Roughing of large aluminum block (cnc milling)
HTML-код
- Опубликовано: 6 окт 2024
- DONATIONS : Go To ko-fi.com/cncf...
Roughing of large aluminum block (cnc milling)
CNC Production: ruckbs.sk/
Machine: Three-axis machining center brand UDM-2216
CAD/CAM software: Cimatron 15
My video editor:Movavi Video Editor Plus
www.mvvitrk.co...
Черновая обработка большого блока(фрезерование чпу)
diy cnc
solidworks
cnc milling machine
cnc machining
machinist
cnc programming
milling machine operator job
cnc programmer
cutting edge engineering australia pty ltd
mastercam
operator cnc
solidworks tutorial
cnc laser
torno cnc
cnc diy
#cncmilling #cnc #CncFrezar
Hi. For the D35 cutter, we only have roughing blades for aluminum. Therefore, we did not use a larger cutter. The maximum feed of the machine is 5000 mm / min, it couldn't be faster. I prefer to machine steel...
Why is there so shallow cutting? Aluminium is quite a soft material, you may rough it using parameters that are much more aggresive. Since you are not able to feed fast I would recommend to take at least 3-4mm depth of cut. Example parameters for my machine - D32, 3 insert mill 180 mm overhang BT40: ap:4mm, ae:70-100%, feed per tooth 0,15mm/min, vc=1000m/min, and much COOLANT which lubricates inserts.
@@LubomirPotocki Thanks👍
@@LubomirPotockiI think he's using a high feed cutter so not really suited for deeper cuts. A shoulder milling cutter with APKT aluminum inserts for instance, would have allowed these deeper cuts.
gotta love that near-silent cutting, so smoooooth
Great vídeo 👏👏👏 Greetings from Portugal 🇵🇹
Nice. Very smooth. I wonder, how much those double column machines cost around.
"Estimater looks at drawing after watching RUclips " (YA , that's a 4 minute part!) 😳 lol
excellent work as always. greetings from Argentina!💪
very good video cncfrezar
Great video as always. Can I ask when you are roughing the deep pockets do you include lots of program stops to check tool wear?
Thanks. This is not necessary for aluminum. The blades last about 6 hours of work. Steel max 4 hours.
Алюминий под матрицу это похоже под пластик, материал не очень стойкий. Мне на ремонт не раз привозили под расточку на токарку матрицы, под бутылки, разбивает их, стираются.
Zdravím. Veľmi pekná práca.
Keď potrebujete vyrobiť nejaké menšie diely tam mi napíšte. Máme frézu a zháňame na to robotu. Robíme v CAM.
tak toto uz je machrovinka😂👍👍👍
hello again
do you guys square up your vices before you put in the raw material?
The material is flat. In vices, we first mill it to the size of a semi-finished product. If you mean this.
@@CncFrezar do you use a dial indicator to see if your vices are parallel/squared to each other?
@@Mclayne We will check with a 3D probe. The vices have an accuracy of + - 0.01 mm. Then, we can start working.
How much is that cnc machine?
I don't know, I'm just a worker
💃 Promo>SM.
CNC?