Nyenterinnya (bikin center) yg lama kalo ngebubut tuh, belum lagi mata pahatnya mesti disesuaikan, kalo nggak ada, harus bikin dulu, ngegerinda nya lama lagi, namanya juga benda super keras... Intinya pekerjaan lathe machine work itu adalah teknik inovasi (karena harus selalu bikin "special tool"), kesabaran, konsentrasi & telaten (teliti/akurasi)...😁👍🙏
Creative work my friend 👍🏻 I will say however. Using abrasive discs like that on a lathe will cause abrasive dust to end up all over ur lathe ways. And it can really wear down your ways and carriage and is also real tough to clean up just a tip to anyone watching
Very nice ur toolpost bolt making vedeo. 👍👍 lathe attachment ver good. 👍 drill milling also use product making time. That profit is very fast product finish
Centering the work with only a bent wire- that is the stuff of legend, you are truly a master, we in the West use expensive gauges and really don't get results that are much better- I salute you!☺
i also want to have a dial indicator as a measuring tool.. i am now collecting money to buy.. i'm sorry my language is bad, because all day i only use java and indonesian
@@Yantoo You "speak" the universal language of showing the world some master craftsmanship as seen in your videos. You can do so much with so little, and do it so well that it is inspiringly good enough for all to understand, and so thank you for sharing.☺
Ola bom dia meu Amigo , você é muito criativo um genio , parabens cada vez que vejo um novo video seu te adimiro ainda mais !! 🖒🖒🖒🖒👏👏👏👏Goiânia Goiás Brasil
19.42 - I've got water in my plastic bottle. I'd have ground the square on with a bench grinder as a final operation ( as it was a one-off ) I often have to hold a square in a lathe, since I don't have a four jaw readily available, I use a " temporary collet " - just chuck a piece of bar in a scroll chuck ( with number 1 jaw marked on it ), drill and bore until the square is a snug fit, then take it out, put a slit in it, stick it back in the chuck, and the slit will allow it to grip the square - a great way to hold a square in a three jaw, and it'll take an interrupted cut no problem. If I was going to use abrasives on the spindle housing, I'd have taken the bearings out.
Minute 3:49 - a wondering method for cutting on the lathe ... not just going deeper and deeper, but making a bit more space for the cutter moving it a bit in longitudinal direction ! I have never seen it before ! ( being an hobbist, i have to learn from professional users ... ) Alessandro from Rome - Italy
Wow you are very good. When something wrong u have quickly new compensation, like when was broken thread tool. But clocks and hammer its amazing😂. Very nice work with ideas! Thanks
Sebaiknya as jangan di potong pakai belender , yang baik gunakan gergaji mesin hasilnya material dibubut gak ngerusak pahat bubut intan.. ngedrad sebaiknya pahat putih bohler mo asli , dan putara jangan terlalu kencang .
I love the creativeness. Cant help but cringe when I see the chuck spinning with rods and wrenches just mm from it 😬. I like the resourcefulness and workarounds though. Stay safe.
@@dagaric2 Да это ещё что)) В следующем видосе он варит прямо в патроне, хотя штангенциркуль у мужика Mitutoyo-вский. Ну это вот то, про что я всё время говорю: очень важна школа, культура обработки, которые передаются только через преемственность поколений, что называется "из рук в руки". Что у нас, в подавляющем большинстве случаев, варварски разрушено. Мужик может и талантливый и смекалистый, но творит адскую дичь, понятно, что от бедности , но и из-за отсутствия "культуры" тоже.
@@ГеоргийМиронов-п5б И как ты при таком способе сможешь оставить буртик для ключа?Тут он все правильно сделал.Только все по-колхозному.Коряво и тяп-ляп.Поэтому вся техника и инструмент вокруг раздолбанные ,как и работник.
Nyenterinnya (bikin center) yg lama kalo ngebubut tuh, belum lagi mata pahatnya mesti disesuaikan, kalo nggak ada, harus bikin dulu, ngegerinda nya lama lagi, namanya juga benda super keras...
Intinya pekerjaan lathe machine work itu adalah teknik inovasi (karena harus selalu bikin "special tool"), kesabaran, konsentrasi & telaten (teliti/akurasi)...😁👍🙏
I love the dial gauge !!!
We really have become a throw away society in the west !!!
Brilliant
Yeah we have and it's sad it's why I have a large from the 20s and make almost everything I need for it myself on it
Hi
My dear friend, I really enjoy watching your videos and I learn many interesting points from you. I hope you are always successful.
aku salut sama hasil karya panjenengan .... ide ide terbaru selalu ada, dan sukses selalu mas......
Trik-triknya boleh juga tuh, mantap!
Hanya komentar anda yang saya paham😂😂
Creative work my friend 👍🏻 I will say however. Using abrasive discs like that on a lathe will cause abrasive dust to end up all over ur lathe ways. And it can really wear down your ways and carriage and is also real tough to clean up just a tip to anyone watching
Kerja bagus pak. Perawatan pada mesin bubut perlu diperhatikan. Tetap aman.
Very nice ur toolpost bolt making vedeo. 👍👍 lathe attachment ver good. 👍 drill milling also use product making time. That profit is very fast product finish
All videos iam watching so super . Your highly skilled person . God bless you
Thanks sir .
Indexing is the best part Of Video 👌👍 Brilliant Keep it Up
Thank sir
Thats what made me click mate, index is neat and cheap, and above all homegamer prove
Centering the work with only a bent wire- that is the stuff of legend, you are truly a master, we in the West use expensive gauges and really don't get results that are much better- I salute you!☺
i also want to have a dial indicator as a measuring tool.. i am now collecting money to buy.. i'm sorry my language is bad, because all day i only use java and indonesian
@@Yantoo You "speak" the universal language of showing the world some master craftsmanship as seen in your videos. You can do so much with so little, and do it so well that it is inspiringly good enough for all to understand, and so thank you for sharing.☺
Indexing with a piece of drill press and a sprocket fixed in the lathe compound using a sanding disc. Absolutely brilliant!!!
@@Yantoo go buy a mhc 0-1 .001 increment dial indicator 20 usd and does a great job
@@BeachsideHank я аж прослезился ...
Ola bom dia meu Amigo , você é muito criativo um genio , parabens cada vez que vejo um novo video seu te adimiro ainda mais !! 🖒🖒🖒🖒👏👏👏👏Goiânia Goiás Brasil
19.42 - I've got water in my plastic bottle. I'd have ground the square on with a bench grinder as a final operation ( as it was a one-off )
I often have to hold a square in a lathe, since I don't have a four jaw readily available, I use a " temporary collet " - just chuck a piece of bar in a scroll chuck ( with number 1 jaw marked on it ), drill and bore until the square is a snug fit, then take it out, put a slit in it, stick it back in the chuck, and the slit will allow it to grip the square - a great way to hold a square in a three jaw, and it'll take an interrupted cut no problem.
If I was going to use abrasives on the spindle housing, I'd have taken the bearings out.
You do some nice work. Thank you for sharing.
Excelente ideia, parabéns e obrigado por compartilhar! Like +Insc.
Exelent work my friend 😊👍
mantapp , sukses slalu sehu
Aamiin mas..dari kota mana ini mas e?
@@Yantoo Sumedang mas
mesin surface murah" loh om. mau order gak aku ada nih. 😊tpi untuk keseluruhan omnya hebat. ada aja ide nya ❤❤
I like that you used the pliers correctly as a hammer
Very good video , u have some good lathe skills very good job. Thanks
Penontonnya Internasional gan, salut sama kreativitasnya
Kreatif skil dewa 👍
Minute 3:49 - a wondering method for cutting on the lathe ... not just going deeper and deeper, but making a bit more space for the cutter moving it a bit in longitudinal direction !
I have never seen it before ! ( being an hobbist, i have to learn from professional users ... )
Alessandro from Rome - Italy
This is terrifyingly awesome! lol. Way to get it done!! 👏👏👏
You are an perfect artist in metalwork!
I liked how you figured out how to use what you had to make what you needed. Good job. 👍
Голь на выдумки хитра. Вы мастер, снимаю шляпу!! 👍
Excellent job, 👍👍👍
Good work but I cringed watching the abrasive dust going all over the lathe 😳
Trabalho de Mestre my Friend 🇧🇷👏
I love that indexer you made that's off the chain brother
Thanks sir
Świetna robota I bardzo jest Świetna zrobiona ta robota pozdrawiam twócę tego filmiku 👍👍👍👍
Suhu tenan iki.🤙
Gday, brilliant job mate, really enjoyed watching, cheers
Thanks sir
@@Yantoo We thank you. Very skillful.
Mantul bang 👍terima kasih
Nice video❤️💯💯💯
Very good 👍👍👍👍👍👍👍👌
Отличное видео. Если надо будет убить станок и кучу времени, обязательно займусь!)
using a sprocket as an indexer is genius, Amazing
Beautiful job 👏👏
Usta bu kalemler miladi oldu
Excellent work.
Kreatif .......👍
Itu rpm gerinda kurang cepat .
Bom pra caramba!!! Vc tá de parabéns com os seus trabalhos!!!
⁰1
¹q1
Wow you are very good. When something wrong u have quickly new compensation, like when was broken thread tool. But clocks and hammer its amazing😂. Very nice work with ideas! Thanks
Perfect work 👍
Not my definition of "perfect".
Sebaiknya as jangan di potong pakai belender , yang baik gunakan gergaji mesin hasilnya material dibubut gak ngerusak pahat bubut intan.. ngedrad sebaiknya pahat putih bohler mo asli , dan putara jangan terlalu kencang .
Good workmanship
Thanks sir
Bravo master!
Use diveder head for bolt squre cutting time. Faster finish product 👍
Waaaaaaah...baguuuuuusssssass....siiiiip
Nice work
Hot Diggity, My Man....👽🤙
I love the creativeness. Cant help but cringe when I see the chuck spinning with rods and wrenches just mm from it 😬. I like the resourcefulness and workarounds though. Stay safe.
Keren mas masyaAllah
mantap braddd👍👍😊😁🙏
Saya tidak menyangka... Anda tidak memilik air gun compressor..
Good idea
Good work
But lathe machine ka R p m kam padega my opinion
Excelente tu trabajo la morza quedaria muy bien sujeta a una mesa de metal
Very good technique+++
Nice job done well
Anjirr jadi pengen pake mesin bubut, udah 6th gak pegang mesin bubut, dulu stiap hari kerja pake msin bubut
Mesin sejuta kegunaan mesin bubut itu..
Wow sing komen wong bule akeh hahah....o iyo kok jarang oplud mas
Nek garapan rame ora sempet ngrekam mas.. 😁
Nice video, thanks :)
Thanks for watching brother ♥️
Mas,tutor dong mas buat derat persegi 4 dan derat petrisium,cara baca derat dan tabel nya,masik kelas 10 mas mohon bimbingannya😁🙏
Sudah ada di video saya pak
Parabéns serviço muito bem feito provou que cabeça foi feita pra pensar 👏👏👏👏
What happened to the original bolt? And didn't you make another bolt a few month ago?
Nice video!
The threads crush/flatten after a giveb time. They just won't hold on tigth anymore.
Dus gewoon hardstikke dol.
@@pinocolada4254 thanks! Ook voor de humor 😄
Good idia😃😃😃😃😃
Интересный способ Спасибо за видео
super mantap!!!! ❤
Very clever. Well done.
Thanks sir
@@Yantoo сколько тебе лет сударь?
Is the cutting wheel faster than a fly cutter?
Делительная головка просто супер в конце видно как ровно срезано))) не проще было грани проточить в кулачках)))!
Love the creativity
kısıtlı imkanlarla neleri başarıyorsun kardeş bravo 🇹🇷❣
Teşekkür ederim efendim, Endonezya'dan sıcak selamlar
@@Yantoo вам в индонезии не нужен станочник многофункционал)))????
Образив от отрезного диска даже в токарном цехе не должен присутствовать!
По патрону нельзя бить железякой!
Эээх! Горе специалисты !
very good
Kayaknya lebih mudah, dan lebih cepat di gerinda tangan langsung deh
Bisa jadi pak.. Ini sbnrnya cara untuk di aplikasikan ke segi enam, segi delapan dan seterusnya..dan untuk buat mata bor rotary broaching juga
@@Yantoo jgn lupa mas safety nya, ajarilah yg anak anak2 sejak awal, safety itu yg utama
thank you very much, I am going to make one.
Excellent work
Good job
Инструмент возле патрона держать нельзя! Можно травмировать себя и окружающих.
И болты эти из «какого-то» болта нельзя делать😊
А то что чувак установил абразивный круг от болгарки и направляйки не накрыл?! Хотя они там нормальной такой горой мусора укрыты...
@@van.den.budenmayer да, видео вызывают боль
@@dagaric2 Да это ещё что)) В следующем видосе он варит прямо в патроне, хотя штангенциркуль у мужика Mitutoyo-вский. Ну это вот то, про что я всё время говорю: очень важна школа, культура обработки, которые передаются только через преемственность поколений, что называется "из рук в руки". Что у нас, в подавляющем большинстве случаев, варварски разрушено. Мужик может и талантливый и смекалистый, но творит адскую дичь, понятно, что от бедности , но и из-за отсутствия "культуры" тоже.
Muito bom, parabéns!
It's interesting, which tools you take for your work. 👍
👍👍👍👍👍👍Good.
Muốn tiện luloon xe gai phải tìm tố một loại thép mới đạt tiêu chuẩn vì đồ ghế phải chuẩn và chất...
Образивом на станке ну не знаю. Замени на дисковую фрезу. Для диска от ушм и оборотов мало.
A shaft from an old grinder is perfect for fixing abrasive wheels in a lathe chuck
Eres un artista muy bonito quedó tu trabajo
Как-то сложно, должен быть способ проще. Ну и хочется сказать: возьми фрезер. Хотя, возможно, на западе они дорогие , ещё дороже, чем у нас
Вообще-то нужно было зажать в патроне и проточить четыре грани. Это не токарь а пекарь !
какой запад?, ...это восток
@@ГеоргийМиронов-п5б И как ты при таком способе сможешь оставить буртик для ключа?Тут он все правильно сделал.Только все по-колхозному.Коряво и тяп-ляп.Поэтому вся техника и инструмент вокруг раздолбанные ,как и работник.
El compressor 😅 good job
😁🤭
Gostei, é bem fácil desta forma .
Pengen ketemu langsong karo mas e hehe
Dolan mriki mas.. Tambah seduluran
Хорошо сделал!)))
Well done sir!
Молоток ушастый, на ходу смышляет.
Nice work but wtf at 7:00 😳Lol buy a new air hose.
5:10 always lubricate the tap with oil.
Ngeri klo pecah cutting whel ny
Ok very good