Steff’s Clio 182 Turbo - engine removal / strip down
HTML-код
- Опубликовано: 3 окт 2024
- My high boost 182 turbo sadly decided to seize, so now its time to break out the spanners, pull her apart and get down to the problem. Time lapse.
Music - Alan Walker - Fade NCS release
Really enjoyed this mate! Looks like its been through a tough time but your putting in the graft to get it running again which is brilliant :)
Gavin Collins thank you, yes it seems with all French cars you only get what you put in. Hopefully soon she'll be fighting fit again
Hvala za video, naučio sam nešto korisno. Darko. Kraljevo. Centralna Srbija.
2 years on still a great video.I'm buying my first 182 soon and will be spec'ing it for track :)
😁 thank you, your enjoy the drive
Wooow, thats amazing.
Great job!
Cool video this, cheers for sharing!
Infelizmente no Brasil não temos o Clio sport 180 cv.
Que cor é essa .Amarelo......
Very good video mate!
Thank you
really great Video!!! THX a lot
Great video bruv!!
Darren Astbury thank you
you can try r9 fairwy or broadway rods they are cheap and handle too much power...
chaki83 thank you, the engines been fully rebuilt now and done plenty of track time, check out some of the other videos 😁
You should put a screamer pipe coming through the bonnet
A Gray as much as I really would like to the car is used regularly on track and I would struggle with noise regs
Cool video
andrew wright thank you! She’s come along way since this, worth checking out 👍🏻
Andy Greer special?
Interesting....what you app you using to edit?
ill give you a message
Where can buy that exahust????
😭
Alfrodoo S the manifold and downpipe can be bought from a couple of company’s. I would say Engine Dynamics and Ktec racing are the main two here in the UK.
J adore la couleur mais je suis étonnée qu avec un turbo il y et pas plus de chevaux il faux elargire les chemises et monter des pistons forger bielles plus gros et robuste
thank you, its a beautiful colour i think. The google translate isnt the best 😂 but the new engine is lasting much better and with the better turbo
merci, c'est une belle couleur je pense. Le google translate n'est pas le meilleur 😂 mais le nouveau moteur dure beaucoup mieux et avec le meilleur turbo
Nice òne! Great build
Haven't seen other vids but charge piping and bov aren't brill haha 😀
What clutch?
Alex Rogowski the pipings a nightmare 😂 I’m using a Helix 4 puck now
Steffrallye I need to watch more vids but how is nick Jr involved ☺
Alex Rogowski Me and Nick went to school together and both have always been into cars. I use to help him with his videos and when I decided to turbo mine I thought I’d have a go at doing my own. Sadly the engine I bought seized in a couple weeks so I ended up rebuilding it. Should have built fresh to start 😂
👌
Anything over 220bhp doesn’t work on a fwd on the track especially.
Well its been at 330+ for a few years, tbf it took some time and fettling but she handles it well now. Lots of suspension tweets was needed. On a tight short circuit she isn't to good, it's either all wheel spin or lack 😂 but most proper tracks it's all good
hi there, did you had a repair manual helping you out with the engine rebuild? if so can it be found online? Thx! :)
Hey, alot was memory but theres also AutoData for information and the forums are a great help. Most things can be found with a little help from google too! Tho I'm sure a Haynes Manual would help, tho k dont have one sadly .
Wat power u making
Hey, after all this rebuild etc today it's making 344bhp
Good video, but please don't put the same song on repeat if you ahve a 10 minute long video.
kronoCSGO 😂 yer only realised it gets a little annoying after it went up, I'll bare it in mind for future video's 👍🏻 subscribe and see 😁
Man!
Hi pleas i need programme of the ecu 182 turbo gt28 (flach of sirius 34) thanks
Hey sorry this isn't something I can do
So what exactly happened , it spun the crank bearing and cracked it? What was the cause? Were they non-genuine bearings or?
BIAWolf I couldn’t find a cause/issue with the engine. The Renaults don’t run tabbed bearings so a spun bearing can happen (tabbed now fitted) either the bearing compacted alittle allowing movement, bolt stretch? Oil starved? Either way the bearing spun, heated up and welded the engine soild. The cap had to be broke loose and the remains of the bearing cranked to free the Conrod.
Steffrallye that's interesting, I currently run a low boost 182 and I plan on building a forged engine to run 280ish but I want it bulletproof for track, are the king bearings you got tabbed then? Do you know if the ACL race bearings are tabbed ? Cheers
Steffrallye nevermind! I just realised it was your Conrod bearing not the crank bearing (big end bearing?) or whatever you call it, I saw you got it tabbed in your other video, that's interesting I'll look into the same thing!
BIAWolf yes the Conrod bearings are the ones I got tabbed, there the ones that suffer the most. I couldn’t say if the ACL Conrod bearings are tabbed best to speak to the supplier to find out. Just take your time, check and recheck measurements and try not skimp out on cheap parts (ignore my Chinese rod 😂) it’s all up a running now I’ll have to get another video together
why!?.
Cliometrics 172/182 are meant to be NA, not turbo-joke.
capitán_ camote_picante there more reliable when standard and N/A 😂
wales!? oy, ye cheeky bugger
Jagdtiger 😂😂 Yes up here in North Wales
Tips instead of music would of been cool
Definitely, was the first video I did and was more just playing with the camera. But a removal video would have been great