Thank you so much for this video! You saved me a lot of time! Easy to follow instructions, and I loved the notes that you had to add! Thank you, again.
Only error was to prime, you wrote " remove the intake house while the outtake house is in the tank " instead of vise versa. Love your video. Very nicely done. Thx for your help. 😊
Rifshy RnS I recently bought this one and started as you showed after 2 weeks i got lilly pipe as my tank is small like 45 20 21 And just switched off the power closed the valves and replaced with nee likly pipes but started the power but it didn't worked I removed the whole water from canister and tried its still didn't worked what would its not taking the water now
I'm redoing my aquarium and have been using the 250 for years but I'm curious why you have the tube with all the little holes removed? Is there a benefit to this or purely aesthetics?
Please help I have the EHEIM Pickup 160 in my axolotl tank . Could you please give me some advice on I could make the current less powerful because axolotls do not like current strong .
Yes can but it would be challenging to install and maneuver the hose. It is advisable to place it below tank level, typically inside the tank stand/cabinet.
Hello there, You can clean it every 2 months, depending on the bio load. If it’s a planted tank with less fish, you may go up to 3-4 months. Make sure to clean the filter with the aquarium water itself, in order to retain the beneficial bacteria. If you wash it with direct tap water, you may kill most of the beneficial bacteria, and it will take 3-4 weeks for the bacteria to establish.
Hi guy, nice video ! I'm french, sorry for my language. I have two questions for you. Does this external pump make noise? I have an 80L aquarium, I hesitate between the Eheim Classic 150 pump and the Eheim Classic 250 pump (the one you present in your video). Which one do you recommend and why ? Thank you
Does not emit any sound, the noise that you hear in my video when I turn the filter on: is the impeller startup at first, that's it, its pretty silent thereafter. Classic 150 is sufficient for an 80L tank depending on the stocking and hardscape structures that do not block the flow and create dead spots.
Sir, should i use the double tab connector for flow rate control Actually i have purchased eheim 350 classic for my 40x30x30 cm tank but the flow rate is too high for this dimension. please confirm should i half close the lever of outflow side to control the flow.
@@RifshyRnS No, you can't control the flow. the double tap connectors are not designed to reduce flow. if you try to reduce flow by closing the valves by a quarter or half, the double tap connectors will leak. Best to keep at 100% open, 100% flow.
I need your help deeply please, i bought used 250 filter but without o ring , can you please give me the details for the o ring size thickness diameter etc . Orginal o ring 12$ so i need to search for cheaper alternative o ring.
my eheim 150 makes a sound "o o o o", if i lightly touch the lid of the filter, it decreases, do you know why, please guide me how to fix this problem, thanks
I'm trying to prime mine and it won't work. It's filled canister just over half full but won't fill it anymore and I keep getting mouthfulls of tank water 🤮
Would there be any concern to turning off the filter on a daily basis? (then back on after some hours) Would it do harm to the motor long term or create some concerns on the media if it just sat around 8-12 hours with no flow? I'm considering turning off the filter overnight that's why (let's leave out why I would do that lol)
Why would you turn off the filter? Flow is essential for the beneficial bacteria in the filter media to thrive and do the job. Moreover, the circulation within the tank water column is important too.
Hello, beautiful tank. So is this how you prime?. Canister is empty, you suck on outlet hose, which creates a vacuum. Canister fills up. So you wait till water runs out of outlet pipe before switch it on?
Do not follow step by step like I did. I’m dyslexic so I struggle with my left and rights but telling people the wrong inlet and outlet is absolute joke you deserved to get banned from RUclips
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
These are called classic for a reason, they are built very simply and because of that they will run for years.
A great all round filter!
Thank you. Your fish tank is so beautiful and all videos very helpful!
Wow oooh that works so well! Love watching your amazing video's.
Thank you buddy ✌🏻
Thank you so much for this video! You saved me a lot of time! Easy to follow instructions, and I loved the notes that you had to add! Thank you, again.
I am glad that my video helped. Thanks for your comment.
Wow..Am searching for classic 250 reviews ... Suddenly appears as fresh...Good one bro
Thanks mate 😊
beauty aquarium. I dislike the included green coloured attachments though
Yeah I wish they did them all black instead
Your tank setup is simply awesome 😊 loved it 👍👍
Thank you 🙌🏻
August 04, 2021
Tutorial still works! Thank you!
You got my new pump up and running in no time, fantastic video!
I am glad that my video helped you mate, good luck.
Thinking about getting one of these for my 44 gallon goldfish tank.
At 3.38 the words should read "remove the outlet hose, while the inlet hose is in the tanks, not the other way around.
Thank you, my bad
Thanks for the helpfull vid!!! But be very sure what is your inlet and outlet 😉😉
Nice and clear review ! great tank you got too.
Thanks, Mate.
Have a good day!
Thank you so much for making this video - it helped make setup a breeze!
I am glad it helped.
You are welcome mate.
Thank you, this made setup much easier
I am glad. You’re welcome 😇 ✌🏻
Only error was to prime, you wrote " remove the intake house while the outtake house is in the tank " instead of vise versa. Love your video. Very nicely done. Thx for your help. 😊
My bad, sorry about that.
Thank you for your comment.
Have a great day ❤❤❤
Very nice and concise. Music is great!
Thank you mate, appreciate it 🙌
Very good video, thank you!
Your welcome 🙌🏻💙
Great video on the filter man thank you
Your welcome mate
Very helpful 👌
Great one boss, all the best💪💪
Thanks brother 😇
Why can't c02 hook up videos be like this. Great job. Subscribed.
Thanks mate 🙌
Nice and helpful man !!
I am glad that my video helps!
Thanks Mate 🙌🏻
Rifshy RnS I recently bought this one and started as you showed after 2 weeks i got lilly pipe as my tank is small like 45 20 21
And just switched off the power closed the valves and replaced with nee likly pipes but started the power but it didn't worked
I removed the whole water from canister and tried its still didn't worked what would its not taking the water now
@@prashantdhotre You need to prime it again, check the video at 3:25 also make sure that you've opened the valves 😀
Rifshy RnS yeah perfect valves partially closed working!!
ll send you link how it looks its 2 month old
Thanks again
Thank you, helped me a lot... 👌
I am glad that my video helped you 👍🏻
Thanks so much I was struggling!!!🙏🏽🙏🏽🙏🏽
I am glad that my video helped ✌
@@RifshyRnS it actually stop working over night! Smh
Good video bro , thank you, you help me a lot with my canister filter A++
I’m glad it helped mate. Your welcome 🤗
Show! Este canister atende aquário de 100 litros?
This is a 64-litre tank, for a 100-litre tank I suggest Eheim 350
Thank you this video helped me setup and prime my filter.
I am glad that my video helped.
You are welcome mate 🙌🏻
Thanks, very explanatory
I'm redoing my aquarium and have been using the 250 for years but I'm curious why you have the tube with all the little holes removed? Is there a benefit to this or purely aesthetics?
Hi Brother, very good video. How big is the aquarium from this video. Thanks
Hello brother,
Tank size is 60x30x36 cm
Please help I have the EHEIM Pickup 160 in my axolotl tank . Could you please give me some advice on I could make the current less powerful because axolotls do not like current strong .
is eheim 250 enough for 60x30x36cm tank? doesnt require additional equipment to increase the flow rate?
250 is perfect for a tank of that size 👌🏻
Nice setup
Thanks Mate 🙌🏻
What do you suggest for a 280ltr tank
Eheim 250 or 350?
350 for sure bro
Great, with this Good video I did the same in my client THANKS!
I am glad 💙
did you rinse the bio balls before priming? i was told they are dusty and should be rinsed before finalizing setup...
Yes, I did rinse.
Thanks man
Can this filter be placed at the same height as aquarium?
Yes can but it would be challenging to install and maneuver the hose. It is advisable to place it below tank level, typically inside the tank stand/cabinet.
Do you have live plants in that tank? It looks great!
All plants are natural, nothing artificial.
Have you seen this video? I hope you will like it: ruclips.net/video/XX44Obkaqv0/видео.html
Perfect, thank you.
Most welcome 🤗
Hi there , when is needed to clean the filter what is the best way tonmake it with that setup?
Ps. Awesome video!
Hello there,
You can clean it every 2 months, depending on the bio load. If it’s a planted tank with less fish, you may go up to 3-4 months.
Make sure to clean the filter with the aquarium water itself, in order to retain the beneficial bacteria. If you wash it with direct tap water, you may kill most of the beneficial bacteria, and it will take 3-4 weeks for the bacteria to establish.
This is a great setup video. Thanks!
You are welcome brother 🙌🏻
I am glad you liked it 😇
I am wondering.. will this 250 canister still gives good flow if I added CO2 reactor? The tank is 40x40x40.
Thanks
It should be ok for a tank of that size
Thank you..
Anytime brother 🙌🏻
Hi guy, nice video ! I'm french, sorry for my language.
I have two questions for you. Does this external pump make noise? I have an 80L aquarium, I hesitate between the Eheim Classic 150 pump and the Eheim Classic 250 pump (the one you present in your video). Which one do you recommend and why ?
Thank you
Does not emit any sound, the noise that you hear in my video when I turn the filter on: is the impeller startup at first, that's it, its pretty silent thereafter.
Classic 150 is sufficient for an 80L tank depending on the stocking and hardscape structures that do not block the flow and create dead spots.
@@RifshyRnS Thx
Sir, should i use the double tab connector for flow rate control Actually i have purchased eheim 350 classic for my 40x30x30 cm tank but the flow rate is too high for this dimension. please confirm should i half close the lever of outflow side to control the flow.
350 is way too over-rated for that tank, better to buy a 150.
Cutting down 50% flow is not a good idea
Kasa clean karta ho planted tank, make a vedio on it
Sure will do, stay tuned.
Thanks ✌🏻
Is the flow alright for a 60 cm tank? And will the Classic 350 be too much for a ADA 60p?
350 is too much for a 60p
@@RifshyRnS Thanks a lot for clarifying
Thanks for answer. 250 is is then.
Do you have to prime by sucking on the hose?
Yes
Hello can I use in 2.5 ft tank this canister 250...
This filter is under rated for a 2.5 ft tank, use classic 350
Do you have to fill the cannister with water before priming?
No, it should be empty.
@@RifshyRnS oke thank you
Is it sturdy given that it has threaded intake ??
Indeed it is strong.
@@RifshyRnS You are still using this filter ? Have to faced any leakage issues ??
@@rahulroshan3990 Yes, I am still using it without any problem.
Is it possible to control the flow from the inlet? I bought the filter but not set up yet. Worried it might be too much flow for my 60cm tank
Classic 250’s flow is just right for a 60cm tank.
Yes you can control the flow.
@@RifshyRnS No, you can't control the flow. the double tap connectors are not designed to reduce flow. if you try to reduce flow by closing the valves by a quarter or half, the double tap connectors will leak. Best to keep at 100% open, 100% flow.
Where can I purchase the tubes and valves
It’s a package, comes with the filter. Alternatively, you can find online or check with your local dealer.
whats the function of those 2 grey valves
To turn the flow off for filter maintenance.
shaaaaaaaaaaaaa wow excellent dear
Thanks machan
very nice video
Thanks mate
Does it come with the filter medium?
Yes
I need your help deeply please, i bought used 250 filter but without o ring , can you please give me the details for the o ring size thickness diameter etc .
Orginal o ring 12$ so i need to search for cheaper alternative o ring.
Sorry mate, I don’t have that information.
I highly suggest you buy the original o ring.
had no clue it had to be sphinon... thought mine came broken! lol
does it make a loud sound ?
No, that sound is when you start up at the first time. Thereafter it is quiet.
How long do you prime it for ?
Until the canister is fully filled.
@@RifshyRnS water is also going the wrong way. When I syphoned the water only a little came out, not much. What am I doing wrong ?
@@derekrussell7946 Empty the canister and do it again, make sure both the values are open.
my eheim 150 makes a sound "o o o o", if i lightly touch the lid of the filter, it decreases, do you know why, please guide me how to fix this problem, thanks
I guess there might be some air trapped inside, shake the canister while its on.
Is Eheim 250 to big for 30cm*30cm*30cm tank?
It is way too big.
Eheim Liberty 75 would be perfect for a 30cm cube tank.
How much you bought from aqua art ?
485
@@RifshyRnS there is warranty?
@@akscreation8699 2 years
It would have been helpful if you had mentioned he cost of the filter as well.
USD 132 - is the price here in Qatar 🇶🇦
Your tank size ?
Hamara tank size 20in x12in x12in
Eheim 150/ 250 best hoga hamara tank ke liya plz help me
My tank size is: 60 cm x 30 cm x 35 cm
Eheim 150 would be sufficient for your tank
@@RifshyRnS my tank size 50cm x 30cm x 30cm
150 is ok 👌🏻
Thanks.
Wait did he just unplugged the canister and it still continued to work? 🤯🤯🤯
I plugged it in, not unplugged 😃
I'm trying to prime mine and it won't work. It's filled canister just over half full but won't fill it anymore and I keep getting mouthfulls of tank water 🤮
Empty the canister first and try again
@@RifshyRnS I took the risk and plugged it in when it was half full. Was ok and seems to be working alright so far
Make sure the canister is fully filled
@@RifshyRnS it wouldn't fill all the way no matter what I did
Empty the canister completely and start over
Would there be any concern to turning off the filter on a daily basis?
(then back on after some hours)
Would it do harm to the motor long term or create some concerns on the media if it just sat around 8-12 hours with no flow?
I'm considering turning off the filter overnight that's why (let's leave out why I would do that lol)
Why would you turn off the filter?
Flow is essential for the beneficial bacteria in the filter media to thrive and do the job. Moreover, the circulation within the tank water column is important too.
Hello, beautiful tank. So is this how you prime?. Canister is empty, you suck on outlet hose, which creates a vacuum. Canister fills up. So you wait till water runs out of outlet pipe before switch it on?
Yes
SIR, frm where I can buy?
Sevens Shores or AquaArt
@@RifshyRnS can I have the links ??
@@rahulmitra88
g.page/7shores-aquatic-pet-store?share
g.page/aqua-art-wakrah?share
Good
Nic video brother 🙏🇮🇳
Thanks mate 🙌🏻
u say remove the inlet hose, but thats the outlet hose
You are right, my bad, it's been addressed by many in the comments.
Thanks.
Cost of filter
USD 133
Kautzer Street
Kaylie Locks
great video because the paper instructions are in German!
Thanks Patty, I'm glad my video helped.
👍👍👍👍👍😍👈
N Manx. A😅😊
Test
Do not follow step by step like I did. I’m dyslexic so I struggle with my left and rights but telling people the wrong inlet and outlet is absolute joke you deserved to get banned from RUclips