@@MadeByHusslove the video. How do you determine the mm(thickness) of the finish chain? Say for instance if I wanted an 22in 8mm chain how do I decide what size links to use? There has to be some type of guide u must follow so your not under/over the desired size. I’m really curious
@@kdhb95 well I need a 4 mm gap I guess I’m will need a 4mm rod all so I all ways make a sample a couple of inches to see than I can weigh it to work out how much metal I need
Kotikjeff So u think this guy did a good job soldering???? 🤔🤔 54 years and can’t tell a bad soldering job from a good one 🤦♂️🤦♂️🤦♂️ I hope ur retired..
Not so keen on the music chosen , as a suggestion , a nice soft music would go well with all videos ( just my opinion as jewellry making is artistic , used in all cultures) ......Thanks Great videos
I always loved this style just never knew how to make it, Thank you for uploading this vid, until now I just realised jump links is so vast in what is able to be crafted from it. :)
friend your work so beautiful and your hands seems to clear with patience ! everything is good but I preferred to see how you rope the rings , I mean if it was like a tutorial it was more good but anyway thxxx for all what you done )))
yes i know but I'm working on a new video new hopefully its what you want ill try to make it a tutorial i just don't have a lot of time to film its coming soon thanks
approx.how long it took u to make the chain. not include the lock. very good work. I am a goldsmith over 4O yrs. still working. but I not sure if I will make one gold or silver as nice as u.
+MadeByHuss I have a couple questions. First, how many links intersect a single link, and second what is the purpose for leaving the links open? I guess you soulderd them later?
Pablo Luciano every ones be hating the music except you I have new better videos about rope chains and there easy to make be sure to check them out thank you
Good job . You can use a tumbler to not wear the surface of the tubes , the polishing will be even and uniform , then you can give it a final luster with the buff .
Hi, loved watching this... one point, can you check that the camera is pointing on the work you are doing, please. Sometimes important actions are outside the camera frame. Hope you don’t mind me saying that. Otherwise excellent work and thank you
Kostana Banjac don’t mind at all it’s hard doing every thing so I messed up but I do have other videos that are better on how to make a rope chain but thank you for watching and your comment
MadeByHuss I am in the process of fixing a “rope chain” necklace I don’t see a lot of tutorials I think your video is the only one I’ve found. Just trying to figure out how to connect the the jump rings I have are more of an oval shape not round like your jump rings. Thanks I’ll wait for your next tutorial
When you pull the wire through the reducer plate, how do you get it started through the next smaller size hole? You can't push it through to get it started can you? Seems like if that were the case, the wire would bend first, thanks.
Mad skills by the way, at my work we have a large rollin mill we can roll quite a bit larger stuff. Every day there is tantalum, uranium and other exotic metals being rolled, it's got two 20" hydraulic cylinders to apply pressure so you can imagine the separating force at 1000psi it is 314 tons of separating force, it has the capability to go to 4000 psi, I thought your drawing process was good. I would be curious to know how much silver goes into a bracelet
What solder do you use and flux? Do you dip the rings into a solder fluid after the solder has been made? Also where would you suggest buying silver wire from as I don’t have access to the equipment to melt the silver bars down to create my own wire 😕 Thanks for the video though it is very straight forward and easy to follow💯 A lot of people will appreciate this!! Upload some more!! Old love to know how to make a ring on a budget🤷♀️ or a ring with diamonds in! This is the sort of stuff I love to make but just don’t have the knowledge to do unless I have the amazing videos to follow by!! Keep it up!!
Mynamesisseptic 123 I used easy silver solder if your in the uk you buy from Walsh , cooksons and Euro findings they all have a website please check out my other videos where I make a rope chain with no solder it’s not as strong but it will give you a idea on how to start all so you can make them from copper as I did for some samples just to show the different sizes thank you for your comment and best of luck
watched it 20 times still don't understand how it works and how it remains so supple even though you sort of solded everything together . But it looks great . I am not giving you credits for how informative your video is , because it explains nothing to my opinion , but this is not your job to make video so i should expect anything more than a great craftsman creating a great bracelet and that , you surely are and surely did . I would pass an order if you sold those .
Morgan Olfursson hello thank you for your feedback check out my latest tutorial I don’t use as many links and much easier to do let me know what you think thank again
AR for chain links? por favor. What size wire are you using and the size rings. Aspect Ratio. Please wanting to try this weave. My mother had one.in gold. Thank you. Very good video.
So nice work, i would like do the same but un 6mm of broad, please can you tell me size of broad of the metal in mm AND diameter of circle of every piece please
Can you do this with smaller jump rings for a small necklace size, because I want to start making jewlery and this process seems easier than that of loop in loop chains
Yes you can and you don't have to do it the way I did when linking the chain you link ever two together so 5,6 link ,link with 1,2 I need to do a video on this hopefully soon
Unfortunately the visual quality is pretty bad the lighting too it was difficult to distinguish what was happening. I do hope you use high end camera in the future. Anyways, your craftsmen work is top quality.
Hello, congratulations! very excellent video. My family has been working in jewelry for more than 30 years. We want to make a chain equal to 60 cm. and weighs approximately 20 gr. How much wire would we need to be able to do it?
Diana Perez Alvarez this chain weighs about 70grams then finished I all ways start with the weight you have to use a bit more then the final finish a 20 gram chain will be very small to do most are made by machine thank you
Hi, thanks very much for your video, could you please let me know regarding the very first two rings: do you solder them form one, or from two sides? Many thanks.
great video! Ive been looking for this for ages! can you tell me the name of the pattern or show a close up on how many jumps in each twist? I can never get the spiral effect down right
At around 2 minutes, you start rolling the flat wire up. Why do this instead of just using thinner round wire? I’m just starting out teaching myself; no formal training.
MadeByHuss can you do a detailed tutorial about forming these hollow wires? I can’t offer anything in return except my thanks. Btw, this video gave me some great new ideas already.
Easy just use a solid link it's put together the same way I hope I get the time to make a new video about it soon and a little easier way of doing it instead of linking every 6 links together it's every 4 it all depends on the size.
You can specify the size of the wire and crossbars I tried and could not asked for too much in size thanks in advance Вы можете указать размер проволоки и ригелей Я пытался и не мог просил слишком много размера Спасибо
Thank you for showing this, beautiful work! I'm interested in the classic mens bracelets designs, is there a source or route you can suggest that has different styles and the ways to make them?
+MadeByHuss thanks for sharing, I'm surprised with how ancient methods have worked that there's vey few to be found. It seems like smithing is a lost practice that fading with its secrets too.
Yes that's why I made mine big and it's not as thin as the ones you can buy ready made they break all the time have have to repair them but the point of the video is to show how it's made there for you can all so make it solid
Notes on the process: Those links are a bit loose, not as loose as the ones on the rope bracelet where you can barely tell that it's a rope but still. Also putting a box lock on a rope chain!?? It's a round link, should have been a barrel lock. At least you used some good music for the video, unlike most jewelry videos that use generic elevator crap music.
Hello i kindly ask you if you can help me with a detailed tutorial because i dont get it :( i mean i use stainless steel and i tried now since 2 weeks and it doesnt work Thank you very much for your Feedback
WOW. I am truly impressed. This has to be the first time that the thumb nail was an understatement. I'm at a lost for words. All I can say is WOW.
Jennifer Kleczka Thank you
😊
@@MadeByHusslove the video. How do you determine the mm(thickness) of the finish chain? Say for instance if I wanted an 22in 8mm chain how do I decide what size links to use? There has to be some type of guide u must follow so your not under/over the desired size. I’m really curious
@@kdhb95 well I need a 4 mm gap I guess I’m will need a 4mm rod all so I all ways make a sample a couple of inches to see than I can weigh it to work out how much metal I need
I wish that more jewelry making videos had music this good.
Hi, been in the trade for 54 years, very nicely done. Thanks, Jeff
Thank you Jeff
Kotikjeff
So u think this guy did a good job soldering???? 🤔🤔 54 years and can’t tell a bad soldering job from a good one 🤦♂️🤦♂️🤦♂️ I hope ur retired..
its about time somebody on youtube showed us how its made
I could never work this chain out. Thanks a Million. You are very kind. Cheers.
Not so keen on the music chosen , as a suggestion , a nice soft music would go well with all videos ( just my opinion as jewellry making is artistic , used in all cultures) ......Thanks Great videos
Thank you for watching
I always loved this style just never knew how to make it, Thank you for uploading this vid, until now I just realised jump links is so vast in what is able to be crafted from it. :)
I'm a jewler myself and i never thought rope chains were hand made! nice job
Franklin España this time not made by hand sir.. fasti machin is veri well prodacthion...
Franklin España
Am surprised by your experience.
Then your not a legit jeweler since you didn't know how one of the most common and simple link type chains is made, or can spell the word jeweler.
'how to make chain by hand' first step, get a bunch of machines to use...
Lol I like it great comment
Wonderful video . Beautiful work !
Best music ever.🎉
great video but I like when Rope chains are filed.
Is this rope safe for climbing ?
hermosa labor gracias por compartir estos hermosos videos.....felicitaciones
Jorge Florez thank you
friend your work so beautiful and your hands seems to clear with patience !
everything is good but I preferred to see how you rope the rings , I mean if it was like a tutorial it was more good but anyway thxxx for all what you done )))
yes i know but I'm working on a new video new hopefully its what you want ill try to make it a tutorial i just don't have a lot of time to film its coming soon thanks
MadeByHuss thank you so much !!!
approx.how long it took u to make the chain. not include the lock. very good work. I am a goldsmith over 4O yrs. still working. but I not sure if I will make one gold or silver as nice as u.
Man N His Pen thanks about 4 weeks but I work on it about 2-3hours a day I'm hoping to make another video with tutorial
Never tire with watching true craftsmen work
Howard Bamber thank you
+MadeByHuss I have a couple questions. First, how many links intersect a single link, and second what is the purpose for leaving the links open? I guess you soulderd them later?
Hello I linked6 links but solder every 2 but the best way I'm doing now is 4links it sits better I need to do another video
Thanks, man. I don't know much, but when I watched, I was thinking that the aspect ratio might be off, as the chains didn't quite lay right
great work umca
Gracias por compartir sus conocimientos es una ecxelente persona felicitaciones nunca cambie saludos desde Puebla México
@00:48 where can i get that rollers and whats the exact name?
There called rollingmills there found on the net like eBay
great video, good music choice as well
Pablo Luciano every ones be hating the music except you I have new better videos about rope chains and there easy to make be sure to check them out thank you
Nice work
Good job . You can use a tumbler to not wear the surface of the tubes , the polishing will be even and uniform , then you can give it a final luster with the buff .
Hello yes I did it but didn't film it sorry
Thanks
Hi, loved watching this... one point, can you check that the camera is pointing on the work you are doing, please. Sometimes important actions are outside the camera frame. Hope you don’t mind me saying that. Otherwise excellent work and thank you
Kostana Banjac don’t mind at all it’s hard doing every thing so I messed up but I do have other videos that are better on how to make a rope chain but thank you for watching and your comment
wow that's cool, so would this be a hollow one ore solid?
It's hollow
Fantastic work, and a beautiful product! Thanks for the video. :)
Thank you you're welcome
You moved out of the screen after you did two how did you do the 3 and 4?
hello Mooshi i know but I'm working on a new video its a tutorial coming soon watch out for it thank you
MadeByHuss I am in the process of fixing a “rope chain” necklace I don’t see a lot of tutorials I think your video is the only one I’ve found. Just trying to figure out how to connect the the jump rings I have are more of an oval shape not round like your jump rings. Thanks I’ll wait for your next tutorial
Mooshi Mooshi hi new video out now hope it’s helps you
When you pull the wire through the reducer plate, how do you get it started through the next smaller size hole? You can't push it through to get it started can you? Seems like if that were the case, the wire would bend first, thanks.
Yes you're right you make the first end thin and in to a point by filing it in to a point
Mad skills by the way, at my work we have a large rollin mill we can roll quite a bit larger stuff. Every day there is tantalum, uranium and other exotic metals being rolled, it's got two 20" hydraulic cylinders to apply pressure so you can imagine the separating force at 1000psi it is 314 tons of separating force, it has the capability to go to 4000 psi, I thought your drawing process was good. I would be curious to know how much silver goes into a bracelet
Cool You should make a video on it
Great job!! Thank you for sharing!
I am from Morocco and I am good at making such a golden chain
👌 शाहिल यादव 👌 गोविंद लाल
What solder do you use and flux? Do you dip the rings into a solder fluid after the solder has been made? Also where would you suggest buying silver wire from as I don’t have access to the equipment to melt the silver bars down to create my own wire 😕
Thanks for the video though it is very straight forward and easy to follow💯
A lot of people will appreciate this!! Upload some more!! Old love to know how to make a ring on a budget🤷♀️ or a ring with diamonds in! This is the sort of stuff I love to make but just don’t have the knowledge to do unless I have the amazing videos to follow by!!
Keep it up!!
Mynamesisseptic 123 I used easy silver solder if your in the uk you buy from Walsh , cooksons and Euro findings they all have a website please check out my other videos where I make a rope chain with no solder it’s not as strong but it will give you a idea on how to start all so you can make them from copper as I did for some samples just to show the different sizes thank you for your comment and best of luck
MadeByHuss thanks for the reply I’ll look them up are you able to make Cuban links?? That’d be something old be highly interested in seeing
Mynamesisseptic 123 I haven’t made one yet I hope so some day I need a lot of silver for it but I do want to make it
MadeByHuss okay nice that seems good!!!
soundtracks armonazing with the video, i love it❤❤❤
thank you
Nice jewellery
Thanks for watching
I really miss being in and around the workshop
MSH Skcirdneh
impressive
LxTxSURGE thank you
Thanks for the share, great soundtrack too!
FUCKING GORGEOUS!
Loved the epic music, kinda reminded me of lord of the rings when sauron constructed the rings and all that
Robert Thomas thank you
watched it 20 times still don't understand how it works and how it remains so supple even though you sort of solded everything together . But it looks great . I am not giving you credits for how informative your video is , because it explains nothing to my opinion , but this is not your job to make video so i should expect anything more than a great craftsman creating a great bracelet and that , you surely are and surely did . I would pass an order if you sold those .
Morgan Olfursson hello thank you for your feedback check out my latest tutorial I don’t use as many links and much easier to do let me know what you think thank again
Awesome work!
What size torch tip are you using?
Kyle Osnack for heating up I used a 7 for micro flame I’m not sure but I cut the end off to make it short
That's what i call starting from scratch! Incredible. Thank you!
very good video, good material, but music seems from the underworld !!!! It was driving me crazy!!!!
AR for chain links? por favor. What size wire are you using and the size rings. Aspect Ratio. Please wanting to try this weave. My mother had one.in gold. Thank you. Very good video.
I don't unstand
1.60mm thick
With laser welding it's easy... If solder each separate link, one by one, there are a lot of chances to waste it.
So nice work, i would like do the same but un 6mm of broad, please can you tell me size of broad of the metal in mm AND diameter of circle of every piece please
excelente trabalho, pode me dizer que tipo de solda voce usa durante a montagem? é a laser ou de ponto? obrigado.
i don't understand but yes i lazer soldered it first
ok. obrigado.
+Luke Smith i found it on RUclips editor it was the only sound long enough for the video
Can you do this with smaller jump rings for a small necklace size, because I want to start making jewlery and this process seems easier than that of loop in loop chains
Yes you can and you don't have to do it the way I did when linking the chain you link ever two together so 5,6 link ,link with 1,2 I need to do a video on this hopefully soon
Very nice work. How does making a solid rope chain vs a hollow rope chain differ?
hollow is much more work but lighter in weight
Whats up with the haunted house music 😂other than that great video
I felt the same way that's why I had to share
MadeByHuss а
+John pro Lolik thank for watching
John pro Lolik
+Luke Smith no I changed it I found the music on the RUclips edit music option I think it was classic
MadeByHuss white gold??
ESPETACULAR, meus parabéns!
Bravo 👍🏻👍🏻🧿🧿🧿🧿🧿🙋♀️🇦🇿
selam
@@MadeByHuss belə ələykum salam. Bizim dili bilirsiniz yəqin
@@MadeByHuss çox zəhmətli işdir və çoxda gözəldir. Usta, əl işinizə heyran qaldım. Maşallah olsun
@@zeminezemine7141 ever Ben turkum
@@zeminezemine7141 sagol
I just want to make one out of just wire
Sure you can I have other videos showing that
Uhu
@@MadeByHuss ya
Is that a hollowed tube straw? If so why did you do that?. You could of gone for solid wire instead
Do you have a video on how to make hollow tubes?
Yes I just wanted to make it lighter and to show how it's made
+dread knot no but you can see on this video hopefully
Unfortunately the visual quality is pretty bad the lighting too it was difficult to distinguish what was happening. I do hope you use high end camera in the future. Anyways, your craftsmen work is top quality.
+dread knot sorry i use my ipod
Thanks that make me feel good
Hello, congratulations! very excellent video. My family has been working in jewelry for more than 30 years. We want to make a chain equal to 60 cm. and weighs approximately 20 gr. How much wire would we need to be able to do it?
Diana Perez Alvarez this chain weighs about 70grams then finished I all ways start with the weight you have to use a bit more then the final finish a 20 gram chain will be very small to do most are made by machine thank you
Very beautiful very nice brother
Thank you brother
The sinister music is hilarious. I keep expecting to see a shadowy figure in the background.
Hi, thanks very much for your video, could you please let me know regarding the very first two rings: do you solder them form one, or from two sides? Many thanks.
Thank you
You can solder both to start with after that you can just do one but you can do both if you wish
MadeByHuss it's still not quite clear, would you please post a video of how you solder the first and second pair of rings? Thank you very much.
+Lenok Lis in the video I hold it in my hand that's how you solder it then you add another 2links and so on
Nice work bro, now I appreciate even more my rope chains. By the way what is the name of the song used in this video?
İm not know i found it on RUclips editor it was the only song long enough for the video I hate it and can't change it lol
MadeByHuss haha well its a little bit dramatic, it seems like you're making the rope chain of the cursed souls.
What diameter jump ring is that and what size diameter wire are you using
AHMAWAN shiro parrish check out my new video on my channel I explain it better and it’s easy to do thanks
This is process for hollow or solid chains the same
LLGS ELEMENT yes the same
great video! Ive been looking for this for ages! can you tell me the name of the pattern or show a close up on how many jumps in each twist? I can never get the spiral effect down right
I do show that in the video it's every 2 links
Very Nice 👍
hassan nawaz thank you and check out my new videos to
Wow had no idea, hand made all the way down to the clasp
want to make that out of copper have alot of it . found it in the trash . people put Romex wire in the trash all the time
How many grams where used?
Hill Larry US the finish is 175.11grams I can’t remember how much I started with but you all ways need extra I had to make more because it was short
@@MadeByHuss ok thans for respond :) do u know hm this eoil weight in gold?
9k times it by 1.1
18k times it by 1.55
if you want to make a necklace like this with a length of 60cm, how long is the first ingredient, please help sir
Robi Andesko this chain is about 60 cm it’s 24 inches this was the first video my other video it’s more easy and less links good luck
@@MadeByHuss Good sir, thank you, always give us interesting and useful videos
At around 2 minutes, you start rolling the flat wire up. Why do this instead of just using thinner round wire? I’m just starting out teaching myself; no formal training.
Rob Howe that’s if your making it solid wire witch I have other videos on but this one is hollow that’s why
MadeByHuss can you do a detailed tutorial about forming these hollow wires? I can’t offer anything in return except my thanks. Btw, this video gave me some great new ideas already.
Rob Howe I’m working on something new so it would be difficult now but if you have any questions I will try to answer them thank for your comment
what if u wanted it solid, how are those made. a solid rope chain, not hollow
Easy just use a solid link it's put together the same way I hope I get the time to make a new video about it soon and a little easier way of doing it instead of linking every 6 links together it's every 4 it all depends on the size.
Impressive work.
Thank you
what is the name of the tool you use to roll out the silver ingot into a fine(r) diameter rod?
thanks! very interesting process.
Rolling mills
thanks. what is the particular brand of rolling mill? do you recommend a brand?
+Jason Weiss the one we use is DURSTON
So you start with a laser first?
Yes that's right it can be done with out but it's more difficult and takes longer
Could you make me one? Willing to pay good money!
Sorry Mel I’m only showing how it’s made for now Thanks
I am indian gold maker👌
B Sanjai Thank you
I wonder hm will something like this cost but in 14k gold like 8mm 24 inch
I'm just guessing about 4k
hello, I could tell what the gauge silver wire and which esel diamentro of the ring, thanks
The music makes me feel like something terrible and creepy is going to happen at some point.
I wish I didn't use it but it's too late now
😂😂
You can specify the size of the wire and crossbars
I tried and could not asked for too much in size
thanks in advance
Вы можете указать размер проволоки и ригелей
Я пытался и не мог просил слишком много размера
Спасибо
What one the links are 1.60mm thick
Thank you for showing this, beautiful work! I'm interested in the classic mens bracelets designs, is there a source or route you can suggest that has different styles and the ways to make them?
İts just a cace of searching for it I don't know my self but I have found a couple on you tube
+MadeByHuss thanks for sharing, I'm surprised with how ancient methods have worked that there's vey few to be found. It seems like smithing is a lost practice that fading with its secrets too.
Hollow chains are absolute garbage jewelry. They break super easily. But the video itself was cool to see the process!
Yes that's why I made mine big and it's not as thin as the ones you can buy ready made they break all the time have have to repair them but the point of the video is to show how it's made there for you can all so make it solid
MadeByHuss is there a difference in the process of its made solid
@@Tealtown408 yes ... The difference is you don't make hollow wire.
do you have a storefront that we may look and buy ?
Sorry my friend I don't I'll let you know if things change thanks
can you write wire and circle diameter? and did you welding every circle to each other?
Its solder to every other one so every two are soldered each two
+MadeByHuss diameter is 1.60
+MadeByHuss for example 1st 2nd 3rd 4th 5th circles
1st and 2nd circle solder, 2nd and 3rd not solder, 3rd and 4th solder, 4th and 5th not solder?
+Kenan “FullNull” Ibrahim 1and 2nd are soldered and3and4 then 5and6every other 2
Thanks :) its very interesting
how they can do this it's very difficult work
Notes on the process: Those links are a bit loose, not as loose as the ones on the rope bracelet where you can barely tell that it's a rope but still.
Also putting a box lock on a rope chain!?? It's a round link, should have been a barrel lock.
At least you used some good music for the video, unlike most jewelry videos that use generic elevator crap music.
This was my first one I made I’ve made a better one in gold the video is on my channel also the lock is different thank you for watching
What width and diameter is that one
Shiro AHMAWAN parrish 12mm
Nice job
Ali Nantoume Thank you brother please check out my other videos
Osm ji
where your shop
It's not a public shop sorry but I will try to help
What is the name of the machine you are using in 0:29?
Do you know where I could buy one. Thanks great vid!
Rolling mills I'm sure you can fined on the internet or eBay
who was this for ?
Melting Faces just for me and I wanted to show it for RUclips
How long does it take
I took me about 20 hours I think
How much. and could you make me wanna them
Sorry there not for sale I just made for RUclips thanks for watching
do u live in New York area or long island
Sorry my man I'm from the UK London
Truly amazing.
john broomhall Thank you
I want to make a bracelet 40g. and 17 cm including brooch, you can help me, please
Do you have a work shop
yes a basic, but that little by little. thank you very much
+reyvon joyeria any time I'll try to help
Nice vid man !! :D
Do anyone know of a place I can see how to make "Knight Chain" pattern ?
I don't know what that is do you have a picture
Hello i kindly ask you if you can help me with a detailed tutorial because i dont get it :( i mean i use stainless steel and i tried now since 2 weeks and it doesnt work
Thank you very much for your Feedback
I'm not sure about stainless steel is very hard are you trying to make it hollowed
Its massive wire 2 mm thick if that helps
I just get it like a rope chain when i hold it in the hands :/ and when i release it looks like modern art
+Black Dogg what I do at the start use some super glue to hold it in place then solder
Just superglue 😶thats the trick.. I will try today again thanks a lot for your help
+Black Dogg yes just the first 6-8 links to star you off