Had big trouble building this due to the poor quality of plastic. Especially the hands. What did you do to make the fingers solid enough so that they won't fall off?
Yes, it's inexpensive, and the quality isn't as good as Bandai's, but in my building experience, it's fine. There's a little ache in the hands, but it works out fine.
good day, yes a lot of pieces have a fitting issue but that's fine you just need some tools to build it and sanding is a must for this kit in my experience I didn't use any glue on my builds just take more time to sand the parts on and you'll be fine. enjoy building.
I really like your stop motion build processes. How long does it take to film the build, stop motion captures and all? Also do you have any plans on doing the daban mg ver ka full armor unicorn?
It takes 3-6 days, depending on what else I have going on, and I also want unicorn full armor, so it may take longer in the future. I'm glad you enjoyed it, and I'm working on a new gundam, so stay tuned.
I already have daban 8812 as my first bootleg metal build that i ever build. It's complicated because no manual and decal map inside the box. And the the snap fit what I expect from bootleg.
some reviewer found out the difference are the remodel shoulder (its better) and the backpack (simply no longer with 2 beam sabers ) yeah thats all i guess
In my experience, it is not hard to build. It doesn't need to be sanded entirely; the other parts and fittings are okay; it's just that the plastic is so thin in comparison to other Daban kits. happy building.🙂👍
The fin placement is one of the most ridiculously unsecure fitment. My gawd.
Nice review
The parts that have to be sand out is because most daban parts are connected to the back side of the part not the side
Hi my other account
I love the build and the video so much, requesting for the daban 6649 blue frame
@@knightmontebon8238 ill try to add that one on my list. thank you
nice vedio bro good job i like it build more bro dont stop enjoy.hehehe
Thank you, never stop building or doing what you love. stay tuned 👍🙂
Had big trouble building this due to the poor quality of plastic. Especially the hands.
What did you do to make the fingers solid enough so that they won't fall off?
Another amazing one. I was considering to buy yhis kit because how cheap it is. But i only heard bad things about the build of it...
Same hesitate to buy this cuz of the issues but i want those katana.
@@pptx08 ohh especially those katanas and the strike pack
Me I'll probably buy these because i have 2 knives 2 katana a stand a transformable wing sword and a bow and 2 long sword
Yes, it's inexpensive, and the quality isn't as good as Bandai's, but in my building experience, it's fine. There's a little ache in the hands, but it works out fine.
There are a lot of weapons in this kit 👍
If you want to build bootleg for first time don't buy this kit but if you is professional in build bootleg buy this kit
I had bootleg hg as first gunpla but the hardest one I build is metal build bootleg as the first MB i ever build.
I'm planning to buy this I'm only hesitating because of some tight fits but is glue needed to build it?
good day, yes a lot of pieces have a fitting issue but that's fine you just need some tools to build it and sanding is a must for this kit in my experience I didn't use any glue on my builds just take more time to sand the parts on and you'll be fine. enjoy building.
i have that kit too, but I am experiencing a problem, the blade of the sword was broken like where it supports the blade that is thr bottom part pf it
Nice vid, btw where did the piece at 6:35 (h3 and h4) go? i'm stuck at that one i cant figure it out >:(
I just ordered this kit, hopefully I will have gpod time building it. Other reviewer says there is some issues like fittings.
Yes, there will be some fitting issues. Have fun building and I hope everything goes well for you.🙂
I really like your stop motion build processes. How long does it take to film the build, stop motion captures and all?
Also do you have any plans on doing the daban mg ver ka full armor unicorn?
It takes 3-6 days, depending on what else I have going on, and I also want unicorn full armor, so it may take longer in the future. I'm glad you enjoyed it, and I'm working on a new gundam, so stay tuned.
@@DOMAKI_official Awesome, thanks for sharing! Looking forward to your next videos 😄😄
The most worrying thing is that some parts of the parts are scattered.
The only problem with this kit is fitting problem
Yes, sanding is required.
Is this the reissued version?
No, this is the old version. the reissued ver. are no box art.
@@DOMAKI_official Ohhhhhh ok, I'm actually planning to buy this kit
@@gurdy2865 as i know the reissued are better ver.
what can i do with the extra part?, some looks like a gun part
Is it compatible to swap parts like arms and tactical arms to daban 8812 ?
daban 8812 is a metal build version the tactical arms of 8812 is way better and bigger and also the arms also. I think it's not...
I already have daban 8812 as my first bootleg metal build that i ever build. It's complicated because no manual and decal map inside the box. And the the snap fit what I expect from bootleg.
What should i do with the extra part?
what to do in the extra parts?
What if inosuke Was a Gundam pilot
Any loose part?
There are a lot of fitting issues, so more time needed for sanding to make sure there are no loose components. I come across a lot of tight parts.
people are saying that the jijia one is way better hm i wonder if thats true
I'd want to help you in resolving your concern, but I'm afraid I can't because the jijia model isn't available in my country.
some reviewer found out the difference are the remodel shoulder (its better) and the backpack (simply no longer with 2 beam sabers ) yeah thats all i guess
Does it come with stickers?
yes bro,. but not that much.
Is there extra hand ??????
No, it does not have a extra hand.
Eto ba yung new and better molds daw ni daban?
no sir, this one are the old version.
My bf asked me to watch this
Coming na sa akin, mahirap ba talaga to e build? Every parts ba need e sanding?
In my experience, it is not hard to build. It doesn't need to be sanded entirely; the other parts and fittings are okay; it's just that the plastic is so thin in comparison to other Daban kits. happy building.🙂👍
Paano mo nilagay yung sticker?
@@iiamceekee3263 hindi ko nilagay yung stickers, i have plans to custom paint it before the decals.
how to do the sending my daban is in the way
just simply prepare a sanding stick. 600,800,1000, and up to 1500, and if you have a glass file that will do also.
@@DOMAKI_official what if i have 800? is it good in one go? and to the glass as well?🤔
@@DOMAKI_official never mind that sir i wanna know how do you do the sanding to the plastic?
@@DOMAKI_official is sanding paper good?
to fix the fitting issues
@@jypixel2004 yes, the higher sanding makes it more smooth.
wait ,it's kai
how to the extra part?
Lods san ka po nag order nyan😁
why is there like 5 bugs in the background and nobody talks about it
這多少錢啊?
No asmr at all
Hey sir pls read the title before saying that
asmr *UNBOXING*
*stop motion* BUILD
Bro can't read