Happy Sunday...Happy you are here! Please remember to engage with our video so we can find more Full Custom Ian fans! LIKE, COMMENT and Make Sure you are SUBSCRIBED! We will have some new content again this week! And more updates on all things Full Custom! Have a great day! ~ The Roussels
Yahoo, you made my day!!!!sitting in a hospital room with my wife, sleeping on a couch, watching you and spacing out, you're definitely the highlight of my day, thank you guy's, peace ✌ out
Split the top tube then bring the filler thru the tube, flush with the top of the tube. Use one of the flush fit motorcycle fuel tank filler caps. Great show, very entertaining and thought provoking!
Ian, your fabricating and wealth of thought and creativity are second to none!!!!! Your skills and your talents are SIMPLY AMAZING!!!!! Many, many thanks Bud for being YOU, keeping it real and helping others. What an inspiration you truly are Ian!!!!!!!!!!!!!! Keep up the good work! Respectfully, Sandy
Thank you for letting me know about the sheet metal NOT staying flat if you use the shears, I have a project coming up big help. Please keep your little tips going😊
really appreciate you guys coming in on these hot summer days to entertain us folks shows your love for your followers BIG THANKS great job both of you
I'm never bored. I watched it closely. Fascinating process and useful tips. I was surprised when the "SUBSCRIBE" sign popped up, and I thought "Oh-no! The video is almost done!" Looking forward to your next installment.
It is great to see your workshop with projects in it. The eps we are seeing here in Australia at the moment, the series with the boat street rod for victor, shows the workshop with just one project and it makes it look sterile. More projects in the background keeps it interesting. Love the work you do Ian and my son and I gain much needed inspiration from you in possible ways to make difficult repairs. God bless youboth. Bryan🙏🏼🇦🇺❤️🔥
Your work remind me when i was younger and helping my dad with his weird idea's, just my 2 cents i d like to see two tubes from the neck down following the gaz tank shape until the 1st break then split side-ways away from the tank so the back of the tank is just hanging above the motor....and in that triangle you now created at the top there s roon for a weird/cool gaz cap that being said you havent disappointed so far... 😂😂 do your magic
Love watching your work man I have few things I been restoring nothing better than taking something that nobody cares about and turn into something awesome! Really wish could fabricate and weld like you do, one my next toys is good welder
I love watching you two. I’m an old f..t and you brighten my day. I’m 71 and I started working on my 1960 Dodge @ 16, because I had to. All the way through to my 72 SS El Camino LT1. Anyway Jamie maybe think about getting another phone so when one cools you can use the other one. Or go for the Go Pro as other You Tubers use. Just saying. Really like the interaction between you two. Reminds me of my wife and I. 😊
Awesome episode! It’s one of my favorite channels, you guys are both getting better at doing the show with every episode. What’s up with Little Jewel? Or the Zephyr? Caddywhacked? Maybe a shop status update episode would be cool?
Little Jewel is on hold. Zephyr is waiting on an engine It’s 1996467 degrees in the desert and no AC at the moment so caddy is slow progress Shop updates soon!
thinking a bigger version of the mocked up tank (the way it is at the start of the vid rather than a slimmed down coffin shape) would make an awesome cab (in case you changed yr mind about the c cab idea). loving the build!
Luv watchin you work! Recently finished a Tote Goat resto-mod from bare metal to finish with 5hp Honda and Trail 90 gas tank! So much fun to fool around with!
Loving your fast loooose approach..... I've designed and built many projects for university research in the same way over the years. it makes for rapid outcomes and fast iteration. and it's all art in my mind
Looking good Ian! As a sheet metal worker I would have suggested that you cross broke each piece and that would also strengthen it but it would give it that more diamond cut look. Just an idea. Love what you do guys!😊
Happy Sunday...Happy you are here! Please remember to engage with our video so we can find more Full Custom Ian fans! LIKE, COMMENT and Make Sure you are SUBSCRIBED! We will have some new content again this week! And more updates on all things Full Custom! Have a great day! ~ The Roussels
Have a great day !!!!
Hey Ian are you going to line the tank to prevent rust? (Extra precaution)
If you sell it when you're done I would love to be able to purchase it for my son
Ian are you going with fiberglass or sheetmetal on the body?
trouble is with center bar etc will look great i agree but once roof goes on you wont be able to look easy gettin out..but its a great build .5 star
Yahoo, you made my day!!!!sitting in a hospital room with my wife, sleeping on a couch, watching you and spacing out, you're definitely the highlight of my day, thank you guy's, peace ✌ out
Split the top tube then bring the filler thru the tube, flush with the top of the tube. Use one of the flush fit motorcycle fuel tank filler caps.
Great show, very entertaining and thought provoking!
Good idea!
Dude I am so invested in this project it’s so cool never stop dreaming it keeps us young
Ian, your fabricating and wealth of thought and creativity are second to none!!!!! Your skills and your talents are SIMPLY AMAZING!!!!! Many, many thanks Bud for being YOU, keeping it real and helping others. What an inspiration you truly are Ian!!!!!!!!!!!!!! Keep up the good work!
Respectfully,
Sandy
Wow, thank you!
Great filming Jamie! Killer work Ian! George The GlassMan 👽👽👽👽👽👽👽
Thank you George!
Thank you for letting me know about the sheet metal NOT staying flat if you use the shears, I have a project coming up big help. Please keep your little tips going😊
The methodology presented in that tank sheet layout is very efficient and thorough
Good diamond 💎 shape tank and the trike build coming little by little
really appreciate you guys coming in on these hot summer days to entertain us folks shows your love for your followers BIG THANKS great job both of you
Very nice sheet metal work. 👍
Thank you! Cheers!
I'm never bored. I watched it closely. Fascinating process and useful tips. I was surprised when the "SUBSCRIBE" sign popped up, and I thought "Oh-no! The video is almost done!" Looking forward to your next installment.
It is great to see your workshop with projects in it. The eps we are seeing here in Australia at the moment, the series with the boat street rod for victor, shows the workshop with just one project and it makes it look sterile. More projects in the background keeps it interesting. Love the work you do Ian and my son and I gain much needed inspiration from you in possible ways to make difficult repairs. God bless youboth. Bryan🙏🏼🇦🇺❤️🔥
Love the process of Ian's fabricating
Yes - still exciting. Waiting for next vid.
More to come!
Loving it, looking forward to seeing the finished result 👍
Wish yall were 1hour show. Love watching yall
Once it cools down… 😎
@@fullcustomIanit’s way to hot in the dessert to work that long on a show
And not may trees to hide under.
Thanks for the update and sharing with us today.
Looking good as always thanks for sharing can't wait till the next one ✌👽👍🍻
Thanks 👍
Great watch, made my morning
un réservoir d'essence comme celui la, ça se fait en deux pièces de tôle 😉
That is a pre-like for sure, how could I not like seen Ian doing his magic step by step!!!
That's so cool looking nice job and stay safe out there
Simplify absolutely love how you work caveman status keep on keepin on🎉🎉🎉
Always!
Thanks for sharing 😀👍
Dont care what u build , love the fabrication and imagination. Top shelf
Can u please build the zephyr that would be an awsome build to finish !!!!!!
www.eastwood.com/eastwood-contour-sct.html
Mayjah skills 🤙🏾
Love the custom coffin gas tank fabrication.
I like how the fuel tank is looking , nice job 👌
Thanks for a great time today !!!
Our pleasure!
Love you guys! ❤🎉
We love you!
@fullcustomIan Our favorite channel 🫶 please, please, please 🙏 keep on doing what you do 🙌 ❤️
Interesting and very creative. I’m always impressed with the work that both of you do !!!
Ian I will say it again You are a true artist....Much Love and Prayers from Joe in NY
Your work remind me when i was younger and helping my dad with his weird idea's,
just my 2 cents i d like to see two tubes from the neck down following the gaz tank shape until the 1st break then split side-ways away from the tank so the back of the tank is just hanging above the motor....and in that triangle you now created at the top there s roon for a weird/cool gaz cap that being said you havent disappointed so far... 😂😂 do your magic
Looks like you have a plan and you’re working da plan
Epic! Super inspiring! Mini bikes are ultra cool! Yours is way beyond !!!!!!
Thank you for sharing🛸👽👍
You are so welcome 🙏
Thank you for the video
I like it ... I like it a lot 👍
Thank you! Cheers!
Hi guys. Always a great Sunday with the Roussel’s, when they are fabricating and “enhancing “ projects! Thanks 😎😎👍
Another great video 🎉🎉🎉
Thank you!
Rounded tank because we need more hammer and English wheel. 😂
Yiur videos are so enjoyable and you are amazing so is your videographer.
Haaaa...goin too be way coool...haaaa..lovin it
I always enjoy your posts!
Love watching your work man I have few things I been restoring nothing better than taking something that nobody cares about and turn into something awesome! Really wish could fabricate and weld like you do, one my next toys is good welder
Happy for you on the move. But I will miss the desert shop. Love your work and jealous of all the toys. You gotta lot to move move
Cool indeed! Love it! Good stuff!
Always awesome to watch your process in making rolling art!
Don't forget about the cup holder for that frosty...👈😮
😂😂😂
Loving the content as always. Ian is a true artist
Like this build
We all need more!
Always happy when i see a new video out.
Love your channel! Thank you for doing it!
Glad you enjoy it!
What a cool mini trike!
Love those heart windows on the wall
Watched this couple days ago on another device but I thought you should get another thumbs up!
You might need to wear a box if you get any closer to that frame when riding 🤣🤣
Loving this build......reminds me of my mini bike that I had.
Great project Ian…
Thank you
Very nice work Ian and Jamie
Ian does holy work just look at his gloves , lol
Looking good 👍👍
For sure I agree I can watch all day but 1 hour episodes would be way better
Not at all what I thought you were going to do making a coffin tank but I see the path you used was the quickest way through it.
Tanks looking good, thanks for sharing, all the best to yous and your loved ones
I love watching you two. I’m an old f..t and you brighten my day. I’m 71 and I started working on my 1960 Dodge @ 16, because I had to. All the way through to my 72 SS El Camino LT1. Anyway Jamie maybe think about getting another phone so when one cools you can use the other one. Or go for the Go Pro as other You Tubers use. Just saying. Really like the interaction between you two. Reminds me of my wife and I. 😊
Thank you 🙏
Excellent work!
I am loving that !!
Awesome episode! It’s one of my favorite channels, you guys are both getting better at doing the show with every episode. What’s up with Little Jewel? Or the Zephyr? Caddywhacked? Maybe a shop status update episode would be cool?
Little Jewel is on hold.
Zephyr is waiting on an engine
It’s 1996467 degrees in the desert and no AC at the moment so caddy is slow progress
Shop updates soon!
Need to add a VW gas tank cap, to get your VW part in this build. 😝 Looking good 👍🏼
thinking a bigger version of the mocked up tank (the way it is at the start of the vid rather than a slimmed down coffin shape) would make an awesome cab (in case you changed yr mind about the c cab idea). loving the build!
Great work🙌
Thank you so much 😀
Excellent guys cheers 🥂 😊
Can’t wait to see this sumbeech finished. 🤙 badass dude
Spred them out in the center 😊
Awesome
Here we go…
Ian’s starting his sheet-y comments again🤠
Keep em comin
🤣
Love thus build
Luv watchin you work! Recently finished a Tote Goat resto-mod from bare metal to finish with 5hp Honda and Trail 90 gas tank! So much fun to fool around with!
That tank would look real nice with TiG welded seems.
Love your channel , hate trikes, waiting for you to finish the Jeep.
Tank came out tight! 👌
😉✌
Your vlogs make my day 😊
Nice work !
Loving your fast loooose approach..... I've designed and built many projects for university research in the same way over the years. it makes for rapid outcomes and fast iteration. and it's all art in my mind
Yes! Yes YES!!! Wow Ian what a gr8 little scooter this will be. xlent love it .Cheers
Looking good guys
Free hand functional sculpture and entertainment what else does one need. Kinda like Bob Ross with a welder😊
I’m so digging it, this is super cool dude!
Great work
I love the way you improvise!
Awesome episode.....!
Always subscribed. Always like most. Always comment. Looking good🎉❤
Yay! Thank you!
Looking good Ian! As a sheet metal worker I would have suggested that you cross broke each piece and that would also strengthen it but it would give it that more diamond cut look. Just an idea. Love what you do guys!😊
It's coming together and looking good.
Tank looks great. One tube across the top will look spot on.
Any time we get is appreciated now, especially with the fact that you’re moving into a new home. Best wishes