I've had those features in my HDSGen3 all this time and didn't know it !? 😱...THANKS for covering that custom shading of depth ! I always thought the NOAA chart shading didn't make sense to me !
Thank you for the great info. I just recently purchased a HDs 9 live 3-in-1 and have it all hooked up in my boat. I am running it as a stand alone unit I don't have it hooked up to any network. I was told if you run a 3-in-1 transducer only you should have it plugged into Channel 2 on the back of the unit. When I do that my down scan and side scan work fine but the 2D does not work there is nothing showing on the screen except for the depths on the side. It is not reading the bottom at all. Any help would be grateful thank you.
Absolutely. Your units were designed for fresh water. You will want to leave it set to general if your fishing lakes. Shallow widens the cone and will not give you the defined image of fish and a much less accurate reading of the bottom composition.
Better info than Lowrance Customer Service.. I have issues with my 3-in-1 transducer on my HDS Live 12.. No reading on plane. Comes & goes when not moving. Transducer is parallel with boat bottom. Any ideas?
I've been under the impression from asking and searches the Lowrance units can't (don't) have that feature for lake level. I haven't figured it out anyway. From responses I've received, 'lake level' adjustment (i.e. winter drawdown) is proprietary to Humminbird only. Which doesn't make any sense to me at all as to why other fishfinder company couldn't simply add that to their charting.
I run a Ti2 at my helm. It has the 2 and 1 active imaging transducer. Could I set my down and side scan at 100 feet and just leave my frequency at 800 like you were saying and still keep that good detail image and not miss anything? Or does that only work for the newer models? Thanks
Hey Gino. I got a new boat about 6 months ago that came with two HDS 12 units and Active Target. Been really struggling getting the units dialed in. Starting to wonder if they were installed correctly. Something isn’t clicking for me and ready for some serious help. I live in Clermont.
Have a question. So I have an hds live 9 and as well I want to upgrade my 3 n 1 active imaging transducer to a hds pro transducer. So technically your saying I need to buy a box? To connect everything. Which box would that be exactly?
I want to find a mast which fell from a sailboat (aluminum at a depth of +- 20M. Is this a good device for that purpose or are there better or cheaper options.
If your unit doesn't have e it, you can either buy a card or download free community maps from your phone to your unit. You would need a sd card for that option.
good info mate,im new to these sounder, picked up a lowrance hds carbon 12 from a mate, very nice one questioning the sonar, you don't recommend med or high chirp over the 200hz?? im in salt water,Australia, thanks for the good info
On DownScan and SideScan, why does Navico/Lowrance (all brands?) waste all that screen real estate displaying the big black "dead zone" of the center of your boat, the keel, etc...why not stitch together the actual port-starboard screens and maybe just a black line down the middle ? That displayed dead zone should be minimizable. 🤔
Excellent video. Thank you. I have two HDS Live units and active target. I'm 200% satisfied.
Awsome sir. One of the best lowrance learning videos that I have seen
Great job explaining the live.
Thanks bud this video was so incredibly helpful to me, I just bought HDS 12 and it’s the first one I’ve ever had. Thanks for sharing your knowledge
Thx. Finaly a simple explanation
very helpful, Thanks just a FYI I have a really hard time getting around my Garmin unit
Great info brother!!
Awesome vid gino
Awesome information. Thanks so much!
Great tutorial !!! Thanks
lots of great info here! good job and thank you!
Nice. Any videos you have on settings for active target 1?
ruclips.net/video/bxbWN-XP8oc/видео.htmlsi=UwRh3b5UqnHIw4dE
I've had those features in my HDSGen3 all this time and didn't know it !? 😱...THANKS for covering that custom shading of depth ! I always thought the NOAA chart shading didn't make sense to me !
Thank you for the great info. I just recently purchased a HDs 9 live 3-in-1 and have it all hooked up in my boat. I am running it as a stand alone unit I don't have it hooked up to any network. I was told if you run a 3-in-1 transducer only you should have it plugged into Channel 2 on the back of the unit. When I do that my down scan and side scan work fine but the 2D does not work there is nothing showing on the screen except for the depths on the side. It is not reading the bottom at all. Any help would be grateful thank you.
Really helpful. I have an elite ti2. Question - can you explain the mode settings on the sonar (shallow, general, …)
Absolutely. Your units were designed for fresh water. You will want to leave it set to general if your fishing lakes. Shallow widens the cone and will not give you the defined image of fish and a much less accurate reading of the bottom composition.
Better info than Lowrance Customer Service..
I have issues with my 3-in-1 transducer on my HDS Live 12..
No reading on plane. Comes & goes when not moving. Transducer is parallel with boat bottom. Any ideas?
Is there anyway to do water level correction for winter time draw down lakes? Besides depth shading?
You'd have to record your Silesian and upload it to c maps. They might have it available for free in social maps.
I've been under the impression from asking and searches the Lowrance units can't (don't) have that feature for lake level. I haven't figured it out anyway. From responses I've received, 'lake level' adjustment (i.e. winter drawdown) is proprietary to Humminbird only. Which doesn't make any sense to me at all as to why other fishfinder company couldn't simply add that to their charting.
Thank you for the good video :)
Thanks for watching.
I run a Ti2 at my helm. It has the 2 and 1 active imaging transducer. Could I set my down and side scan at 100 feet and just leave my frequency at 800 like you were saying and still keep that good detail image and not miss anything? Or does that only work for the newer models? Thanks
Hey Gino. I got a new boat about 6 months ago that came with two HDS 12 units and Active Target. Been really struggling getting the units dialed in. Starting to wonder if they were installed correctly. Something isn’t clicking for me and ready for some serious help. I live in Clermont.
Have a question. So I have an hds live 9 and as well I want to upgrade my 3 n 1 active imaging transducer to a hds pro transducer. So technically your saying I need to buy a box? To connect everything. Which box would that be exactly?
The 3100 module
I have 9" hds im not seeing details on side and down scan what should i check first?
I want to find a mast which fell from a sailboat (aluminum at a depth of +- 20M. Is this a good device for that purpose or are there better or cheaper options.
Can you change your track color on mapping ??
Lots to learn 🧐
How do I get my cursor to leave trail in chart mode with navionics?
Shows the triangle, but not leaving my trail
super video !!!!
So does cmap come built into the HDS live? Do I need a map card ?
If your unit doesn't have e it, you can either buy a card or download free community maps from your phone to your unit. You would need a sd card for that option.
good info mate,im new to these sounder, picked up a lowrance hds carbon 12 from a mate, very nice
one questioning the sonar, you don't recommend med or high chirp over the 200hz?? im in salt water,Australia, thanks for the good info
great video does the down and side scan work at 70 80m?
I've never used my units at that depth, I fish natural florida lakes and rivers. I spend the majority of my time in 20 ft or less.
How come on the sonar you used 200khz and not the Chirp choices?
On DownScan and SideScan, why does Navico/Lowrance (all brands?) waste all that screen real estate displaying the big black "dead zone" of the center of your boat, the keel, etc...why not stitch together the actual port-starboard screens and maybe just a black line down the middle ? That displayed dead zone should be minimizable. 🤔
On the sides scan you can take the black area out In the settings
Yeah! real easy