Did as you advised and it worked perfectly (previous attempts with two locking pliers did not work); also used the two peg tool. Three things: 1. the model is LE 750 2. The nut is 9/16ths. I first attempted 14mm (why would B&D be metric???) and it was too small, yours must be stripped a bit. 3. Once the nut broke loose, I sprayed some penetrating lubricant and only had to use bare hand to work the nut from there. Again, thank you so much for posting this vid, I am upgrading my blades to 7-11/16ths long.
hi . I just replaced my old one blade and now when i turned on the blade just goes stripped even the blade is proper tight with the screw and everything so the motor is working good but the blade don't move on . Do you know how fix that , it has any solution .
@@mytwogoodhands2799 bolt head no turn and yes I used both spacers and tight them , somebody else told me there's noway to fix that ..I may should buy a new one . Thanks for your time .
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Did as you advised and it worked perfectly (previous attempts with two locking pliers did not work); also used the two peg tool.
Three things:
1. the model is LE 750
2. The nut is 9/16ths. I first attempted 14mm (why would B&D be metric???) and it was too small, yours must be stripped a bit.
3. Once the nut broke loose, I sprayed some penetrating lubricant and only had to use bare hand to work the nut from there.
Again, thank you so much for posting this vid, I am upgrading my blades to 7-11/16ths long.
Glad to hear that it helped you, Please subscribe and use Amazon link to shop on Amazon as it helps support the channel Steve
Thank you! Best video. Answered some questions that none of the other videos I watched did
Glad it helped Please subscribe to the channel Steve
Superb attention to detail. Really appreciate that. I'm fixin to change my blade today. TY
Thank You, Please like and subscribe to the channel Steve
Hey thanks for you help on this
Your welcome Steve I added Amazon link if you can't find it easy
I put in 2 blades for a wide cut
Nice idea!!! Thanks for haring
hi . I just replaced my old one blade and now when i turned on the blade just goes stripped even the blade is proper tight with the screw and everything so the motor is working good but the blade don't move on . Do you know how fix that , it has any solution .
Does the bolt head turn? It should turn Did you use both spacers? I have never taken mine a part to know it there is a coupler in the system.
@@mytwogoodhands2799 bolt head no turn and yes I used both spacers and tight them , somebody else told me there's noway to fix that ..I may should buy a new one . Thanks for your time .
@@israguitarra this is mine amzn.to/3BQ3WMj