You did not Hide any step ... We have something in Islam called passing the knowledge honestly without money. Its a charity work. Thanks a lot for that video really. Greetings from Egypt
You are either very patient or very talented, haha - Perhaps such a beautiful piece requires both! Your work is simply incredible. Thank you so much for sharing your process!
I love making Byzantine jewelry with Bright Aluminum jump rings; However, think I'll stick to 20-14 gauge pre-made rings. I give some of my jewelry away, can't imagine the work you put into making one bracelet. I once made 8 Graduated Byzantine bright aluminum necklaces for my sisters & nieces starting with 14 gauge to 20 gauge rings. You are a True Craftsman!! 👍
Very nice job! But would it not make the final soldering easier if you used hard solder on the flat rings? I'm just a happy amateur in this, but I would certainly mess up the final soldering job in the bracelet...
The place I work at we just printed the links and assembled it. I dont like the idea of printing the links but it was to have stone seats in it, and was a big thick boi
Great skills, looks amazing. Do you have an online store or can you make a piece for me? I came across this video while searching for a flat byzantine chain. I need one about 16” long in sterling silver and can’t find one online.
A lot the tools needed from 500 hundred to 5k thats just to start depends on what your making I have a list of tools in the bio you can fined them on sites like cooksonsgold and walshtools along with the cost hope this helps
Hello I have 1 question I want to make a gold rope chain and gold rope braclet and I dont know where you find the gold wire if you bought it from a website can you link it for me please.
@@MadeByHuss Maybe the wire should be 4mm thick to make solid links NOT hollow. So what will the cost be to make a 40 inch length 30mm wide (DIAMETER) rope chain necklace with Marine Stainless Steel 32mm Snap Shackle with Swivel Bail.... I don't have a way to attach a picture of to this reply
Mate check out dynamis jewlery he uses an rasier method than yourself when making the links using a drill using a simple bit of coiled wire watch one of his vids and youll see what im on about
great video. With me like, greetings from Russia
Thanks for watching
Х
You did not Hide any step ... We have something in Islam called passing the knowledge honestly without money. Its a charity work. Thanks a lot for that video really. Greetings from Egypt
Yes thats right selam brother
You are either very patient or very talented, haha - Perhaps such a beautiful piece requires both! Your work is simply incredible. Thank you so much for sharing your process!
Thank you for watching
Excellent work, really.
Can you please make a video about how to clean silver jewelry at home ?
This is gorgeous! Thank you for making this video!
Thank you
I love making Byzantine jewelry with Bright Aluminum jump rings; However, think I'll stick to 20-14 gauge pre-made rings. I give some of my jewelry away, can't imagine the work you put into making one bracelet. I once made 8 Graduated Byzantine bright aluminum necklaces for my sisters & nieces starting with 14 gauge to 20 gauge rings. You are a True Craftsman!! 👍
Thank you 🙏
20-14 - i thought you mean 2014 year 🙂
Stunning!!! I want this braclet!☺👍it ' s a thumbs up for me.!
Thank you so much
this is f'n awesome! Thanks for detailing your process, it helps a lot ;)
thank you for watching
your coat
hanger wire jig is very clever!
"fanks" for an excellent tutorial! :)
I was just going to say that! You can always find a use for old wire hangers!
great workmanship!!! thank you for this beauty, mate
Thanks
That looks beautiful man!
Thank you
Nuts incredible… beautiful ❤
Thank you
You are geniuses it looks gorgeous
Thanks for watching
Good bracelet turned out. 👍
Хорошая работа! 👍👏🥂
Great work, i like the shape of the lock hope u put a video on how u made it
Thank you
Outstanding tutorial sir! Thank you!
Thank you for watching
This is great!
Thank you
Very nice work! Thanks for sharing your skills.
Thank you for watching
Just watching again😂… incredible work ❤
Thank you
Thanks to your videos i have been able to make a byzantine chain ..thank you
That’s cool thanks for watching
Fascinating!
thanks
Amazing work. Thank you so much for sharing. Very unique piece
thank you so much for watching
Great job! Thank you for sharing!
Thank you for watching
Love your videos man👍🏽👍🏽
Thank you so much
Now I like that!!!!
Enjoyed your video and I gave it a Thumbs Up
Thank you
@@MadeByHuss You're welcome
Very good very cool keep it up.
Wow, beautiful work. Masterful. 👍
Thanks
Nice work first time watcher
Thanks for watching
Beautiful!
Thank you
Buena, muy buena. Gracias.
beatifull job...congratulations...from Chile
Thanks
thank you for the video, beautiful beautiful work
Thank you for watching
Truly magnificent 👌🏻
Thank you
Beau travail...merci de nous le partager!
Thank you
Amazing!
Thanks
thankyou hunni, from a baby smith here this is truly inspiring thankyou kindly x
Thank you
Hermoso trabajo!
Thank you
❤très bon travaile .
I have this chain in 8mm sterling there gorgeous
Thats so cool
Thanks
Would love to buy this bracelet.
Very nice job! But would it not make the final soldering easier if you used hard solder on the flat rings? I'm just a happy amateur in this, but I would certainly mess up the final soldering job in the bracelet...
You can do so yes I have more easy solder so I just use that Thanks for watching
Pretty design
Nicely done!
Thank you
The place I work at we just printed the links and assembled it. I dont like the idea of printing the links but it was to have stone seats in it, and was a big thick boi
Well some times that has to be done that way thanks for watching
Cantik banget...👍🏻
Nice work
Thank you
Nice, and good choice of music
Thanks for watching
Really enjoy your work. Did you make or just find the right clasp handy?
I made it but didn’t have time time to film it and I was trying to keep the video short Thanks
Beautiful
Thank you
Great job
Thank you
Thanks Huss, a little late, this is a great lesson !!
Any time is good
C'est un très bon travaile bon courage bravot
Great job... thinks
Amazing
Thank you
👍 thanks
😊👍
Great skills, looks amazing. Do you have an online store or can you make a piece for me? I came across this video while searching for a flat byzantine chain. I need one about 16” long in sterling silver and can’t find one online.
Thank you for watching I’m only showing how it’s made
Nice job keep up
Thank you
Lindíssima 😍 😍👏👏👏👏👏
Thank you
Ohhh 😲 nice
Thanks
Gode job 👌👏
Thank you
👍
FYI for safety Dont hold the coil while you saw.
@@joyboibob I did just be careful
Realistically, how much of an investment would you say is required to get started in the jewellery business?
A lot the tools needed from 500 hundred to 5k thats just to start depends on what your making I have a list of tools in the bio you can fined them on sites like cooksonsgold and walshtools along with the cost hope this helps
👍👍👍👍
Плоскогубцы заводишь с другой стороны и упираешь в ригель, тогда прокат встает ровно
Nice
Thanks
I like pau this
Hello I have 1 question I want to make a gold rope chain and gold rope braclet and I dont know where you find the gold wire if you bought it from a website can you link it for me please.
Rio Grande always has good wire! I'm pretty sure they ship internationally, if you're not in the States.
www.eurofindings.com/
This is in the Uk London
دمت گرم پسر چقدر خوشگل شد ❤️❤️❤️❤️
Is there a way that I can buy a Cuban link necklace form you
So... that means you can make a SOLID link 30mm rope chain necklace right??
Yes I’m sure best to solder with lazar in the count of it being so small
@@MadeByHuss..... Huh??? Are you sayin' you can or you cannot??
Byron Brown oh 30 yes you can make any size you like but I don’t know how thick you will have to make the wire
@@MadeByHuss Maybe the wire should be 4mm thick to make solid links NOT hollow. So what will the cost be to make a 40 inch length 30mm wide (DIAMETER) rope chain necklace with Marine Stainless Steel 32mm Snap Shackle with Swivel Bail.... I don't have a way to attach a picture of to this reply
How to make the clasp of this bracelet?
Sorry I didn’t have time to film the lock
Can u show one wit you stampin it please
What you mean by stamping it I don’t get it
Mate check out dynamis jewlery he uses an rasier method than yourself when making the links using a drill using a simple bit of coiled wire watch one of his vids and youll see what im on about
I do watch his videos but I did not find the same chain Thanks
What is the price of that bracelet in dollars ???
It's not for sale this channel only shows how it's made Thanks for watching
Do you have a website?
Sorry no website I just show how it’s made for education and learning nothing for sale thanks for watching bless
Just awesome! Thank you for sharing you art! I have a jewellery channel. Take a look and leave your comment.
Thank you I will
Where can I buy it how much u sell it for
It’s not for sale I’m only showing how it’s made thank you
Make me a. 26”
Sorry Jeff this channel is only showing how it’s made thank you
How much is that..
It’s not for sale this channel only showing how it’s made Thanks
Gramm?
30 grams
How wide is the bracelet
not sure right now i think about 7-8mm
Sorry 9.5x4mm
Hii
Сколько стоит этот браслет?
It’s not for sale this channel only showing how it’s made thank you
@@MadeByHuss но всё-таки приблизительно какая была бы цена вашей работы очень любопытно?
@@user-we7dw5ox6s 3 долара за 1 грам с металом
Hi
Hello
Me you selvar bas laet
Me sodi
You movael nam bar me