My professor used to say, it takes a brilliant person to keep everything simple. This is one of best and simple to follow instructional videos I ever came across. Very useful for a rookie like me. Thank you!
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
Very good video. I just purchased this kit and your installation instructions were very very helpful. I didn't know that the bar was there to gain support from your leg. Make sense.
Thanks for this video. I installed the forester 9" chainsaw blade and I'm getting a ton of vibration in the trimmer shaft. Any guidance is sincerely appreciated.
Anyone looking at this May want to look into the Echo pas “pro attachment series” it has a bunch of different attachments that can be very simply swapped out so you can use different tool without losing the other. I’m sure this gentleman sells them. Mine is the PAS 225. It’s good for home use and has all the basic attachments. Highly recommended.
One thing that you have to do on a echo 2620T is install the green spacer or washer. That's the first thing you have to do before you put on the head unit / adapter kit
When I tighten the nut on the blade, it doesn’t spin freely. Then if I loosen it a bit it will spin but it feels like the nut will just fall off easily
@@jasonwatson8350 If I remember correctly I was using the wrong piece under the blade. The blade hole wasn’t fitting snugly around the metal part. Use the new one in the kit. Hope that helps .
I will try to keep answering questions, but I no longer make equipment related videos, as we are on a new journey. I invite you to follow along at the link below. THE LOUSY FLORIDA TRAVELERS ruclips.net/channel/UCESlQbmo7K7IzF2hmEbm4Ug
And don't forget to put part "Z" on it's called the shaft collar, so it can spin freely when only using part "Y" witch is called the short-necked upper fixing plate for the 42mm shaft. thanks again for the video!
Thanks for the video...exactly what I was looking for. The Echo instructions leave a lot to your imagination. BTW, that barrier bar could potentially be dangerous too IF you're not holding the trimmer correctly sticking you right where you don't want to if you get a kickback right in the 🥜's
My professor used to say, it takes a brilliant person to keep everything simple. This is one of best and simple to follow instructional videos I ever came across. Very useful for a rookie like me. Thank you!
This is the best instructional video I have seen for installing this kit properly, thank you!
Thank you
I want you to know that no one has explained how to do this as Good as You I give you a thumbs up
This is by far the best demonstration I've seen on this model and replacing - thank you sir!
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
Very good video. I just purchased this kit and your installation instructions were very very helpful. I didn't know that the bar was there to gain support from your leg. Make sense.
Thank you for this video you are the first to explain about the purpose of the barrier bar. Thank you again.
Thank you for watching and commenting
Excellent straight forward instructions, with a voice that's easy to understand! Thanks!
Now that’s good,straight forward “how to” video …without any dumb music!👍
Thank you
Thanks for the clear and straightforward video!
I appreciate Your Genuine Spirit and knowledge shared. WELL DONE
Right on for this brother. Father in law’s outta town. I got some work to do!
Thanks for this video. I installed the forester 9" chainsaw blade and I'm getting a ton of vibration in the trimmer shaft. Any guidance is sincerely appreciated.
Anyone looking at this May want to look into the Echo pas “pro attachment series” it has a bunch of different attachments that can be very simply swapped out so you can use different tool without losing the other. I’m sure this gentleman sells them. Mine is the PAS 225. It’s good for home use and has all the basic attachments. Highly recommended.
I definitely agree with you. Thanks for watching and commenting
Thank you so much for this video I found it very helpful since I bought that same kit recently but hadn't rounded up the courage to mount it. 😊
Great video I just bought kit yesterday but they no longer sell blade with kit. So I bought triangle blade
One thing that you have to do on a echo 2620T is install the green spacer or washer. That's the first thing you have to do before you put on the head unit / adapter kit
Great instructions, straight to the point.
Thank you
Thank you
Thank you for explaining on this product
When I tighten the blade the blade doesn’t spin
You can’t use the same back piece as he did use the other one in the kit and it will work
Can it be used without the blade?
Can you change the echo edger to have the hedge trimmer?
Perfect thank you so much from puerto rico.gracias
Excellent video thank you sir.
Thank you for your positive feedback.
Great video! Thank you
Thank you for the video, very easy to understand..
When I tighten the nut on the blade, it doesn’t spin freely. Then if I loosen it a bit it will spin but it feels like the nut will just fall off easily
You need a different backing plate from your dealer.
@@lesteroliveintheshop9825 I’m using the same kit and plate as you on an echo srm 225. I’ll have another look in the a.m.
Same problem with a 225, if I tighten the nut it won’t spin
@@jasonwatson8350 If I remember correctly I was using the wrong piece under the blade. The blade hole wasn’t fitting snugly around the metal part. Use the new one in the kit. Hope that helps .
Thank you!
Thanks for the good instruction video
Great job and thank you for sharing it.
Thank you Sr, your video was very helpful
Thank you
Thank you so much for posting this instructional video...Your instructions was very clear!! ✨
I had to install the extra spacer piece on my 225 or it would not spin.
I’m having the same problem where did you put the two spacers at
I will try to keep answering questions, but I no longer make equipment related videos, as we are on a new journey. I invite you to follow along at the link below.
THE LOUSY FLORIDA TRAVELERS
ruclips.net/channel/UCESlQbmo7K7IzF2hmEbm4Ug
Thank you for a great informative video. We'll done.
Thank you
My blade ain’t spinning after I put the nut on Im not over tightening it
Did you reinstall the backing plate?
Can anybody tell me if this blade conversion kit will work on an older Echo SRM2100 model?
I don’t see my model listed on the packaging. TYIA
Thanks
Hi, where can I buy Echo gas trimmer with blade.?
Is it heavy to carry?
Not at all
Thank you sir!
And don't forget to put part "Z" on it's called the shaft collar, so it can spin freely when only using part "Y" witch is called the short-necked upper fixing plate for the 42mm shaft. thanks again for the video!
Excellent.
Awesome thanks
Thanks for the video...exactly what I was looking for. The Echo instructions leave a lot to your imagination. BTW, that barrier bar could potentially be dangerous too IF you're not holding the trimmer correctly sticking you right where you don't want to if you get a kickback right in the 🥜's
If you read the instruction and fallow him will be easy
This speed feed head also fits this model.
ruclips.net/video/W1WkNg_C_hI/видео.html
I love you
Lol, I hear ya. Appreciate you watching and commenting
$60😠😂😂😂😂😂😂
"Barrier bars"😂 😂😂 are a joke. That blade is garbage.
Thank you!