Exactly what you said is what I was saying, I was also saying once you sharpen it back to that point you have to make sure you dont sharpen the steel where the stopper hits other wise it will have a problem, and I also said i wouldnt be completely sure until i sharpen it to that point. But mine hits directly under my edge after sharpening, and if i didnt know any better I could easily sharpen into that spot
I just received my first TwoSun knife from Amazon. Fit and finish are top notch. It is a non-typical design with a great finish. Amazon lists it as "Shinobi TS67 Fire".
night morning design started with clone mech mod vapes and original tube mods. I noticed their quality back then and when i saw them getting into knives i knew we were in strore for higher quality than most chinese manufacture at a lower cost. night morning is my fav chinese design and manufacture company.
Awesome, I have a bunch of The TwoSun`s myself, the TS127 is always in my pocket (G10 Black/grey and 14C28N) also love the TS81 in any config. For the price they are top dogs.
We need a new player to come to market to replace twosun budget knife. A little over a year ago (maybe 2) when I first found them you could get them cheap. Now they are more mainstream and in demand so they are not as cheap. I have several and all have been great!
The G-10 Budget models are still all under $50. For their materials & quality they are still a better deal than any other brand. Thanks for watching!!!
@@slick3129 yes I have a couple. They are nice but definitely not the quality of twosun. I have a couple of defcon knives which are amazing. Little higher in price but well worth the money.
Next to Civivi I love my TwoSuns… I have the TS16, TS89, TS121 (which I anodized) and the TS177. One issue I have with the 89 is the short flipper tab is easy to miss and guillotine the thumb and I have the G10 version which has a super close pocket clip I can barely fit jeans into (see my IG account). I have about another dozen on my wish list but most you did not mention. (TS52, 81, 21, 49, 166, 107, 190, 223) Thanks for the suggestions!
New to your channel, so I'm late to this party. That Silverback is an amazing value. Mine is every bit as good as my WE integrals at half the price. As often as TwoSun releases new models, I'd love the see an updated top 10 list.
Thanks for the show! About 3.75 pounds of some great Ti and steel, there! : - ) My favorite, of the ones you are showing here. Is that TS129. I held off on that one, because I thought it was going to be too small for me. I later went ahead and pulled the trigger anyway, after watching probably my 5th video on it. Stassa put me over the edge, and by then, only the M390 version was available. Wow, I Love that thing! I still shake my head, on days I carry it. Tomorrow. I'd love it if you could put a tape measure on that TS195 integral for us. TwoSun has it as being 8" overall, 4.41" closed, with a 3.0" blade. Those numbers don't add up. If the 8" oal is correct. We're missing 0.590" somewhere. Sometimes, TwoSun gives us cutting edge as the blade length, and sometimes they don't.
Can do, it's a sweet knife!!! It's pretty funny how thing go down, Stassa told me several months ago that my video got him to buy the TS-129. It has been one of my favorites since it's release!!!! Thanks for watching!!
Hi OCD, have a quick question? How much are your CME's because I'd like to send one to my friend Jay, whom you may no as The Knife Beater on you tube. He's also a lefty do if he hasn't tried one I'd like to get one to him. Thanks and keep up the great videos:))
idk if they heat treat their s90v and m390 very well. Saw some videos on them being used and it didnt fair well. their 12c27 and 14c28 are very good though.
I am sitting here looking at twosun number twelve, and a Vespa otf that I ordered mid May, just got it today.very nice otf m390 carbon fiber inlay on handle and blade tritium insert good action.
I have no control over the AD's. YT just sent out an email saying they were going to start putting AD's in all videos over 8 minuets. I know it sucks, but I really don't have a choice. Thanks for watching!!!
Great line up!! Only have to Dynamo and stingray right now. But have bids out. Really dying for the tepe designs hornet V1 in titanium. Can’t find it anywhere though
Yeah, time for a new player to come to make some competition for RUclips. I mean, don't get me wrong, I don't ming the ad at the beginning of the video that can be skipped or watched depending on the interest, but 2 unskippable ads every less than 10mins is really annoying.
I don’t have any Two Sun knives, but they do look really cool. Maybe I’ll end up trying one out one of these days, or get my cousins or brother one for Xmas.
Hi I hve a simple question? I have bought like 7 Two Sun knives and they simply come in a box that says Two Sun but the number of the design is vacant. Ho w do I know I have bought a good one? I have about 3 Night Morning designs and one Jelly Bean design. The rest are just Two Sun. Plz heelp me.
Jerad worried that you could eventually push the knife in past the detent after sharpening. I thought like you did that you would move up the blade, both of you have had it a long time so it must be okay
Those are great looking knives regardless of the price. I really like Mazwan Mokhtar designs and the almost 9 inch Wong design. If you had to choose 1 as your favorite which one would it be??
@@OCD4EDC I wish I could get all of them. Any idea as to which would be the ones to get before they are not available? I realize it would probably just be an educated guess.
Ooh. I’ve got 3 of those and they’re just as good as you say they are. How’s the shipping time on the “tangli” seller on Amazon? They’re estimated delivery dates are pretty far off.
Nice, I'm not sure about the specific seller on Amazon, but the ship times are always about 1/3rd the time of what they list on the website. Thanks for watching!!!
@@davidmarshall7752 Glad to hear you got them though! I was nervous when I ordered a TS-129 from them yesterday, but feel much better now that I've seen your comment.
Yessir, a great top ten list. I own a couple of them (the 129 and 186) and am wanting to add more (too many to list🤣). After acquiring the 186, I discovered that, like the TS 177, it had the ability to "make you bleed your own blood" with the blade in the closed position. When closed, the edge of the blade right at the sharpening choil is VERY CLOSE to the bottom of the scales. I cured that earlier today by slightly extending the sharpening choil which effectively got the blade edge further away from the bottom of the scales. I discovered this inadvertently on the 177 and 186 by laying my finger perpendicular to the bottom of the scales and exerting a bit of pressure while sliding my finger along the scales in line with the blade with it closed. Yes, I know, the cure would be DON'T DO THAT YOU FRICKIN' DUMMY!!! But it's easy to forget TO NOT DO THAT while your fondling and fidgeting with any given knife while watching TV (or knife videos) (I double dog dare ya' to do what I just described to your Russian "mistress". She'll bite the hell out of ya', guaranteed) Anyway, great list and video...and you just increased the price of TwoSuns by at least 10%... DAMMIT!!!😠
William had the exact knife I showed in my video, I thinks it's just a finger size issue. I cannot get my fat fingers in there far enough to touch any part of the blade in any orientation. #SMALL HANDS PROBLEMS LOL
@@OCD4EDC yes, I have relatively small man hands (medium sized gloves) and that is probably a big part of the problem. Whatever the reason, certain knives can and will "make you bleed your own blood". The TS 177 got me THREE TIMES before I sent it back to its original owner. Cut me once, shame on you. Cut me twice, shame on me. Cut me three times and YOU'RE OUTTA' HERE!!!
@@patrickfranklin3548you could very well be right, it might be an issue with early models. But, I do have small (medium) sized hands and that's probably got something to do with it too. Regardless of why, it boils down to the fact that knives are (should be) sharp and they will cut you in various ways and do so before you realize it happened.
Sucks that China is winning in the blade world as compared to US made blades as far as price and material! Although not all have these prices. Nice blade I like the last one the best except for that mark in the blade and the mark alone I’d say it is a design flaw. JMHO and totally respect yours as well. Great video have a great day
I'm not sure what knife you're referring to, but all of the TwoSun models in D2 are way less than $100. Most are under $50. However there are knives with D2 that are $500 & up, from Medford and others. Personally I would not buy those models, but to each their own!!! Thanks for watching!!!!
My favorite love two sun ts243-CF I rock most days
That one is the bomb!
Exactly what you said is what I was saying, I was also saying once you sharpen it back to that point you have to make sure you dont sharpen the steel where the stopper hits other wise it will have a problem, and I also said i wouldnt be completely sure until i sharpen it to that point. But mine hits directly under my edge after sharpening, and if i didnt know any better I could easily sharpen into that spot
It's a sweet knife for sure. I'd say just don't sharpen that far back!!! LOL Thanks for watching!!!
@@OCD4EDC for sure, it might be my favorite one, i also really like the ts223 and 129 and 162
328, 177, 190 for me
All in m390 😍
I’m just learning about twosun, fantastic value. TQVM
Oooh love that Sabre Tooth model.I wish they made it in a larger version with CPM S35VN steel to lessen the price!
A little bigger would be fantastic. However the price is all ready better than anything in the same material & quality level.
Thanks for watching!!!
I just received my first TwoSun knife from Amazon. Fit and finish are top notch. It is a non-typical design with a great finish. Amazon lists it as "Shinobi TS67 Fire".
night morning design started with clone mech mod vapes and original tube mods. I noticed their quality back then and when i saw them getting into knives i knew we were in strore for higher quality than most chinese manufacture at a lower cost. night morning is my fav chinese design and manufacture company.
Nice, Yes Night Morning does great designs!!! Thanks for watching
Love twosun! I was lucky to be an early adopter of some of the earlier models in 2018
Twosun had detent ramps back in 2018, it was crazy back in the day you only see those in 500$+ customs
I agree 14C28N is way better than commercial d2, and twosun is killing it with the price game as well
Awesome, I have a bunch of The TwoSun`s myself, the TS127 is always in my pocket (G10 Black/grey and 14C28N) also love the TS81 in any config. For the price they are top dogs.
Right on, Thanks for watching!!!
We need a new player to come to market to replace twosun budget knife. A little over a year ago (maybe 2) when I first found them you could get them cheap. Now they are more mainstream and in demand so they are not as cheap. I have several and all have been great!
The G-10 Budget models are still all under $50. For their materials & quality they are still a better deal than any other brand. Thanks for watching!!!
@@OCD4EDC yes very true. But I used to be able to get the better materials 50ish dollars. The secret got out though. Lol
They’re new to me! $110 for an S90v blade and titanium body still seems like a great deal.
Have you looked at Artisan Cutlery or Eafengrow knives?
@@slick3129 yes I have a couple. They are nice but definitely not the quality of twosun. I have a couple of defcon knives which are amazing. Little higher in price but well worth the money.
Next to Civivi I love my TwoSuns… I have the TS16, TS89, TS121 (which I anodized) and the TS177. One issue I have with the 89 is the short flipper tab is easy to miss and guillotine the thumb and I have the G10 version which has a super close pocket clip I can barely fit jeans into (see my IG account). I have about another dozen on my wish list but most you did not mention. (TS52, 81, 21, 49, 166, 107, 190, 223) Thanks for the suggestions!
You're saying you like civivi as much as two sun?
I understand that you do custom wood scales ? I was wondering about the process and cost? Thanks Brian
Got my first twosun knife 🔪, T.S. 116 ! 45 $ AMAZING KNIFE ! AWESOME VIDEO !
Nice, The TS-116 is a cool blade for sure. Thanks for watching!
Can you use the Fuller for the thumb in the middle finger flick on the 227?
Don’t have a two suns yet but I will soon! This list really helps!
Just found and bought the TS195 the other day. So hard to find. Can't wait to get it. Great video!
New to your channel, so I'm late to this party. That Silverback is an amazing value. Mine is every bit as good as my WE integrals at half the price. As often as TwoSun releases new models, I'd love the see an updated top 10 list.
Sweet picks...
TwoSun offers great value...
Thanks for the presentation...
Thanks for watching!
Awesome list twosun really does great work I love my 190 and 150
Thanks for the show!
About 3.75 pounds of some great Ti and steel, there!
: - )
My favorite, of the ones you are showing here. Is that TS129. I held off on that one, because I thought it was going to be too small for me. I later went ahead and pulled the trigger anyway, after watching probably my 5th video on it. Stassa put me over the edge, and by then, only the M390 version was available. Wow, I Love that thing! I still shake my head, on days I carry it.
Tomorrow. I'd love it if you could put a tape measure on that TS195 integral for us. TwoSun has it as being 8" overall, 4.41" closed, with a 3.0" blade. Those numbers don't add up. If the 8" oal is correct. We're missing 0.590" somewhere. Sometimes, TwoSun gives us cutting edge as the blade length, and sometimes they don't.
Can do, it's a sweet knife!!! It's pretty funny how thing go down, Stassa told me several months ago that my video got him to buy the TS-129. It has been one of my favorites since it's release!!!! Thanks for watching!!
If the 129 had a forward finger choil I would buy one right now
Hi OCD, have a quick question? How much are your CME's because I'd like to send one to my friend Jay, whom you may no as The Knife Beater on you tube. He's also a lefty do if he hasn't tried one I'd like to get one to him.
Thanks and keep up the great videos:))
idk if they heat treat their s90v and m390 very well. Saw some videos on them being used and it didnt fair well. their 12c27 and 14c28 are very good though.
Really likin the top ten lists. Thanks for sharing brother. 👍🤘
Thanks for putting this brand on my radar! Subscribed and now following 😎
I am sitting here looking at twosun number twelve, and a Vespa otf that I ordered mid May, just got it today.very nice otf m390 carbon fiber inlay on handle and blade tritium insert good action.
Nice, the Vespa OTF is a cool knife for sure!!!!
Two sun and Kubey seem to have the best value for me .
LOVE that Barracuda model.I wish they made new models with traditional flippers instead of the front flipper(just a personal choice I guess).
I get it, Front Flippers are not for everyone. As front flippers go the TS-139 Barracuda is a really good one. Thanks for watching!
Now there's a fuckin top 10 video worth watching 👀 👌
Thanks for sharing the glorious twosuns!!!
Twosun 🤙quality of these knives is awesome
For Sure!!! Thanks for watching!!!
Holy ads batman! Lol
I have no control over the AD's. YT just sent out an email saying they were going to start putting AD's in all videos over 8 minuets.
I know it sucks, but I really don't have a choice. Thanks for watching!!!
@@OCD4EDC I know man, I just hadn't ever seen that before on your channel before. I guess that just means your in the big time now lol! Great vid.
Great line up!! Only have to Dynamo and stingray right now. But have bids out. Really dying for the tepe designs hornet V1 in titanium. Can’t find it anywhere though
Yeah, time for a new player to come to make some competition for RUclips.
I mean, don't get me wrong, I don't ming the ad at the beginning of the video that can be skipped or watched depending on the interest, but 2 unskippable ads every less than 10mins is really annoying.
LOL who still has ads on youtube haven't seen one in years
I don’t have any Two Sun knives, but they do look really cool. Maybe I’ll end up trying one out one of these days, or get my cousins or brother one for Xmas.
Thanks for watching!!!
Hi I hve a simple question? I have bought like 7 Two Sun knives and they simply come in a box that says Two Sun but the number of the design is vacant. Ho w do I know I have bought a good one? I have about 3 Night Morning designs and one Jelly Bean design. The rest are just Two Sun. Plz heelp me.
I wish they would countersink the pocket clip on the Ts165. That and the non nested liners is kind of a deal breaker for me.
Do any of the TwoSun knives you listed or otherwise have reversible pocket clips?
Jerad worried that you could eventually push the knife in past the detent after sharpening. I thought like you did that you would move up the blade, both of you have had it a long time so it must be okay
nice list! Thanks
I just want all the m390 and s90v blades. Mmmmm.
Just bought my first 2 twosuns recently
Nice, I hope you're digging them. Thanks for watching!!!!
@@OCD4EDC didn't get them yet but I'm sure I will! Thanks for the content!
Those are great looking knives regardless of the price. I really like Mazwan Mokhtar designs and the almost 9 inch Wong design. If you had to choose 1 as your favorite which one would it be??
I cannot answer that, it would be like picking one of my kids as my favorite. I say get all of them!!!! Thanks for watching!!!
@@OCD4EDC I wish I could get all of them. Any idea as to which would be the ones to get before they are not available? I realize it would probably just be an educated guess.
Mom always used to say if you can't say anything nice then don't say anything at all. My OCD and I on chinese knives...🤐
Very nice ano on the Maverick.
Thank you!!
Great video! What is the best place to find and purchase these knives?
Ebay and Amazon. White mountain Knives Carrys them as well .
Ooh. I’ve got 3 of those and they’re just as good as you say they are.
How’s the shipping time on the “tangli” seller on Amazon? They’re estimated delivery dates are pretty far off.
Nice, I'm not sure about the specific seller on Amazon, but the ship times are always about 1/3rd the time of what they list on the website. Thanks for watching!!!
Most of my TS's have come from tangli, it usually takes about one month. Right now it could be longer.
@@davidmarshall7752 Glad to hear you got them though! I was nervous when I ordered a TS-129 from them yesterday, but feel much better now that I've seen your comment.
Hey OCD, are you a TwoSun fan lol sorry couldn't resist
Were these knives purchased by you?
oh man that 186 looks like its gotta find a way into my hand
It's a great knife for sure, I fully recommend picking one up. Thanks for watching!
Great list Justin. I want them all. Lol
Well all of the links are in the video description!!!!
Thanks for watching!!!
@@OCD4EDC Yep, I put a few on my Amazon wish list. Take care!
WHAT ARE “FACE BALLS”?
Do you have them?
Eyeballs! Everyone has them 🤣
Yessir, a great top ten list. I own a couple of them (the 129 and 186) and am wanting to add more (too many to list🤣). After acquiring the 186, I discovered that, like the TS 177, it had the ability to "make you bleed your own blood" with the blade in the closed position. When closed, the edge of the blade right at the sharpening choil is VERY CLOSE to the bottom of the scales. I cured that earlier today by slightly extending the sharpening choil which effectively got the blade edge further away from the bottom of the scales. I discovered this inadvertently on the 177 and 186 by laying my finger perpendicular to the bottom of the scales and exerting a bit of pressure while sliding my finger along the scales in line with the blade with it closed. Yes, I know, the cure would be DON'T DO THAT YOU FRICKIN' DUMMY!!! But it's easy to forget TO NOT DO THAT while your fondling and fidgeting with any given knife while watching TV (or knife videos) (I double dog dare ya' to do what I just described to your Russian "mistress". She'll bite the hell out of ya', guaranteed)
Anyway, great list and video...and you just increased the price of TwoSuns by at least 10%... DAMMIT!!!😠
I have 2 ts177’s and I can’t touch the blade in the closed position even if I try? Maybe it’s just the early ones.
The Russian Bites for sure!!!! Thanks for watching!!!
William had the exact knife I showed in my video, I thinks it's just a finger size issue. I cannot get my fat fingers in there far enough to touch any part of the blade in any orientation.
#SMALL HANDS PROBLEMS LOL
@@OCD4EDC yes, I have relatively small man hands (medium sized gloves) and that is probably a big part of the problem. Whatever the reason, certain knives can and will "make you bleed your own blood". The TS 177 got me THREE TIMES before I sent it back to its original owner. Cut me once, shame on you. Cut me twice, shame on me. Cut me three times and YOU'RE OUTTA' HERE!!!
@@patrickfranklin3548you could very well be right, it might be an issue with early models. But, I do have small (medium) sized hands and that's probably got something to do with it too. Regardless of why, it boils down to the fact that knives are (should be) sharp and they will cut you in various ways and do so before you realize it happened.
Flippers are so boring, you should do a video on two sun knives that have alternative action.
Sucks that China is winning in the blade world as compared to US made blades as far as price and material! Although not all have these prices. Nice blade I like the last one the best except for that mark in the blade and the mark alone I’d say it is a design flaw. JMHO and totally respect yours as well. Great video have a great day
The first knife is a TS81, not TS89.. s90v version has CF inlay, not black bone inlay. Stop being sloppy Justin
My word they are slamming us with ads!!
Sorry, I don't have control over the AD placement. Thanks for watching!!!
Real Fanboy!!!
A hundred bucks for a knife with D2 Steel in it? Somebody's making a nice profit margin on that. For that much money I'd expect a better Steel.
I'm not sure what knife you're referring to, but all of the TwoSun models in D2 are way less than $100. Most are under $50.
However there are knives with D2 that are $500 & up, from Medford and others. Personally I would not buy those models, but to each their own!!! Thanks for watching!!!!
And you don't even have a Monarch...
The Monarch is a fine knife and I like it, but it's not my favorite. Thanks for watching!!!
The irony of the American flag in the background while you promote Chy-na crap! Jackass!
Two sun is horrible designs