Ford Escort MK2 - Building an RC: Tamiya MF-01X
HTML-код
- Опубликовано: 19 июл 2021
- This is a time lapse build of a custom Tamiya Ford Escort MK2 (MF-01x #58687 chassis). At the end of the video I show the complete results. I never thought of getting this chassis (MF-01x) because I was unsure if I would like the chassis design, the rally setup, and components. But when Tamiya released this particular kit, I was very interested because of the Escort MK2 body. When I was a kid we had a neighbor who had an MK2 RS1800. It was white, low, had minilite wheels, and motor modifications. Whenever it would drive by the neighborhood, I could hear the loud NA engine and I would run out to take a look.
My initial plan was to build it as intended-the rally version and box art. But as I saw completed builds from others, I felt that the kit itself didn’t do the actual rally car justice. Sometimes, it looked goofy or very toy-like. I was also unsure if I wanted a rally car setup. So the kit was stored for months before I decided what to do with it-eventually, I decided on-road with drift wheels and tires. I don’t think I’ve seen anyone post something like it yet so I thought it would interesting.
The 4WD MF-01x, I think, is an underrated chassis. It can be set to two different ride heights (low and high) and three different wheelbase lengths: S (210mm), M (225mm) or L (239mm). Another interesting characteristic is that this chassis has a playful rear end. I noticed on some run videos the rear has less traction. Probably has to do with a few things but two that stand out are how far the motor sticks out in the rear, and the dampers’ position. On the front, the dampers lay down closer to the center chassis which helps steering. On rear, it’s more upright-giving it less traction but increases damping. Then you have the sealed front and rear gearboxes which helps when running in dirt and dusty surfaces. I think it’s a versatile chassis for those who don’t have the budget to buy many kits as it can be adjusted for various setups.
Of course, this kit/chassis is more for bashing and just general “Tamiya” fun. There are some downsides and those that stick out for me: almost all the chassis parts are hard plastics that uses self-tapping screws-might be an issue with rebuilds; transmission/gearbox is quite loud; comes with plastic bushings; the dampers are friction style (no oil) so if you don’t replace it, it’s quite bouncy and drives more like a toy; body is pre-painted white (the color isn’t a problem for me as I actually wanted white) but the quality of the paint job is not what I would do if I painted it myself. Some areas had just enough paint and so it’s not the white finish I’m used to. Then the windows are smoke painted and I typically prefer a darker smoke finish-this one looks light and murky. There are other minor things but I think most who would buy this chassis are aware of the limitations. Some of these issues are irrelevant on my build because I upgraded some of the parts.
As for the theme, I wanted it to look simple in a classic way. Not overdo things and just focus on the stance if possible. One of the challenges I had were the wheels. I didn’t want to use the smaller M chassis wheels. I wanted larger diameter ones-somewhat like what Ken Block’s team did with his Hoonigan Escort. I was also limited by wheel offset. I believe the Turbomacs are 6mm and RS Watanabe are 9mm-and pairing that with a shorter and narrow M chassis Escort body is an issue. To help solve it, I used fender flares for a different car, so I had to do some trimming and figuring things out. I also had to trim a lot off of the wheel arches to accommodate those flares and full turn steering on the front wheels. As part of the fun, I added a sound simulator with something close to an Escort 2.0 NA engine.
Performance-wise, I upgrade the following: oil-filled dampers with hard springs and adjustable pistons so I can set different damping for the rears and fronts, replaced the Torque Tuned motor with a GT Tuned, Tamiya ball bearings, aluminum knuckles and hub carriers from Square Japan, and so on. Kept it to a minimum. Aside from Turbomac wheels, generic BBS style wheels, I also used RS Watanabe drift wheels with Yokomo Drift Competition DRA tires. Made a difference and made it so much fun to drive. On the short run video, the surface isn’t entirely smooth, it’s very abrasive and has little bumps but the dampers made it drive smooth and tires made it glide. In the end, I think this chassis and setup ended up being a hoot to drive.
Additional Parts:
Tamiya GT Tuned motor
Tamiya TBLE-02S ESC
Tamiya Hi Torque servo saver
KO Propo KR-212FHG gyro receiver
MKS 1210 Servo
Tamiya MF01X ball bearing set
Stainless hex screws
Magnetic body mounts
Square Japan aluminum hub carriers, knuckle arms, servo saver
Square Japan aluminum washers, ball ends
HPI Turbomac Wheels
HPI tires
Speedworks Japan RS Watanabe Wheels
Yokomo Drift Competition DRA tires
BBS Style wheels
Integy Tires
Lunsford Titanium Turnbuckles
YR Qutus dampers
![FORD Escort MK2 - Best of | historic rally , drifts & hillclimb - Rally - pure sound [HD]](http://i.ytimg.com/vi/yH671DM2grg/mqdefault.jpg)
I must say that your build vids are probably the best on youtube. The filming, the music, the professionalism, it's all there. Watching you work is like meditation. Keep it up!
Thanks, Kamal! I really appreciate the kind comment and feedback. Will do. Take care!
I'm glad that they've come out with a couple of different new tire patterns for their rally cars like I did also on the Citron.
The engine sound simulator makes this thing absolutely next level! Beautiful build.
Yes, it does! Actually, it makes it fun to drive too
Gorgeous build as always, really loving the wheel wells/fenders!
Thanks, Bee Sod! Glad you like it. Thank you for the words and watching!
Again an awesome build, love the wide body kit on it, really gives it the retro feel.
And while watching the build, great soundtrack as per usual.
Keep it up!
Thanks, Lucas Geniar! I appreciate the comment and support. And thank you for watching!
You dont know how I enjoy your videos man, just magic
Thanks, I appreciate it :)
A lot of fantastic details here. I especially liked the Millington decal 😃
Thanks, Stuart Leckie! You’re the first to notice the Millington decal :)!
Mate... That's bloody AWESOMENESS.!!!! 👍 👍 👍
Wow! MyDad had an Eskort, so definitely nostalgic for me too. Tamiya magic and quirks make it special. Looking forward to the next one. Cheers, from South Africa!
I always wonder who the 13 thumbs downs are with amazing content like this....
Thanks, Shannon Hendrickse! The real cars are wonderful. I appreciate it and thank you for watching. Hope all is well in South Africa!
Thanks, again. Haha, I wonder too but it's all good. Thanks for the support.
One of the craziest cars to ever hit the rally courses.
I agree! Thanks for watching.
Fantastic build , so meticulous in your assembly and the aesthetics are great . I've ordered the escort body set and an M08R chassis for some RWD fun . Thanks for the inspiration.
Thanks, Paul! I appreciate the feedback. The M08R chassis is a great one! I think that would complement the Escort body very well.
Bloody great looking alternative to the mighty Escort.
Thanks, ian8354! And thank you for watching.
Thank you for continuing to make your amazing content... I truly enjoy your builds, skills and presentation.
Thanks, katous! I appreciate the nice words and comment! Thank you for watching.
Love the custom Ford Escort build. Got to learn quite a number of tips on this one. Didn't know you need to add some oil at certain screw holes.
Thanks, graham aker! The oil is optional. I used it on this build because I switched out the kit tapping screws with stainless machine hex screws and it just makes it easier to drive in when they're stubborn. Ideally, cutting oil works best.
Another awesome build! Always look forward to see what you will build next!
Thanks, Everett Smith! I appreciate the words and support. Thank you for watching.
ate my heart out seeing this! awesome! i had 2 real life of this, one 1976 and one 1978. niccceeeee man!
Thanks, Paul! Must've been amazing to have real ones!
Maaaaan!..I would LOVE to get behind the wheels of those!.. Jammy b@$7@7d!..lol..The Mexico's or RS2000's are My Grail Cars.. Absolutely adore them.. Or maybe a Escort RS Turbo Mk1.. I'd give My Right Nut for one of those tbh
Hey! The aesthetics of this build is top notch. The shocks look really good and I think using the softer springs is the way to go. I like how your builds are inspired by different memories from your past. I really like these small boxy rwd sports cars from the 70s… Datsun 510s, BMW 2002s, the Escort MK2. The white body with wider black wheels looks hot. Like the slammed look and the flares. So many little details and touches set this RC apart. Makes me want a real one to buzz around with on the weekends 😀 Take care👍🏾
Thanks again! Love those old and '70s RWD compact cars and still like compact cars. You should check out Daniel Wu's 510 aka "Tanto" here on YT and also his Honda S800. The 510 would be a cool project but probably hard to find parts. Take care, bro and love the boat videos!
Yeah Bro, saw both those vids, Wu has great taste in cars. I found a 225mm 510 lexan body on ebay, I may pick it up. I have a real 2013 BMW 128i that kind of captures that 70s compact aesthetic. One of these days I plan to do something cool with it. Maybe wait a few more years when less of them are still on the road. Thanks for watching the boat vid👍🏾
Is that an e82? Love that chassis series and the 1M coupe model. You probably should stock up on parts/mods while they're not scarce.
Yes, it’s an e82. Automatic tranny (I originally got if for my wife) and naturally aspirated. The e82 shares almost all the suspension and performance parts with the 328i so I should be able to do some simple tweaks, widen the stance a bit. Maybe some more aggressive springs/shocks, exhaust and intake. 1M Coupe is an incredible car.
NA and all motor would be sweet. Love that kind of setup. If only I knew how the 1M c would end I would've probably dropped some $$$ on it back in the day. I did have an e46 330ci a long time ago but it just had so many problems and it kept me up all night working on it haha. But loved how it drove.
now I am tempted to send this guy a Sakura D5 Chassis
Another Stella job AHM 👍🏻, I wasn’t to fussed this kit to start with but I am now.
Thanks, Justfor Fun! Same here and it was just sitting around in the box. But I think I wouldn't have enjoyed it as much if not for the drift tires and on-road setup.
Wow,yet again an amazing build ,thank you for sharing ,I wish I had your for sight in seeing what is possible then creating you planned vision , again thank you 👍
Thank you, Mike! I appreciate the nice comment and words! And thanks for watching.
An other great build!
The Tamiya M chassis are great fun, to build and drive. It is possible to do really nice cars with these.
Thanks, Nuno Gaspar! Definitely on the M chassis, fun cars they are.
Love your builds, you have all the tools 😀👍🏻 and mad skillz
Thanks, Michael! I appreciate it. Missed out on a few kits so I could get the tools :D
Hey, thanks for taking the time to record, edit and upload these vids. Nice quality and format. Love the music choice too. Reminds me of some of the music Terry Barentsen uses in his crazy cycling videos. Keep up the great work!
Thanks, Ben Rosich! I really appreciate the comment and thoughtfulness. It definitely takes some time and effort to put these videos out. Your comment is very encouraging and I'll try to keep it up. Thanks for watching!
Glad i found your channel, im stoked by alle disciplines of the video process. Tastefull art!
Thanks, Tobias Herzog! Thanks for the nice words and watching!
love it, so mesmerizing watching it come together!
Thanks, Kosmonaut! Thank you for the nice words and watching!
cant stop watching your builds now they are so well done , its like some one said in comments - Mesmerizing thanks for sharing your beautiful builds with the world my friend 10/10 top Job :-)
Thanks, Andrew Magro! I appreciate the words and thank you for watching!
Sick!..I thought You edited in the sound effects!..not a sound generator!..nuts!..I'm in Awe..Yet again!.. If You ever decide You have too many cars..I'll be more than happy to help out! lol..that AP spoiler too!?..wow!..just...wow😮😍
Thanks! I like how the sound simulator makes it fun to drive :)
Wow! your builds are absolutely amazing, and you got everything so neat and tidy while buliding a true inspiration :)
Thanks! I appreciate the comment and thank you for watching.
Very nice. I almost owned a Mk2 1600 Sport, but it wound start when I went to look at it, so I passed! This looks wicked. 😎👍🏻
Thanks, Rob! I would maybe pass up if I were in your shoes too even if it's a sweet car.
Lovely build, well done 👍
Thanks! And thank you for watching.
Gobsmacked! Truly awesome.
Thanks, Gaz R! And thank you for watching.
Wow what a masterpiece and beauty that was awesome
Thanks, osbaldo iturrino! And thank you for watching.
Juste magnifique ! Envoûtant ! 🤯
Merci! Et merci d'avoir regardé.
Amazing skills!
Thanks, Alex Alexandre! And thank you for watching.
Love your videos- awesome work
Thanks, Darren Woodhead! And thank you for watching.
Bro your just awesome👍👍👍
You are the best perfectionist I have ever seen in my life...
Thanks, Ayushnandan Sharma! I appreciate it and thank you for watching.
@@MechanicAfterHours your welcome 🙂
Your builds are just amazing to watch! I hope you do a workshop tour. Would love to grab some tips for my ameture builds!!
Thanks, Ugur Kaymak! And thank you for watching. Perhaps one day I can do something to show tools and all.
good taste on display here
Thanks, k k! I appreciate it and thanks for watching.
love ford.. amazing car mk2 cobra love this channel
Thanks, RUI MANUEL! And thank you for watching.
Amazing! Again.
Thanks, Daan Rutten! And thank you for watching.
Epic build 👍
Thanks, CW-01 Creations! And thank you for watching.
@@MechanicAfterHours You're Most Welcome 😎
looks badass!
Thanks, Rooster RC!
Nice work on the wheel fender wells. RWB style :).
Thanks, Roger! And thank you for watching.
Haven't seen the video and I had given a thumbs up already
Thanks, Adrian Sánchez! I appreciate it and thank you for watching.
Sweet and clean... I "rally" like it
:D Thanks, Edu! And thanks for watching. Hope all is well.
luving it so cool 😎 video buddy!!!
Thanks, DanZig WraiTh! And thank you for watching.
Cool build! But Man, it would look so much better with them covers off them gold Rims.
Thanks, Brian Argo! Totally understand and thanks for the feedback and for watching!
Perfect 👍
Thanks, Chris! And thank you for watching.
Amazing job. This Escort is bestial. 👍👍👍👏👏👏
Thank you!
Tout simplement fabuleux !!! Quel talent !! J adore, bravo, si les modèles était en vente peut-être que je me ferait plaisir et que je vous l'achèterai😍😍😍
Merci Nicolas Milo ! Merci pour les gentils mots et regarder la vidéo!
@@MechanicAfterHours c est normal !!! Your are si talented👍👍👍😛😛i am watching tamiya blitzer beetle, and I enjoy looking at this beauty😍😍merci beaucoup ☺️☺️
Awesome build!
Would love to see you build the Zakspeed Capri.
Thanks, MrCaprinut! The Zakspeed Capri is a beautiful one. Missed out on that one, at least here in the States. One day maybe.
@@MechanicAfterHours They are releasing it again so hope you get it this time :-)
If you want a little more speed out of it, pick up the TL-01 Speed Tune Gear set (53342) it doesn't require any modification to install it
Thanks for the tip, Trowa Jakuard! And thank you for watching.
It's a pure joy watching you build these kits! What type of power tool do you use? I have a lot of kits to build and i'm fed up with the tamiya screw drivers 😅
Thanks, Marcus Haas! The drivers are Muchmore racing electric driver and Skil electric driver. You'll need bits to go with them. Good luck!
Really nice job ! I'm a RC car enthusiast and whoo you have really cool tools. Could you describe what tools do you use ? For the oil on screws, be careful to avoid any plastic damages. Generally I use a CHC screw dedicated to create the thread. Then I remove it and put the definitive screw. Amazing model !
Thanks, Ludo! And thank you for watching. I agree with you on the screws. I actually use a thread trapping screw on my other builds. I just slacked here because there's so many screw on this particular chassis and thought I'd use this for general bashing and testing.
Don't forget that chassis is an m chassis for four-wheel drive that shaft is thick like a tl01 shaft.
Like amico 😉👍
Thank you, GianniF1 Giovanni Rizzo!
Hi... just bought this kit myself and was wondering what the flares were from so I could source some to build a hoonigan style replica (much like yours)... excellent attention to detail dude... love your work
Thanks for watching! Someone told me they were Rocket Bunny fender flares. I've seen them on 240zs. Try to search Rocket Bunny. It needs a little work to get it to fit as they're normally not for Escorts. Good luck!
I bought the Body and I am putting it on am M-08 Concept
Thanks for watching! Good luck and the M08 is a nice piece of kit ;)
Any chance you could explain the tool you use to drive the turnbuckle tool with your driver, seems like a great time saver!
There is something about your channel I really love (probably how you keep the box art essence of the cars while adding a personal touch). Any plans of posting more regular videos? what are the next projects?
Thanks, David Voisin! I appreciate the nice words and comments. That's definitely one my wishes, to be able to find more time to regularly do builds/videos. Mostly, what takes time is a combination of parts taking a while to arrive (or backordered) and just work outside of the hobby. As for the next ones, it's a running list. From a few TRFs, F1s, crawlers, vintage re-re buggies, current buggies, some discontinued on-road cars, restorations, and so on. The next video should be up sooner than later and it's a kit most don't buy or want, quite unexpected. Then it's a crawler.
I wonder what's the purpose for dropping damper oil before screwing?🤔
really beautiful drifting escort btw!👏👏👏
Thanks, Seth800! And thank you for watching. I had to use some oil because I replaced the kit provided self tapping screws with stainless hex machine screws. Makes it easier to go in. Got a bit lazy on this one because I ran out of cutting oil and typically I clear out the plastic debris.
Very cool build just one thing and it's Tamiya not you! Something off with the rear side windows don't think there long enough. Where I live in the UK there are still a lot of these driving around unless the rally one was shortened slightly like the Audi Quattro was! But hey pretty car for sure! 😁👍
Thanks! That's interesting about the rear windows. It's very rare to find an Mk2 where I live but I wonder if it's because of the bigger rear wheels and fender flares I used, makes the rear windows look smaller?
@@MechanicAfterHours could be, could also be camera angle and device I'm watching on as its very unusual for Tamiya to mess up the proportions!
Hi. I hope you do not mind me asking where you got the wider wheel arches please. Sweet looking piece
I have a 2door mk2 escort with rally arches,any chance you could find out what those fender flares are from.would love to build this in real life
Wow!!!!
Thanks!
@@MechanicAfterHours 👍 actually we had a 1978 Ford Escort Mk2 here in the Philippines, I miss that car very much, that's the car that take me back home from the hospital, when my mom gave birth to me, unfortunately, it was sold almost 30 years ago, later found out that it was turned into a rally car by the new owner, whom happens to be competing in local rally car competition, it was hardly recognizable, since most of the interiors were stripped down to have way for 2 recaro seats and a roll cage...I miss that car
Great Video! How did you like that sound module?
Cool build!
Those flat connectors you use for the motor, at 22:48, what kind are those and where did you get them? I never thought of these as a nice alternative to bullet connectors for motors with flat connector sets.
Hi Lars and thanks for watching! They are "spade connectors" I've had for a while for something else and just thought I'd use them for the builds-just so happens it worked out.
Impressive like always :)
Can you please tell me what type of light do you use on your working desk ?
Thank you!
Thanks, Small Scale Fun. I just have work lights or garage lights, the fluorescent one. Nothing too special, I guess.
@@MechanicAfterHours ok, thank you!
great work!!!👍 where did you get the window rubber trim from ?
Thanks, Justin Thorsson! And thank you for watching. I just made the rubber trim myself using matte vinyl and a vinyl router.
What device are you using to test the servo? Huge fan of your channel and aesthetic. You are extremely talented and your builds are works of art!
Thank you, Omar Rizwan! I appreciate the support and nice words. The servo tester is a Spektrum XBC100 Smart battery checker and servo driver.
Possibly a Renault turbo 5 from tamiya in the future? :D great vid
Thanks, Poke! I do like the Renault. Missed out on that one but I think they might be releasing it again.
Great video! I would like to know about your tools. I found the cordless screwdriver, where did you get the bits from? You need a 2.0mm blade for M3 screws. And where did you get the tool for the turnbuckle ball ends from? Greets Andy
Thanks, Andy! And thank you for watching. Some of the bits I just have from other drivers, the short ones are generic bits from Amazon. As for the turnbuckle (assuming you are asking about the driver/electric), it's a Schanffer's Racing turnbuckle driver. Re: M3 screws, I did slack on this one, typically I use a thread tapper like on my other builds.
@@MechanicAfterHours many thanks, i have now all information for the tools.
Hi there - do you have a link for square Japan?? Tried good old google but the amount of results are crazy!!
Loving this build too, your attention to detail is unreal
Hi Paul, here it is rc-square.com
How did you cover the precut holes? I dont think i saw it,outstanding build though
Hi vicFiBi and thanks for watching. I cut tiny pieces of white gloss vinyl and covered it up.
Hi there, what are the electric drivers you are using to assemble the chassis?
Where did you get the fender mount rear view mirror ?
Awesome build! Do you have a link to the magnetic body mounts?
Thanks! I don't, unfortunately. But I think they are just generic cheap ones from Amazon.
@@MechanicAfterHours Much appreciated. Looking forward to seeing more of your videos. Good stuff!
how do you draw the lines to highlight the doors?
I would have put tacky grease in their diffs to give it some limited slip action.
This is a long video how long an actual speed did it take to build this chassis?
Good job!!!! what is the electric screwdriver and servo tester yo used? Thx. Regards.
Hey David! Thanks for watching. The red driver is a generic one that is a clone of the black Muchmore Racing electric driver I primarily use. The red is just ok in comparison and I got it from a local hardware shop. The black Muchmore Racing bought it online. Servo tester is a Spektrum XBC100. It can also check batteries I believe.
Did you get any brandname or website for your hex screws ? Can't find something pretty reliable for now.
For what type of purpose you used Molykote ?
Thanks for your content its pretty smooth and relaxing. Keep it up ?!
Pierre, thanks for watching. Not sure where you are but I get my screws from McMaster-Carr (US). They have 18-8/304 and 316 in stainless. And zinc coated alloy (double the tensile strength of stainless). Some sizes in Titanium. All in round headed screws. Socket screws even have military spec/aviation screws. They also have vibration resistant ones.
As for the Molykote 111, I primarily use it on o-rings, gaskets, rubber damper caps, the insides of the damper caps and potential areas where oil might leak out. Also use it to hold thin washers on various surfaces-especially difficult areas to keep washers in place while inserting screws or metal ball ends, etc. It also prevents o-rings and rubbers from seizing onto other surfaces. It’s not conductive, safer to handle, great water resistance, and so far harmless on plastics and various surfaces. Haven’t had a damper leak.
@@MechanicAfterHours Im from EU, thanks for your complete answer.
There is so mutch screws available, thats great. But Im a bit scared, I do not know witch one too choose first.
Metric 316 and metric 18-8 seems the good starting point ? Then pick directly from a Tamiya intruction book one by one ?
Love the build. What electric drivers are you using out of interest?
Thanks for watching. They are Muchmore Racing and Skil
This wide body looks like 240Z Rocket bunny.
Thanks, Milosz Bagnowski! I looked it up, I think you're right.
They should make m chassis that are six wheel drive and eight-wheel drive.
Nice build!
Do you have a link to the red electric screwdriver @3:26?
Thanks, JayC! The red one is a generic one I got from the local hardware store but you should be able to find one on Amazon. But the black one is a better one and it's a Muchmore Racing electric driver.
@@MechanicAfterHours thanks for the reply do you have a link for the black one? Thanks
Marc, what is the small, white jar of lubricant you're using for some of the assembly procedures, if I may ask?
Edit - I think you answered my question about 10 seconds later in the video. :)
Sorry for the late response! Glad you found the answer, but just in case I believe you're referring to the Molykote 111.
What is the name of that tool that you used to spin the turnbuckles I would like to have that for my electric screwdriver.
Thanks for watching, Brad. There are a few of them, a Tamiya and AE turnbuckle tool and a Schaffner racing one.
Cool build man! What lights did you use for the headlights?
Thanks! They were just regular/generic 5mm LED lights.
what is the tool you used at 4:45 ? Love these builds!
Thanks for watching! It’s a Schaffner Racing ball cup driver
@@MechanicAfterHours Awesome, Thank you!
Can you tell me what brand or provide a link to your electric driver? Specifically the more compact one, not the skill / larger one. Also, how did you use that to turn the ball cups / ends onto the turnbuckles?
Hi Adam Shaver. The drive is a Muchmore Racing driver. I use a Team Associated ball cup wrench.
Wowwwww what greases did you use to the different parts? Thank you
Thanks, Rafael Gonzalez! I wasn't able to keep note of everything but some I recall: molykote 111, lithium grease, cera grease, Tamiya and TLR damper oil, molybdenum grease
@@MechanicAfterHours thank you very much 🤗
Can I recommend a Car(s)?.. a Lancia Delta HF Intergrale, or a Ford Escort RS Turbo Mark 1..similar age cars..both stunnaz!..I don't know about Kits being available though, But I'd LOVE to see what You could Produce!..
Obviously if it cant be done.. There's no problem.. I just have a soft spot for them badboys!
Thanks for watching! Hmm, maybe one day (not soon though), a Lancia would be good, I prefer that one ;)
@@MechanicAfterHours My Friend used to have the red Lancia HF.. Mann what a Car!.. Used to scare the living daylights out of me in that!😲.. I prefer the "Retro" Monsters tbh.. Things like the Old Opel GTE's and The old school Cosworths.. I had a older Alfa for a while that had a flat 4 1.5 boxer engine in it.. 1.5 Sprint I think it was.. Wrote it off though unfortunately..lol.. Oopsie.. Anyways.. You do a hell of a job on these..stunning work mate! Real Class!.. Glad I found Your Channel tbh!..😁
I have always wondered, why does tamiya use such hard plastics? is it proprietary? is it durable? I love tamiya cars, but have always wondered this.
I think it also has to do with Tamiya's background. They're primarily a plastic/static model and toy company and it must be for cost efficiency-and they probably already have the equipment to produce the plastics and mold. When their RC kits gets to race grade (or some of the higher end kits) then they do use carbon fiber or frp. But for enthusiast grade to even some hobby grade they seem to use plastic, and this makes it cheaper for consumers when they buy spare parts.
I've seen people take this body and put it on an mo8 chassis because it's technically was a rear-wheel drive car.
Mine will be going on a shortned TL01 chassis converted to rwd. Have fitted M03 suspension.
Can you share the screw driver tools you use ?
They are muchmore racing drivers
Where do you get this kits?
Thanks! I just ordered it from an online hobby store in the US (Amain Hobbies). Depends where you are in the world and you might want to check your country's RC shops online. But I customized this a little bit. The base model is Tamiya Ford Escort Mk.II Rally (MF-01X) model no. 58687
Can the Tamiya RZ motor run on TBLE-02s without any problem? I mean can you try that?
I'm not sure it can but I haven't tried-don't have a spare RZ for this car. The limit on the TBLE-02s is 25T brushed motor-which I am using on this build a GT Tuned 25T (18-19k rpm @500 torque). The ESC's heatsink gets quite hot but hasn't cut off yet. I would assume the RZ 23T (26-27.5k rpm @500 torque) you can run for just a little bit before the ESC's overheat protection kicks in or it just burns out, or it might not run at all. Probably the best alternative is to use the TBLE-02s' brushless setup for a faster motor.
Hmm.How about the TZ or BZ motor?The brushless motor is just too expensive for me.
I believe the TZ and BZ are slightly close to the RZ with maybe 500 rpm less and a slightly different power curve. Might be an issue too. Only way to know is try. I can probably try to test one but it will be at no load (no car and weight) so it won’t be accurate and not real world where environmental temp and driving affects the esc. On the Tamiya site it notes Sport Tuned motors and if that is the actual Sport Tuned motor, that is a 23T but it only has 18-19k RPM @350 torque. The only other motor I can think of is the Tamiya UGT which is a 24T instead of 23T. About 19400 rpm @500 torque. All these numbers are at no load.
@@MechanicAfterHours maybe I should change the Esc to use RZ motor
I think that might be the cheapest way to use the RZ motor. I believe a Hobbywing Quicrun 1060 is the cheapest you can get that's decent.
looks nice but the sound simulator is not so nice.
magnifique music playlist ??????? svp :)