Takes me back to an '80's TV show. The Fall Guy. Lee Majors played a Hollywood stuntman, with a side job, as a bounty hunter. My old Dodge.... same two tone, miss's something. LOVE those wheels, and tires, though.
yes sir they are i work at an off-road shop and we sell them all the time people love them including me. they aren't the best tire you can buy but they are the best band for your buck and think they look awesome! Thanks for the compliment i have worked hard to build this truck.
Awesome truck! Does the 4inch exhaust make it drone in the cab going down the highway? Last time I had a truck with a 4 inch tailpipe it was obnoxiously loud in the cab, even with a huge muffler! Thanks!
Surprisingly not my truck is really quiet actually for having no mufflers. but it might not drone because it's 3 inch pipe until it gets to the bed of the truck then it is 4 inch the rest of the way. It might drone if it was 4 inch all the way
@@aha3335 you are going to need an oil feed and oil return, you will also need an exhaust manifold and an intake manifold which you can source from 6.5 diesel you can even use the 6.5 turbo probably the oil feed line and the drain on the oil pan or you can try to source an old banks kit but those are rare and expensive
@@aha3335 6.5 are significantly more common than the bank's kits you could even just swap the 6.5 into your Blazer It would bolt up depending upon whether you have air conditioning in the truck you might have to modify your blower motor assembly that has the AC stuff in it
@@compressorhead02 hey that's what year my grandparents truck is expect she's a 1984 custom Deluxe Single cab standard 8"ft bed og toolbox 350 Gas with a I think a 5spd manual but idk but I planned to do a 6.0 Powerstroke compound turbo swapp but idk when
@@jimsmith9819 yea it's completely Stock but the motor from what my grandma told me is that mu uncle and my father completely rebuilt the 350 so idk but I'm planning on doing a engine swap to 6.0 powerstroke compound turbo setup and a 7spd manual
Yeah it's basically the same as a banks manifold but this one is a BAE manifold I got it with my truck when I bought it I couldn't tell you where you can get them
It is a BAE exhaust manifold a late model 6.5 intake manifold and the rest of the stuff i just bought individually, I put/welded together the piping and exhaust from things I had around or bought. The turbo is the WH1C holset off a first gen Cummins the wastegate is set to 12 lbs of boost
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Favorite GM paint scheme!!!! Interesting combo of swaps makes it slick!!
That thing sounds like a semi! Awesome truck!!
I had a '97 K-2500 6.5 with a straight pipe that sounded just like that. Sounded good plowing parking lots.
Truck looks and sounds mean. 👌 it's expensive to do upgrades but the improvements are noticeable. Make more vids as it gets better.
Sweet sounds good and I'm only into my turbo about $300
This is cheap as hell.
Awesome man, if you ever rebuild it I would suggest putting a forged crank in that old girl so you don’t have any problems running some power.
I miss my 86 chevy suburban seeing this truck
Takes me back to an '80's TV show. The Fall Guy. Lee Majors played a Hollywood stuntman, with a side job, as a bounty hunter. My old Dodge.... same two tone, miss's something. LOVE those wheels, and tires, though.
Thank you so much!
@@compressorhead02 are those US mags 101 17x10 wheels?
Beautiful truck!
Thank you!
Oh, wow, I didn't know you were doing all that fabricating! Nice truck
Thank you!
Awesome truck! Looks good and sounds good!
Love the truck!
Love your fall guy truck. Wish she was mine
i didnt even realize i made a kind of copy of the fall guy truck until after i lifted it and modified it
Cool ride man!
thanks!
Nice job
Bad ass man💪🏻
Not bad.
Sounds purty good
Thank you
Are the Cooper STT Pro any good in snowy conditions? Looking for a good Tire i can use year round. Nice Truck btw *.*
yes sir they are i work at an off-road shop and we sell them all the time people love them including me. they aren't the best tire you can buy but they are the best band for your buck and think they look awesome! Thanks for the compliment i have worked hard to build this truck.
Alf, i have four BF Goodrich All Terrain TAs on mine and was driving in a foot of snow in 2WD most of the winter with no problems
Soy de Argentina , excelente la Chevy ,un excelente motor
Nice truck
Thank you!
Awesome truck!
Does the 4inch exhaust make it drone in the cab going down the highway? Last time I had a truck with a 4 inch tailpipe it was obnoxiously loud in the cab, even with a huge muffler!
Thanks!
Surprisingly not my truck is really quiet actually for having no mufflers. but it might not drone because it's 3 inch pipe until it gets to the bed of the truck then it is 4 inch the rest of the way. It might drone if it was 4 inch all the way
Great Truck 🇺🇸
Did you put anything other than the turbo in the engine?
I put a fluiddampr on it replaced the front main seal and timing chain
lol your inner fender trim is just like mine. All bent to shit haha
What part of Washington do you live in? By the way, I love your truck!
I live around summer
And thank you!
Awesome truck!
What did you have to do to convert your 6.2 to a turbo? Like whats everything youd need to add to make it work. Id love to turbo my 82 blazer
@@aha3335 you are going to need an oil feed and oil return, you will also need an exhaust manifold and an intake manifold which you can source from 6.5 diesel you can even use the 6.5 turbo probably the oil feed line and the drain on the oil pan or you can try to source an old banks kit but those are rare and expensive
@@aha3335 6.5 are significantly more common than the bank's kits you could even just swap the 6.5 into your Blazer It would bolt up depending upon whether you have air conditioning in the truck you might have to modify your blower motor assembly that has the AC stuff in it
What year is your truck
1984
@@compressorhead02 hey that's what year my grandparents truck is expect she's a 1984 custom Deluxe Single cab standard 8"ft bed og toolbox 350 Gas with a I think a 5spd manual but idk but I planned to do a 6.0 Powerstroke compound turbo swapp but idk when
@@SilverShadow688 if its stock, its a four speed
@@jimsmith9819 nice
@@jimsmith9819 yea it's completely Stock but the motor from what my grandma told me is that mu uncle and my father completely rebuilt the 350 so idk but I'm planning on doing a engine swap to 6.0 powerstroke compound turbo setup and a 7spd manual
Were could I find that manifold? I’ve been wanting to turbo my 85 without taking the ac out and I looks like you have it in with that manifold
Yeah it's basically the same as a banks manifold but this one is a BAE manifold I got it with my truck when I bought it I couldn't tell you where you can get them
Tire size??
37 - 13.50 - 17s
PANAMA CITY😀😀😀😀😀
What kind of mileage are you getting?
Probably around 17 mpg
What's the towing capacity?
Bout tree fiddy.
What turbo set up is that ?
It is a BAE exhaust manifold a late model 6.5 intake manifold and the rest of the stuff i just bought individually, I put/welded together the piping and exhaust from things I had around or bought. The turbo is the WH1C holset off a first gen Cummins the wastegate is set to 12 lbs of boost
OMG.
What size exhaust housing?
i cant remember its smaller than a hic exhaust housing if that is any help