет для доктора. Доктор раздаёт таблетки метко.
Almost fine tuned….third goddam trigger ffs, any tips about that? Maybe my elastics are tooo strong?
Does "trigger.stl" keep break? If so, Check out printing direction.
It is recommended to print "trigger.stl" side to bed,
as when I put it on the desk for the first time in this video.(03:28)
It requires supports.
@@calvin_a thanks bro, me n my son are really loving the build, we loved racking this sucker back that first SnapBack mannnn, p.s son asked you to make a switch for it lol
Why does it look so much like Lego omg
Really? Because of the color?
@@calvin_a maybe the blockiness
красавчик!!!
yo where do you get those rubber bands?
I believe you can buy them online or at stationery store.
the pusher pin keeps braking for me any tips?
If you mean it stucks, make it a bit shorter.
Break? why don't you change printing direction or infill rate?
if put a less powerful rubberband on it it wont brake but it wont shoot very well
I'm sorry. We need better mechanism.
i was wondering if the magazine needs supports
@@calvin_a
@@Airducky1 No, magazine.stl doesn't need supports.
Set printing direction as it appears in this video for the first time(08:40).
how should i improve power?
The more or harder rubber band will improve power, trigger pull weight will increase as well.
However it is not that simple. More space is needed for more rubber band. relevant parts should be strong enough to stand the power.
I'm trying to make better and more powerful guns.
wat bullets did you use ????
6mm BB
@@calvin_a ok thanks
how many bb's does the magazine hold?
It holds 9 bbs
@@calvin_a thank you for answering!, just curious to hear, are you working on anymore airsoft projects? if you are when do you think they will be done and how much will the stl files cost?
@@averagetf2player277 I'm thinking of new mechanism, but I'm not sure how much it will take, It will take at least a few months. I'm busy doing something else for a living :D
So far I'm planning to keep the stl files free.
@@calvin_a thank you for keeping them free :) only a few months? I expected a lot more time. Just out of curiosity what do you use for modeling? good luck with your job and have a great day :D
@@averagetf2player277 Thank you for your concern. I use FreeCAD.
add more strong rubber
how do i make it not have gbb
and will it be anle to handle higher strength rubber bands
@@ishaanyadav3552 To handle higher strength rubber bands all relevant parts need to be strong enough. Since they are small plastic parts, maximum power it can handle is not very high.
Where is music wire from
I bought it on the internet. I believe you can buy them at your favorite online market.
@@calvin_a can you send a link maybe?
It's local market, they don't sell overseas.
Ok thank you would you be able to find one in the us a link for us because im14 and not great at this stuff
Why don't you try a keyword "music wire 0.015" on amazon.com?
DE QUE TAMAÑO SON LOS BALINES PLASTICOS PORFAAA
It's 6mm BB
Is this printable on any ender?
CREALITY Ender Series? It should be, if the size is big enough. I made this with Ender 5 Plus.
@@calvin_a ok thx for telling me i have an ender 4 i think
I used Prusa MK3S+
Can you make 1911 3d printed?
I wish I could.
I made many promises and I'm not keeping it.
I'm trying to make a new firing mechanism. If I succeed, then I can consider make 1911 pistol.
Any idea what I can do to fix this issue? I was thinking to maybe make the piece longer? Like makes no sense if u used same dimensions and it worked? ruclips.net/video/com8L2ovprg/видео.htmlsi=uKo3ob_YMn8MMyaw
"trigger_bar.stl" should be free to swing up and down a little bit. It should swing up when we pull the trigger.
@@calvin_a pretty sure it was a elastic issue, lastly any leads on printing some rounds? I’ve found two on thingiverse but they don’t print correctly,
I'm thinking of new gun with new mechanism. I'm not sure if I can make it.
Can we have the files?
There is a download link in description.
is this airsoft or bb
This is not airsoft. This is rubber band powered. bb is pushed directly by 3D printed plastic pin.
@@calvin_awill airsoft pellets work
If the pellets are 6mm sphere it may work.
Bro maded a glock for prime
🔥💕👌👍
Ps what is the song, I hate being broken….rub it in like lotion replayed this video soooo many times that I love this song even screen recorded it to play lol
Songs are all from RUclips free audio library.
Fat Man - Yung Logos
Born a Rockstar (Instrumental) - NEFFEX
Winning - NEFFEX
Piano Trap Beethoven - josh pan
Till I Let Go - NEFFEX
Don't Turn Back - Silent Partner
You can find this songs on RUclips.
Its very nice can u send the data of that to make
There is a link in description.
Hi can I sell this model?
NO.
Thanks for the reply even if I sold it printed?
It's copyright. It is supposed to be printed and used personally.
@@calvin_a ok thanks
@@calvin_agood answer hehe
Not BB
#NoGunSafety--