Repairing a Leaking Seam on an Inflatable SUP Paddleboard
HTML-код
- Опубликовано: 9 сен 2024
- This is 2nd of 2 videos, showing my attempt to repair a leaking seam. The first video was a failed attempt, but this video was a success. See how I did it, and maybe it can help you out if needed.
0:00:05 Tools & materials for the seam repair.
0:01:14 Removing the old glue / cement and cleaning the seam
0:02:58 Applying the vinyl glue / cement
0:04:15 Sealing and Clamping the SUP Seam
0:05:26 Inflating the SUP with air
0:08:15 Applying a dish soap / water solution to the seam to check for leaks
Used to repair a seam leak on my sea eagle kayak. Worked great. Many thanks!
Cool and informative vid. Hope it's still holding up.
Thank you for this video, really helpful
"Sorry for blocked Ng the view" 🤣
One job mate. You had one job.
I have a hypalon sup/boat I've tried this on. I've tried twice now and it keeps leaking. Although the seam is more closed than before, it still hasn't sealed completely.
For anyone wondering, I think it's best to apply some glue and let it get tackyfor 10-20 minutes apply more, then clamp together. I'm gonna try a 3rd time before throwing it away or taking it to a shop.
Doesn't hypon require specialist glue?
Is your repair still holding? Have other seams opened up? Just wondering how wise it is to repair seams on a board where the glue may have broken down. Many thanks.
Thanks for uploading ours”popped” in the sun today after inflation..... devo..... is your repair still good? I’m going to attempt this tomorrow!
Any luck?
My red paddle ride popped in the sun today. Will be tring this soon
@@petejenkins1499 If the seam of your Red has popped in the sun like mine doesn't it mean the glue has broken down causing more seams to open up?
What type of cement do you use?
And what kind of glue?
Thanks
I can’t find actual mek in stores or online, can the “mek substitute” work for this project specifically?
Can probably just use acetone ?
Working with MEK in a closed garage with no respirator? Not a good idea. Maybe you were wearing a respirator, but you seem to make no mention of it, I didn't see one in the video. From Honeywell's web site:
A disposable mask cannot be used with MEK.
It must be a full facepiece reusable respirator with organic vapor chemical cartridges up to 3000 PPM.
Anything over 3000 ppm work site concentration would be supplied air only.
A filter will only protect against particulates in the air, it has no chemical protection whatsoever.
Is it still working? my paddle board seam let go so off to home depot to give it a try thanks for the vid
Yes, it's still working. As a bit of insurance, I've been avoiding leaving my board out in the direct sun, when it's out of the water, and also making sure I don't inflate above the SUP's rated psi pressure. I hope you got yours working too?
ResurrectionEyes No dice on the supplies at Home Depot will try Amazon, thanks again
Nice video. What kind of pump do you use?
Looks like a Sevylor pump to me.
Mahre Time is correct. It's a Sevylor 12 Volt 15PSI / 1 BAR / 100 KPA pump.
1
3:47 Hey, move your arm out of the way! I can't see what you're doing!
Its pretty easy to tell what hes doing. Maybe ask with more respect regarding free content and u might get an answer.
You can’t tell what he’s doing with the qtips ?
A lot of fluff… shortening vids would be key. Not into watching paint dry.