Glad to see everything stayed together! She took some hits!! With the motor that hot it's no wonder why the pinion came loose. Great bash as always!👍🤙💯
Thanks man yes I’m sure that’s exactly why everything loosened up because of the heat and I heard it happening. I should’ve stopped and checked it but I have issues with that. I get into a rhythm and don’t like stopping. I also had a crack in my rear bulkhead, that I didn’t notice until after, but that could’ve been there for a while. There’s no telling anyway bro thanks for your time. Have a great upcoming weekend happy bashing.🚀💪🤘😎👊
Thank you so much my dear friend. Try not to get blown away in Sweden. Pretty nice weather here in Florida today. Definitely no wind and yes those cows were extremely pissed off. I had fun with them pretty much all day and thanks for your time my friend have a great upcoming weekend.🚀👊👊
Yeah man that would be a super bad mistake on their part they would become hamburger meat real quick. I have something nice and sweet in my pocket that would take them down quick. Don’t leave home without it. I’ll have steaks and hamburger meat for the year.🤣👍
Haha yeah, those damn cows man that shit was hilarious they messed with me all day that day. Appreciate your time my friend. Have a great upcoming weekend.🚀💪🤘😎👊
That’s exactly right those TP motors are almost indestructible. I’ve got six of them and they all still work perfectly fine. I can’t say that about any other brand motors that I have that I’ve been running for over a year. Thanks for your time man and have a great upcoming weekend.
Cattle herding.Good job you weren't running a Trax ass Rustler.That would get ya some jail time.I heard some stories of certain cattle eating the RC cars that we use here in England to herd them.✌️Sweet stunting Aldo.
Thanks Johnny that is definitely a possibility. They would definitely stomp the shit out of them if they got a hold of it. Hope you’re doing well My friend and England is treating you well. Have a great rest of your weekend and watch out for those cows.🤘😎👊👊
Thanks man yeah she does seem to run better with the lid off. It would’ve ran a whole lot better if I were to plug my fans in maybe that’s why the cows were so worked up. They were trying to tell me something was wrong.🤷♂️🤣👍
Ive already had to replace front and rear ring gear and pinon im running 20 mil center 50 thou f and rear ive got a xlx2 to go on it what do u recommend motor and gearing and shock oil? Im running the HRB 9500'S its pretty fast but i think they make the truck heavy only packs ive bought so far. Lol get the nerve to sail it that far one day. I raced for about 10 years, years ago 1/10 scale stadium truck and buggy always ran losi. Thanks dude!
Right on man I’m running 1 million in my front differential 20 million center and 500,000 rear. I’m pretty sure that’s what it is it’s been a while since I’ve built that truck but I’m also running the Vitavon gears in the front and rear as well. I got tired of blowing stock ones on the motor I would keep it light as possible I’m running a TP motor in this truck but try to find something small like a 56 series can would be good 1100 KV I think hobbywing has a 5690 now that would be perfect and try to find some smaller lipos like a 6800 mah would be ideal
@@AldoLoyal Thanks man I've went through several pinon and spurs I did shim the front and rear diff and seamed to help. This video you said 30×25 on pinon and spur? Thanks for responding so quickly I'm fixing to order a few things you got a link for MC2 for motor mount that helps you out? Or any other
I went almost a year without my body popping off and now it's happening all over the damn place. SO ANNOYYING!! I know how you guys felt now for sure 🤣🤣🤣
I was going to say, you should check the screws on the front motor plate. When I saw you hitting the throttle the motor was moving, I guess it was the motor slide screws though? those front motor plate screws on tp motors need to be loctited before you run it. I've had the front plate come off a few times because the screws backed out and I thought my motor was donezo but all it needed was some loctite and a screwdriver. I even have a tp motor that's been to 240f and it still works perfectly fine. I think I have at least 21 tp motors and I've only ever had 1 die on me and it was a motor I crashed into a curb with while it was in a limitless and even then it worked great for months after that. I really love TP motors, I've yet to even have to change a bearing in one tbh.
Did you have it sitting on the shelf for a year? If the body wasn’t popping off that’s crazy. Every session the body comes off. That’s my stripper car.🤣 the motor slide is what Loosened not the end bell I’ve had that happen a few times when they get extremely hot but I’ve never had one of the end bells on the TP come loose yet
Did you have it sitting on the shelf for a year? If the body wasn’t popping off that’s crazy. Every session the body comes off. That’s my stripper car.🤣 the motor slide is what Loosened not the end bell I’ve had that happen a few times when they get extremely hot but I’ve never had one of the end bells on the TP come loose yet
Glad to see everything stayed together! She took some hits!! With the motor that hot it's no wonder why the pinion came loose. Great bash as always!👍🤙💯
Thanks man yes I’m sure that’s exactly why everything loosened up because of the heat and I heard it happening. I should’ve stopped and checked it but I have issues with that. I get into a rhythm and don’t like stopping. I also had a crack in my rear bulkhead, that I didn’t notice until after, but that could’ve been there for a while. There’s no telling anyway bro thanks for your time. Have a great upcoming weekend happy bashing.🚀💪🤘😎👊
And when you have a windy af day, sitting on the tapio...this shows up❤❤, the XRT looked dialed as few, the cows did not 😂😂😂😂
Thank you so much my dear friend. Try not to get blown away in Sweden. Pretty nice weather here in Florida today. Definitely no wind and yes those cows were extremely pissed off. I had fun with them pretty much all day and thanks for your time my friend have a great upcoming weekend.🚀👊👊
Nice run bro as always, them cows r goin to break that fence down and come bash u lol they was getting all excited about the xrt today 😂😂😂
Yeah man that would be a super bad mistake on their part they would become hamburger meat real quick. I have something nice and sweet in my pocket that would take them down quick. Don’t leave home without it. I’ll have steaks and hamburger meat for the year.🤣👍
@@AldoLoyal lol wat u got a 9mm lol
@@BIGALSCRAWLERS just a little bit more punch than that 💪💥👊
500 feet lol nice vid again Aldo :))) thumbs up !!Keep on Bashing.
Awesome bro thanks so much for your time. Much appreciated.
🚀💪🤘😎👊
Nice bashing as usual, but if them cows get that Rc, it's all over
Haha yeah, those damn cows man that shit was hilarious they messed with me all day that day. Appreciate your time my friend. Have a great upcoming weekend.🚀💪🤘😎👊
Killer bash! She had a good run, even without AC, lol. Thanks for punishing the parts!!!
Yeah man I can’t believe I did that. that’s what happens when you get excited. Awesome upgrades as always M2cTough💪
Nice man i swear these tp motors are unbrekabel they Can survive at such High temps no other brand Can do that
That’s exactly right those TP motors are almost indestructible. I’ve got six of them and they all still work perfectly fine. I can’t say that about any other brand motors that I have that I’ve been running for over a year. Thanks for your time man and have a great upcoming weekend.
@@AldoLoyal yea man i have 2 tp motors for now lol they are still running like Champs great week to you too
@@nichlaslomholt66 Thanks
Cattle herding.Good job you weren't running a Trax ass Rustler.That would get ya some jail time.I heard some stories of certain cattle eating the RC cars that we use here in England to herd them.✌️Sweet stunting Aldo.
Thanks Johnny that is definitely a possibility. They would definitely stomp the shit out of them if they got a hold of it. Hope you’re doing well My friend and England is treating you well. Have a great rest of your weekend and watch out for those cows.🤘😎👊👊
Nice Video!!! (but Your colors look too intense) nice bashing
Thanks man appreciate that feedback I’ll see if I can cut it down a little bit on the next one👍😎👊👊
Beast brother, runs better with the lid off😂😂
Them cows😂 bro I'm ☠️
Thanks man yeah she does seem to run better with the lid off. It would’ve ran a whole lot better if I were to plug my fans in maybe that’s why the cows were so worked up. They were trying to tell me something was wrong.🤷♂️🤣👍
Ive already had to replace front and rear ring gear and pinon im running 20 mil center 50 thou f and rear ive got a xlx2 to go on it what do u recommend motor and gearing and shock oil? Im running the HRB 9500'S its pretty fast but i think they make the truck heavy only packs ive bought so far. Lol get the nerve to sail it that far one day. I raced for about 10 years, years ago 1/10 scale stadium truck and buggy always ran losi. Thanks dude!
Right on man I’m running 1 million in my front differential 20 million center and 500,000 rear. I’m pretty sure that’s what it is it’s been a while since I’ve built that truck but I’m also running the Vitavon gears in the front and rear as well. I got tired of blowing stock ones on the motor I would keep it light as possible I’m running a TP motor in this truck but try to find something small like a 56 series can would be good 1100 KV I think hobbywing has a 5690 now that would be perfect and try to find some smaller lipos like a 6800 mah would be ideal
@@AldoLoyal Thanks man I've went through several pinon and spurs I did shim the front and rear diff and seamed to help. This video you said 30×25 on pinon and spur? Thanks for responding so quickly I'm fixing to order a few things you got a link for MC2 for motor mount that helps you out? Or any other
I went almost a year without my body popping off and now it's happening all over the damn place. SO ANNOYYING!! I know how you guys felt now for sure 🤣🤣🤣
I was going to say, you should check the screws on the front motor plate. When I saw you hitting the throttle the motor was moving, I guess it was the motor slide screws though? those front motor plate screws on tp motors need to be loctited before you run it. I've had the front plate come off a few times because the screws backed out and I thought my motor was donezo but all it needed was some loctite and a screwdriver. I even have a tp motor that's been to 240f and it still works perfectly fine. I think I have at least 21 tp motors and I've only ever had 1 die on me and it was a motor I crashed into a curb with while it was in a limitless and even then it worked great for months after that. I really love TP motors, I've yet to even have to change a bearing in one tbh.
Did you have it sitting on the shelf for a year? If the body wasn’t popping off that’s crazy. Every session the body comes off. That’s my stripper car.🤣 the motor slide is what Loosened not the end bell I’ve had that happen a few times when they get extremely hot but I’ve never had one of the end bells on the TP come loose yet
Did you have it sitting on the shelf for a year? If the body wasn’t popping off that’s crazy. Every session the body comes off. That’s my stripper car.🤣 the motor slide is what Loosened not the end bell I’ve had that happen a few times when they get extremely hot but I’ve never had one of the end bells on the TP come loose yet