How to replace the headlight assembly/bulbs on a 2004 Toyota Camry

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • Here are some of the tools that jimthecarguy uses
    www.amazon.com...
    I will show you how to replace the headlight assembly/ bulb on a 2002 to 2012 Toyota Camry.The job is not as hard as you might think.
    Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.

Комментарии • 65

  • @davids6533
    @davids6533 5 лет назад +10

    ..and 4 years later, I find myself looking for help and this video is exactly what I needed for my 04 Camry. Thank You Jim!

    • @jimthecarguy
      @jimthecarguy  5 лет назад +3

      I'm happy to help. Thank you for watching

  • @DS-su7vj
    @DS-su7vj 2 года назад +3

    This video made changing out both headlight assemblies SO EASY! Saved a LOT of time versus other videos too (you do not have to remove all of the undercarriage coverings which saved a lot of time). The whole process took less than an hour - during the middle of winter. Thank you!

  • @theosus1
    @theosus1 3 года назад +1

    perfect! i never would have gotten to the side bolt without this. my old camry is looking spiffy now, and i can see in the dark again.

  • @Shinji0Ikari007
    @Shinji0Ikari007 2 года назад

    Thank you! Wife hit a deer and broke the assembly, and bent some of the bumper. Do not know how much a shop would have cost me, but all it took was buying the assembly, and an hour of my time. Thank you so much!

  • @Steven-jc5oe
    @Steven-jc5oe 27 дней назад

    This was the most helpful video - it was quite EZ following his directions. ! Highly recommend this video!

  • @jimgracey3822
    @jimgracey3822 2 года назад +1

    Thanks for this! Would not have tackled it without this. Was a task but came out pretty nice.

  • @harrytaylor9589
    @harrytaylor9589 4 года назад +1

    I wouldn't dream of doing anything like this. What a great video, I had more trouble setting the new light bulb in place than I did removing the entire assembly. Thanks so very much.

  • @dannymarrero4226
    @dannymarrero4226 Год назад

    You actually gave me hope again to upgrade my headlight assembly. I definitely didn’t want to remove the entire bumper cover but the way you did looks WAY easier. Thank you for sharing this.

    • @jimthecarguy
      @jimthecarguy  Год назад

      Glad I could help.Just remember not to touch the glass part of the bulb.

  • @larrygaribay1117
    @larrygaribay1117 2 года назад

    Thanks for a great video. By far the easiest installation compared to other videos. One suggestion would have been to show where the current headlights were aiming in order to compare and adjust after the installation.

  • @TheJorgSacul
    @TheJorgSacul 4 года назад

    This is fantastic-- I have to replace one of the housings on my daughter's car, some parking lot idiot in a SUV crunched her headlight. RockAuto, here I come!

  • @ado-yz9rb
    @ado-yz9rb Год назад

    Great video all the others have you tearing the bottom tray and the bumper off Thanks !!!!

  • @VP-ei8dc
    @VP-ei8dc 4 года назад

    your actually the professor well done on all repairs

  • @Sarah-rd1qy
    @Sarah-rd1qy 5 лет назад +1

    Thanks for a great video. I bought headlamps from RocAuto and installed them today after watching your instructions. It took me less than an hour and it really was just as easy as you said.

  • @jeffreypinkerton287
    @jeffreypinkerton287 6 лет назад +1

    Jim - Thanks for the great video! Just installed two new headlights this morning!

  • @souljamob1tv
    @souljamob1tv 4 года назад +1

    Greatly appreciate this video. Simple and to the point. Thank you so much👍

  • @user-pg6jl7jw7s
    @user-pg6jl7jw7s 11 месяцев назад

    You make that look so easy!

  • @anglstndngbi
    @anglstndngbi 3 года назад

    Thank you for your video! Took me only an hour start to finish!

  • @lorimiller623
    @lorimiller623 5 лет назад +1

    If your clips break (mine did), the replacements for the wheel well are Toyota splash retainer 455400; the center pin is Toyota push type retainer 465530.

    • @jimthecarguy
      @jimthecarguy  5 лет назад

      Thanks for the input and for watching.

  • @gregaguy
    @gregaguy 8 лет назад

    Great video. Mine was slightly different, with two screws on the top of the headlight and the one on the side, which was a bit more difficult to get to, but got it done alright. Thanks!

    • @jimthecarguy
      @jimthecarguy  8 лет назад

      I hope I was helpful.Thanks for stopping by the shop.

  • @FiddlinBill1
    @FiddlinBill1 3 года назад

    Fantastic instructions WELL DONE... THANK YOU

  • @hadespaganism2405
    @hadespaganism2405 2 года назад

    Thanks for the info 👍

  • @TravelswithCthulhu
    @TravelswithCthulhu 3 года назад

    This is awesome. Everything was exactly as you showed. Thank you!

  • @djbattlc9906
    @djbattlc9906 5 лет назад

    You are a great teacher! Thank you!!

    • @jimthecarguy
      @jimthecarguy  5 лет назад

      I'm happy to help. Thanks for watching

  • @chrisjoyce6889
    @chrisjoyce6889 Год назад

    Where do you buy your headlights from specifically? Nice job!

  • @robertovillarreal9640
    @robertovillarreal9640 6 лет назад +4

    one tiny suggestion, I would check that the lights work before I put everything back together. Just in case...

  • @PeterHernandez-lg2eh
    @PeterHernandez-lg2eh Год назад

    Going to do same on 1998 Honda prelude

  • @garyoconnordbaairrepair7775
    @garyoconnordbaairrepair7775 4 года назад

    After hooking the bulbs. I would have tried the lights each before tightening everything else together. I will do this for each.

  • @davidtraficante759
    @davidtraficante759 4 года назад

    Hello Jim , Thank you so much for doing the video , Where did you buy the knock off headlight assembly ,I need to purchase them also .

  • @PeterHernandez-lg2eh
    @PeterHernandez-lg2eh Год назад

    What brand of headlight assembly? Oem, depo, 1a auto, etc

  • @Kielyn123
    @Kielyn123 4 года назад

    Always the best!

  • @davethornton6646
    @davethornton6646 2 года назад

    Awesome thanks

  • @mariaaguiar2237
    @mariaaguiar2237 4 года назад

    great video, nice and detailed

  • @1lostperson
    @1lostperson 8 лет назад +1

    thank you

  • @suunto61
    @suunto61 5 месяцев назад

    And 9 years later....

  • @Iknowyoumadnow
    @Iknowyoumadnow 2 года назад

    It's Moe from the 3 stooges

  • @trini_boi2414
    @trini_boi2414 4 года назад

    Next time snap off the bumper from both sides when changing both light to relieve pressure making it easier to get to that bolt on the bottom corner of the headlight assembly..

  • @matthewseskin4080
    @matthewseskin4080 5 лет назад

    Hi Jim. I have an 04 Lexus es330, similar body, and compared to a video of an 02 es330, I think its the same setup as the camry. Do I need a 6 point or 12 point 10 mm socket? Thanks for the video.

    • @jimthecarguy
      @jimthecarguy  5 лет назад

      I recommend the 6 point socket. Thanks for watching

  • @georgeheri895
    @georgeheri895 9 лет назад

    Jim, are those Toyota lights or knock off's. Not that it matters just curious. Good vid. Thanks

    • @jimthecarguy
      @jimthecarguy  9 лет назад +2

      Hi George ,Ya there the knock off.The dealer lights were to much. The owner almost had a heart attack when he found out how much the dealer light were.LOL

  • @dcutl
    @dcutl 8 лет назад

    I feel like I know how to change the lenses now. Previously, I tried the headlight restoration kit and the lights were good for two years, but now they are bad again.

    • @jimthecarguy
      @jimthecarguy  8 лет назад

      Thank you for watching and your input.

    • @dcutl
      @dcutl 8 лет назад +1

      I changed the lenses in less than 30 minutes using aftermarket lenses at a cost of approximately $100. Your video saved me a ton of time and money.

  • @jamescarver1324
    @jamescarver1324 2 года назад +1

    Lighting and audio is absolutely terrible

  • @jacksagrafsky4936
    @jacksagrafsky4936 6 лет назад

    Next time you do a video try your sound better.

    • @phantomshtter
      @phantomshtter 4 года назад

      You need closed captioning, you're deaf.

  • @Ron-h4l
    @Ron-h4l 9 лет назад

    JIM email you didn't here back check your email thanks.

    • @jimthecarguy
      @jimthecarguy  9 лет назад

      Hi john1240able ,Sorry did you send me an e mail?

    • @Ron-h4l
      @Ron-h4l 9 лет назад

      Yes, I did two times JIM take look thanks.

    • @jimthecarguy
      @jimthecarguy  9 лет назад

      Can you send the e mail again I can't find it