Nice content (2) Add contrast and maybe search for some custom subtle LUTs to make the camera quality better than what it really is Contrast helps, keep it up!
screw driver size sir? waiting lang sa parts, but when I tried to open the mice, ang liit nung screw. balak bumili sa lazada ng screw driver with appropriate size.
@@clubberscycle5864 that's okay naman din. If bbili ka ng mouse, maybe you can still try if mapapagana mo ung switch replacement para lang matuto or maexperience mo siya.
I've had that issue before too. The Kailh GM Reds feel just a little bit harder to press that the stock Omron switch. If you want to mitigate this problem, try checking out the specs of the switch you're gonna get making sure that the actuation force is greater than the stock switch.
Hello! I'm not really sure if it is possible, or the process of making a wired mouse to wireless. I suggest looking into Mouse enthusiast communities as they may be of more help than I can. Thank you!
I'm not sure what temperature my soldering iron can reach but all I know is that it is rated at 40W. I might suggest you get a higher rated one as I experienced difficulties with melting the solder leads.
Hello, usually hindi na po sticky yung aalisin na skates so it would cause problems din. Using double sided tape might be helpful but wont be the best solution for the skates.
sinunod ko to video. nabili ko ung red micro switch sa shopee. kakareplace ko lng ngayon un nga lang ayaw gumana ng left click. parang walang connection na nangyayari. may mali po ba ako sa pag solder?
Pacheck nalang if natanggal yung solder pads nung inalis yung old switches, if na solder ng maayos yung contact pins, and if correct orientation yung switches.
what the hell may ganyan pa palang procedure. kulang naman pla sa steps ung video buti di ko pa ni solder ung akin. at may natatangal pala sa board kapag di maayos ang pagkakarepair. di pa naman ako marunong mag solder. Bili na lang ako bagong mouse or ibang brand hayzzz
@@clubberscycle5864 yes sir may possibility na matanggal solder pads. Hindi na ako nag in depth sa soldering part kasi mas maraming tutorials sa youtube ans better if sakanila mismo mag aral how to properly solder. Sakin lang ung steps sa pag palit ng switch.
@@roningameplays7213 dapat pala sir namention mo yang solder pad as a warning sa video hahah no idea ako ayun kalas. sobrang liit at nipis kasi. anyway lesson learned na rin sakin.
Nice content (2)
Add contrast and maybe search for some custom subtle LUTs to make the camera quality better than what it really is
Contrast helps, keep it up!
Thanks a lot for this!
important thing to mention make sure the tin is covering all the browns on the pcb near the switches legs or else it wont work
May I ask what is the brand/ model of the soldering kit you are using?
thank you🙏🙏
Great video! Thank you sir!
Can you fix my mouse double click issue on g102 light sync
screw driver size sir? waiting lang sa parts, but when I tried to open the mice, ang liit nung screw. balak bumili sa lazada ng screw driver with appropriate size.
Thenk you Frens
Soldering these switched doesn't look that difficult but also i haven't done soldering in 8years
Hey bro, I hope you respond early, what screw you using in this vid?
screwdriver is a Philips head
Thanks
i had the same issue. pero di ako medyo techy sa pag ayos i will try pa rin sundin ung video mo
Thank you so much, i hope maayos yung mouse mo.
@@roningameplays7213 bili na lang po pala ako ibang brand na mouse..walang kasiguradohan pala tong logitech mouse
@@clubberscycle5864 that's okay naman din. If bbili ka ng mouse, maybe you can still try if mapapagana mo ung switch replacement para lang matuto or maexperience mo siya.
screw driver size
can you also replace the side buttons with the same Kailh Red Switches?
yes
yes but why?
Does it make buttons harder to click? I got mine g102 and buttons are so light that I constantly press RMB just by resting my hand.
I've had that issue before too. The Kailh GM Reds feel just a little bit harder to press that the stock Omron switch. If you want to mitigate this problem, try checking out the specs of the switch you're gonna get making sure that the actuation force is greater than the stock switch.
I want to turn a hati-m g wolves into a wireless mouse, is maybe possible?
Hello! I'm not really sure if it is possible, or the process of making a wired mouse to wireless. I suggest looking into Mouse enthusiast communities as they may be of more help than I can. Thank you!
Very Nice video.
this mouse has a mechanical key switches lol?
Hello where did you buy the switches?
And Scroller too.
I know you don't go into detail about (de)soldering, but do you remember what temperature you desoldered at?
I'm not sure what temperature my soldering iron can reach but all I know is that it is rated at 40W. I might suggest you get a higher rated one as I experienced difficulties with melting the solder leads.
i did it with a cheapest solder which didn't even work after the project was over, so whatever melts your solder joint works!
@@parthpatel9602 which switches did you used?
Do you guys know what to do when your g102 got an Driver error?
kudos sa link, 2 months palang akin bumigay na kaagad switch ng g102 ko :/
question, same lang Logitech G102 Prodigy at Lightsync diba? tyy
prodigy is an older model with 6000dpi, lightsync has 8000dpi. I own both
Hi! Sir, pwede din kaya tong kailh gm red para sa logitech g304?
hello po pano po pag walang bagong skates? pwede po ba ibalik lang yung luma? thank you po
Hello, usually hindi na po sticky yung aalisin na skates so it would cause problems din. Using double sided tape might be helpful but wont be the best solution for the skates.
@@roningameplays7213 ohhh okay po salamat po.
boss may marerecommend ka na screwdriver sa shopee or lazada?
Any screwdriver na payat and as much as possible ay magnetic tip. Check Lotus screwdrivers (same sa gamit ko)
Saan mo po nabili ung soldering iron? Thanks sa guide
Nakahiram lang ako ng soldering iron at the time of filming but now meron na akong sarili ko bought from a local store.
Thanks for the Sub!
Same switch lang po ba yung sa mouse clickers and side buttons?
Same type of clicker lang pero magkaiba ng brand ung stock clickers ng logitech. Omrons main clickers (LMB, RMB) then Kailh black yung side buttons.
@@roningameplays7213 ahh salamat sa pagsagot sir!
Does anyone know where I can get a replacement for the g102 optical mouse lens ?
umm a new mouse?
san nakakabili nung white na rubber plastic na dinidikit sa ilalim ng mouse?
just search "logitech g102 mouse skates" on lazada or shopee.
Can this switch drag click?
every single switch can double click and drag click, its the debounce timer that cancels the other click and doesnt allow the mouse to register it
Kamusta naman ngayon, nag dodouble click ba ulet?
Hindi pa naman ulit bumabalik ung double click issue kahit pa almost everynight din ako naglalaro ng FPS ganes
sinunod ko to video. nabili ko ung red micro switch sa shopee. kakareplace ko lng ngayon un nga lang ayaw gumana ng left click. parang walang connection na nangyayari. may mali po ba ako sa pag solder?
Pacheck nalang if natanggal yung solder pads nung inalis yung old switches, if na solder ng maayos yung contact pins, and if correct orientation yung switches.
@@dmgfilmproductionandphotog1567 HIndi ko sure if natanggal solder pad sir, betterto ahveit checked naparasure. Sorry po i cant help much.
what the hell may ganyan pa palang procedure. kulang naman pla sa steps ung video buti di ko pa ni solder ung akin. at may natatangal pala sa board kapag di maayos ang pagkakarepair. di pa naman ako marunong mag solder. Bili na lang ako bagong mouse or ibang brand hayzzz
@@clubberscycle5864 yes sir may possibility na matanggal solder pads. Hindi na ako nag in depth sa soldering part kasi mas maraming tutorials sa youtube ans better if sakanila mismo mag aral how to properly solder. Sakin lang ung steps sa pag palit ng switch.
@@roningameplays7213 dapat pala sir namention mo yang solder pad as a warning sa video hahah no idea ako ayun kalas. sobrang liit at nipis kasi. anyway lesson learned na rin sakin.
nice content. tamang kalikot lang hahaha
Thank you sir!
Ультимативно, хо-хо-хо)
double clicker
could i do this with japanese omrons as well
Yes, I think you can. Most mouse switches look alike so you can try out different mouse switch brands and it should fit well.
That's nice but bro.. i buy this mouse for like 20$ in my country, so i would buy a new one rather than doing all this stuff xd
This is way better than a brand new mouse
If you're rich then ye but if not.. for budget savers this is a great option + experience 😁