Worked for me. That squeaking was getting on my damn nerves. That silicone wd-40 was about $8 at Walmart. Well worth it. Thanks cool guy with sunglasses 😎
Yes! Get the silicone lubricant only when it comes to your shocks. Regular wd 40 or any different lubricant that's not silicone specific or specifically for your shocks (anything similar) will destroy anything rubber near your shocks!
I think it sould be mentioned that this is a good way to 'care' for your vehicle as basic 'maintenance,' but won't substitute for a bad bushing or worn joint or tie rod end - which can cause a loss of steering if they fail.
My 10 tundra is making a low squeaking noise when I go through big bumps. My first thought was maybe the low ball joints or arm control. But not too long ago the truck was serviced and inspected at the shop, everything is good. I’m gonna give this a try tomorrow thanks.
The stabilizer bar that runs all the way across the vehicle usually has bushings on them too that’s my issue. They are new and I didn’t grease them. Maybe check it out
Vehicles without grease fittings! I have a 98 town car that has had this come and go. Bushings are spent obviously, I've packed grease etc. Thanks for the video. I know it is inevitable to replace the idler arm with new upgraded part with fittings, but I didn't use this product. Difintitely going to give this a shot. Seems what I've been doing is making it worse. Nothing more annoying than having all other issues on vehicle resolved but you have a noisy front end. If one doesn't do this themself for five hundred dollars it will cost a grand to have a shop replace bushings.
I had my rear rotors replaced last summer & this winter I hear squeaking periodically. Could this be due to sand/dirt ? They use sand instead of salt in my area as I live along a shoreline. Perhaps I need to hose any dirt away & spray. Thanks for sharing your video.
Just lubricate it, the cold is probably drying up the grease and causing it to squeak, if the noise comes back within a month then theres something actually wrong
I have 3” level with Motofab upper control arms that are new and trying to find where the squeak noise is coming from. I sprayed the wd40 silicone spray on the upper and lower control arm bushings and I still hear the noise. Possibly the upper control arm needs grease or the bushing went bad already less than a year
Folks, this is not WD- 40 penetrating oil per say, this is Silicone spray made by WD- 40, it will Lubricate and Extend the life of All Rubber like CV Joint Covers.....
Hey, gotta question for ya big dog. I just two inch spacers on the front of my truck to level it. Now it’s squeaking like you’re saying since adding them but it also sounds like it’s popping when I back up and turn the steering wheel either direction and only when backing. You have any knowledge on what it may be?
I have Spacers on my 2015 Toyota Tacoma. I’m having the same problem too when go off road the driving on the highway I hear like popping noises? Not sure if it’s the Spacers or control arms
Squeeking while going in reverse thats u-bolts. Told toyota they looked at me like i was crazy and tried to charge me $1800... got it done elsewhere for 600. Then Toyota had a recall... save your receipts. Got my money back lol.
When you lift or level the front end it Puts the entire front suspension under stress all your steering upper and lower control arms etc…….. keep everything lubed it should be fine! On the 7th day we must go off road
Not sure if your truck has torsion bar suspension on the front but that cracking/popping sound could be coming from where the front end of the torsion bar fits into the lower control arm "socket" . Some trucks seem to have noise issues from there due to the extreme torsional force put on that control arm "socket". Good luck.
Honest I was skeptical. I use the PB blaster silicone spray. I had a loud squeak driving even just getting in and out of my grand marquis was loud. Three months later still not squeaking… thank you
I just replaced the upper control arms and lower ball joints on my 06 Ford ranger and 4 months later I have a slight squeek when going over big speed bumps it makes no noise when I bounce the front end but while driving I hear it
Hi bro. Its really nice video bro. Thank you so much for that My Audi Q5 has squeaking noise from right upper, lower control arms i think. Does it WD Spray Lube works well with it?
If you do a change out on upper control arms make sure you change the bolts. To adjust your camber. On E bay There is a company. Called McBay performance the bolts have zert fittings that also helps with camber and helps to lube bushings
I did what ya said and it seem when you turn the steering wheel all the way to the right or to the left it still squeaks. I sprayed the spray on it and it still does the squeak. I'll bring it to the dealer where I bought it from and they'll take a look at it. I'm kinda passed. But at least I sprayed everything be for I ran out of the spray.
Car squeaks when in first gear going slow when I let off gas and lurches forward a bit... Any thoughts? Sometimes when going over bumps as well. Seems to be more of a sudden forward orstopping motion problem not up and down...
What do you recommend if this doesn't work. I've been spraying silicone on my truck after wd40 wasn't very affective. Changed the strut mount plate and the squeak is somewhat there after that but not as bad. Been going at this for like 3 months of squeaking maybe. Everytime it bounces or if I rock it side to side I can hear it creakin lol
@@Derec Ball joints looked fine, but maybe that'll be the first replacement. Creaking seems to come and go. Probably a whole strut assembly will do lol Thanks for the tip though
😂😂🤣🤣🤣 I cant even handle this guy! Only spray every few weeks! Fixes the problem so you dont have to replace your bushings😳! This guy just saved my truck lmfao!
@FernExtra FernExtra I can't tell you how much installation is but I will say I have rough country shocks on the rear of my truck, had the truck about a year but idk how long they been on because I got it from a dealer who got it from a guy but they do have a little rust, nothing serious but they get pounded on quite a bit going through my weekend backwoods trail, I have 35s and ride quality decent, can get bouncy on uneven roads for passengers but that's what happens when you lift a vehicle. Nothing rides true, so if your looking for shocks on RCX, I say get their newer equipment because mine is like their 2nd gen shocks, the N2's I hear are pretty good but overall Fox Shocks are the go to if you got your pockets right. Hope that helps
According to the website WD40 is safe on rubber. The only materials which are mentioned as being affected are polycarbonate and clear polystyrene. However since it is a petoleum based product I would agree wth Alex Rogers and avoid contact with natural rubber.
My car squeaked like crazy come to find out it was my ball joint and sucks cause my tire snapped off broke everything so make sure it aint the ball joints axel I just put in snapped off with tie rods
Where exactly are you spraying. I have a squeaking near my front left tire. My coworker told me its my strut. Will a spray work on the strut? I dont know anything about cars. Guess ill buy this one and the one for rubber the AT-
I just got a greese gun greese the ball joints and all the rubber joints and still squeaks and then I seen your video. I will try it and let ya know how it goes. It squeakes turn up and down and it's getting loader. So I'll go get this can of spray and try it. I'll let ya know how it goes. I'll try to do a video of my squeak before and after test and show ha what I'm talking about..till then thank for the information.
I have a 2010 kia forte at about 170,000 miles runs great still surprisingly and body wise too, but squeaks at every bump and dip in the road even when releasing the break would this be the same issue for me?
My mechanic installed new control arms from Autozone on my Corolla that squeaked immediately and non-stop. I sprayed the bushings with some silicone spray, and the noise seemed to go away for a little while, but came right back after a few weeks.
I know this was 2 weeks ago but squeaking coming from new control arms are acceptable if you did not put grease in between the bushing and mounting points. Itll wear down and stop being noisy. Mounting them without grease is better in my opinion. It allows the bushings to do their job better. The grease will cause the bushing to slip instead of grab onto the metal like its supposed to.
David Hernandez could jack up the truck to open the leaf springs and spray white lithium grease in between all the sections! I think with metal on metal you want a thicker product, like white lithium or even ball joint grease with a needle on the end of a grease gun and pump the grease in!
I just happen to have a can of that. And my front end squeaks pretty loud when I go over a speed bump or coming in or out of a drive way. I have 3 nasty speed bumps where I live that I have to drive over everyday. They aren’t the wide flat speed bumps they are raised and you have to almost come to a complete stop then drive slow. I have a 2018 it shouldn’t be making noise. I blame the speed bumps! I will try this tomorrow morning thx for the tips!
Dude u r pretty clever can u find a solution for my Ford Fusion trunk squeak? Someone told me to use CRC White Lithium Grease is that like what u got there? I’m so frustrated!!
7878 stew the noise would go away immediately and stayed away for a month. I replaced the part when my wife got really mad at me cause after a month it would come back. Still it really helped out to temporarily rid of the problem till I had the money and time to replace the part on my wife’s car.
7878 stew I really sprayed covered the inside of the joint between the crack and sprayed a lot into it was literally dripping and flowing after I was done. Your rubber might be too far gone as well and just need replaced too
Thanks a lot bro. Couldn’t find the one you recommended at the Walmart I was at so I got the liquid wrench silicone spray and it worked just as good!! 💯💯💯
I have some squeaks when driving over bumpy road but not over speed bumps. I ordered this WD40 Sillicone Special and I hope it will fix it. It is not too bad and it almost fully dissapear when I drive for more than 10 minutes but Id prefer it without any squeaks at all 😅
If you own a Dodge 1500 pickup like me, first check the tension in the spare tire cable. It can come lose and result in large squeaking noises as tire rubs on bottom of bed.
I hear squeaking noises when I drive by 2008 ford focus. It's very hard to hear, but it's mostly when I drive over rough road and once I heard it going over some train tracks.
Worked for me. That squeaking was getting on my damn nerves. That silicone wd-40 was about $8 at Walmart. Well worth it. Thanks cool guy with sunglasses 😎
Fuck 8$ eh here in ontario i just payed 20😭
@@SBS420.still no squeak ?
@@juliomoreno5370 eventually comes back but couple little sprays lasts bout 2-3 weeks
Hell yeah guys good job
Yes! Get the silicone lubricant only when it comes to your shocks. Regular wd 40 or any different lubricant that's not silicone specific or specifically for your shocks (anything similar) will destroy anything rubber near your shocks!
I think it sould be mentioned that this is a good way to 'care' for your vehicle as basic 'maintenance,' but won't substitute for a bad bushing or worn joint or tie rod end - which can cause a loss of steering if they fail.
Most ball joints are unservicable today and only require a little elbow grease
This might take away the symtoms for awhile but I wouldn't recommend that for worn out pieces in the car.
Replace them and be on the safe side.
My 10 tundra is making a low squeaking noise when I go through big bumps. My first thought was maybe the low ball joints or arm control. But not too long ago the truck was serviced and inspected at the shop, everything is good. I’m gonna give this a try tomorrow thanks.
my exact issue too brother, just replace ball joints & still hearing some squeaks, going try this as well
The stabilizer bar that runs all the way across the vehicle usually has bushings on them too that’s my issue. They are new and I didn’t grease them. Maybe check it out
if they put grease fitting on all your suspension like they used too you wouldnt have to do this
Agreed, the dealership wants people to replace more parts
"You only need to do every few weeks because, you know, it actually solves the problem" LMAO
Depends if you reside in an area with torrential downpour
🤣🤣
I was dying too bro
Bro, you been alive since 1966!? That’s fuckn crazy
@@NikoTheDad 😂😂
This works for lifted and non lifted trucks. That lube is good stuff. WD40 wow
Yes, bumps in the road are exclusive to Pennsylvania
Thanks cuhhh my trokita good now
Awebo cuhhh
Ver Ver Welcome
@@Derec Do you still have that Silverado?
I must have missed a spot I sprayed it coming from right side only
Si quema on no quema cuhh
This fixed the squealing on my 2000 Silverado thanks that was the one thing that bugged me about my truck
You are welcome, keep on trucking
Vehicles without grease fittings! I have a 98 town car that has had this come and go. Bushings are spent obviously, I've packed grease etc. Thanks for the video. I know it is inevitable to replace the idler arm with new upgraded part with fittings, but I didn't use this product. Difintitely going to give this a shot. Seems what I've been doing is making it worse. Nothing more annoying than having all other issues on vehicle resolved but you have a noisy front end. If one doesn't do this themself for five hundred dollars it will cost a grand to have a shop replace bushings.
Roger that, best of luck to you
Man, my truck is squeaking like crazy. I’m about to go to the store and get a can of this stuff. Thanks for the video.
Yes broo smh my 04 1500 been squeaking like crazy can't even drive with my windows down 😭
😂😂me too omw too walmart righy
I had my rear rotors replaced last summer & this winter I hear squeaking periodically. Could this be due to sand/dirt ? They use sand instead of salt in my area as I live along a shoreline. Perhaps I need to hose any dirt away & spray. Thanks for sharing your video.
Just lubricate it, the cold is probably drying up the grease and causing it to squeak, if the noise comes back within a month then theres something actually wrong
The sweater/shade combo.. nice
boom boom thank you
I have 3” level with Motofab upper control arms that are new and trying to find where the squeak noise is coming from. I sprayed the wd40 silicone spray on the upper and lower control arm bushings and I still hear the noise. Possibly the upper control arm needs grease or the bushing went bad already less than a year
Folks, this is not WD- 40 penetrating oil per say, this is Silicone spray made by WD- 40, it will Lubricate and Extend the life of All Rubber like CV Joint Covers.....
thank you for clarifying
@@Derec wher do I buy this ?
@@lookatmelookatme8974 walmart, home depot
Those glasses 🤣🤣🤣🤣
randy beard its just wd 40!
Hey, gotta question for ya big dog. I just two inch spacers on the front of my truck to level it. Now it’s squeaking like you’re saying since adding them but it also sounds like it’s popping when I back up and turn the steering wheel either direction and only when backing. You have any knowledge on what it may be?
I have Spacers on my 2015 Toyota Tacoma. I’m having the same problem too when go off road the driving on the highway I hear like popping noises? Not sure if it’s the Spacers or control arms
Squeeking while going in reverse thats u-bolts. Told toyota they looked at me like i was crazy and tried to charge me $1800... got it done elsewhere for 600. Then Toyota had a recall... save your receipts. Got my money back lol.
The increased track width from the spacers may be causing the tire to rub against the fender while turning
When you lift or level the front end it Puts the entire front suspension under stress all your steering upper and lower control arms etc…….. keep everything lubed it should be fine!
On the 7th day we must go off road
Not sure if your truck has torsion bar suspension on the front but that cracking/popping sound could be coming from where the front end of the torsion bar fits into the lower control arm "socket" . Some trucks seem to have noise issues from there due to the extreme torsional force put on that control arm "socket". Good luck.
Thanks guy with the cool glasses 😎 I'll try that with my car!
His words had passion. Im trying this’
Think this would work for my traction bars ? They been squeaky af
Good video. My upper control arms are the ones that squeak, and creak like on old ship too. I use Blaster brand silicone spray. Would that be as good?
Nice truck and wheels bruv!
bro i litterally just did this and it helped
I just tried this and it worked very well. Thanks for the video!
You are welcome, I am glad I could help
Honest I was skeptical. I use the PB blaster silicone spray. I had a loud squeak driving even just getting in and out of my grand marquis was loud. Three months later still not squeaking… thank you
I just replaced the upper control arms and lower ball joints on my 06 Ford ranger and 4 months later I have a slight squeek when going over big speed bumps it makes no noise when I bounce the front end but while driving I hear it
Thanks young one..I fixed my problem great video..
Hi bro.
Its really nice video bro. Thank you so much for that
My Audi Q5 has squeaking noise from right upper, lower control arms i think. Does it WD Spray Lube works well with it?
will permatex silicone or blaster silicone work the same ?? does it have to be wd40
My front right on my dakota squeaks a bunch, is their anywhere else you would recommend spraying for that?
the lower control arms as well or get all new bushings
just replace the suspension.
If you do a change out on upper control arms make sure you change the bolts. To adjust your camber. On E bay There is a company. Called McBay performance the bolts have zert fittings that also helps with camber and helps to lube bushings
Thanks man. I’m going to try this. Been looking for something like this video.
So would this work on Ball Joints and Struts ?
Wondering if you've look at fluidfilm? I've used it on a lot of things on my jeep to get rid of squeaks.
Less than $10 it’s worth trying and seeing if it works I will go to Walmart and get it now. Thanks. I’ll let you know how it goes.
Highly appreciate you for this video. God blessed you.
I did what ya said and it seem when you turn the steering wheel all the way to the right or to the left it still squeaks. I sprayed the spray on it and it still does the squeak. I'll bring it to the dealer where I bought it from and they'll take a look at it. I'm kinda passed. But at least I sprayed everything be for I ran out of the spray.
Bro I don’t know how to thank you I was about to go crazy that thing really work 👍👍👍
Definitely trying this today my Danger is annoying me lol ❤
Will PB Blaster silicone lubricant work??
Great solution! Will this work for my shocks and struts in a 2013 hyundai elantra?
can i use the ordinary wd-40 and not the silicone specialist?
This is great, I will try it out on my civic, do you got a sedan for to see exactly where shall I put that?
Car squeaks when in first gear going slow when I let off gas and lurches forward a bit... Any thoughts? Sometimes when going over bumps as well. Seems to be more of a sudden forward orstopping motion problem not up and down...
I had to tighten a rear shock to fix a sound once too
Grease your drivetrain and if that doesn’t do it might be transmission slow death
Centre bearing or u joints on driveshaft be worth a look
Does the WD-40 White lithium grease work aswell?
I sprade the hole suspion to make my 04 ram 1500 down with lithium grease in a can..and it still sqeeks any suggestions??
What do you recommend if this doesn't work. I've been spraying silicone on my truck after wd40 wasn't very affective. Changed the strut mount plate and the squeak is somewhat there after that but not as bad. Been going at this for like 3 months of squeaking maybe. Everytime it bounces or if I rock it side to side I can hear it creakin lol
May potentially please be a ball joint replacement or so help me a strut mount bolt
@@Derec Ball joints looked fine, but maybe that'll be the first replacement. Creaking seems to come and go. Probably a whole strut assembly will do lol Thanks for the tip though
Thanks for saving me a lot of money!!
Great worked for me thanks man
What do you do on the weekends?
fishing
Tf kind of question is that
Rude Rocky hey man, ntstudio28 could just be trying to make a friend... jeez.... 😆
2Dolla bro That’s what bitches are for.. don’t be askin dudes 🤦🏾♂️
Do you have any tips for squeaks when you press on the gas ????
May relate to the same suspension components
Great looking truck !!
Is the new bottle of the wd40 specialist silicone the same as the old bottle? The new one says quick drying
The old cans may not posses the quick drying feature apparatus?
It does man !! It works . Great video ..thank you
I just replaced upper and lower Mevotech control arms with brand new bushings with AC Delco and coil spring and it still squeezing
😂😂🤣🤣🤣 I cant even handle this guy! Only spray every few weeks! Fixes the problem so you dont have to replace your bushings😳! This guy just saved my truck lmfao!
My lifted 2013 Silverado keeps on squeaking over bumpy roads, do you think your method will work?
otherwise a shock may be loose or need to be replaced
@@Derec How do you think rough country shocks are and around how much for a mechanic's work
@FernExtra FernExtra I can't tell you how much installation is but I will say I have rough country shocks on the rear of my truck, had the truck about a year but idk how long they been on because I got it from a dealer who got it from a guy but they do have a little rust, nothing serious but they get pounded on quite a bit going through my weekend backwoods trail, I have 35s and ride quality decent, can get bouncy on uneven roads for passengers but that's what happens when you lift a vehicle. Nothing rides true, so if your looking for shocks on RCX, I say get their newer equipment because mine is like their 2nd gen shocks, the N2's I hear are pretty good but overall Fox Shocks are the go to if you got your pockets right. Hope that helps
@@fern13nando76 I have the n2s and they are not that great on my 6inch 4wd Silverado go with bilstein or fox
one question? Does WD 40 dry out or wear rubber over time? Thanks, I love the stuff btw.
According to the website WD40 is safe on rubber.
The only materials which are mentioned as being affected are
polycarbonate and clear polystyrene. However since it is a petoleum
based product I would agree wth Alex Rogers and avoid contact with
natural rubber.
Yes, petroleum products will erode rubber. Use silicone.
My car squeaked like crazy come to find out it was my ball joint and sucks cause my tire snapped off broke everything so make sure it aint the ball joints axel I just put in snapped off with tie rods
Upgrading to serviceable ball joints will extend the life
My Nissan Titan 05 is doing the same only when I do turns or go over bumps or slow driving I hope this fix the problem
Where exactly are you spraying.
I have a squeaking near my front left tire.
My coworker told me its my strut. Will a spray work on the strut?
I dont know anything about cars.
Guess ill buy this one and the one for rubber the AT-
Ismael Ortiz open you hood and spray the bushing on the top for your strut, at-205 will work alot better, amazon sells it,
the noise could be the strut or shock
I had the same problem and it was the lower ball joint by the front left tire
My bro,the hack is awesome
Thanks bro!! just did this to my car, except I used the PB blaster version and the annoying Squeak went away. 🎉
I just got a greese gun greese the ball joints and all the rubber joints and still squeaks and then I seen your video. I will try it and let ya know how it goes. It squeakes turn up and down and it's getting loader. So I'll go get this can of spray and try it. I'll let ya know how it goes. I'll try to do a video of my squeak before and after test and show ha what I'm talking about..till then thank for the information.
you could also use at-205 pour the liquid in a bottle according to scotty kilmer
Did that, noise came back 2 days after
The method I explained is more efficient
nice video. I think white lithium grease will last a lot longer. I'm gonna try that.
thank you
I agree too
Lithium is not recommended for rubber ...
And alot of lithium does not Penetrate well.
Thanks I will try this on my 2004 Escalade, I hear that squeaking coming from rear right wheel.
Riding in style
Maybe u need break pads
I have a 2010 kia forte at about 170,000 miles runs great still surprisingly and body wise too, but squeaks at every bump and dip in the road even when releasing the break would this be the same issue for me?
How will you know if this thing needs to replace?
Potentially splitting rubber or severe rust
Do I have the same problem: I heard a squeezing sound only when I slowly pressing brakes? Can anyone advice. Thanks.
Why not just get some aftermarket upper control arms made for lifted trucks?
Yea, don't forget the back Leaf Springs. More often happens back there. Especially backing up.
have not had a problem with the leaf springs so far, thanks for letting me know
Yeah, leaf springs get noisy.
Can it be regular Wd40?
Regular may have an opposite effect on rubber?
My mechanic installed new control arms from Autozone on my Corolla that squeaked immediately and non-stop. I sprayed the bushings with some silicone spray, and the noise seemed to go away for a little while, but came right back after a few weeks.
thanks for watching but new control arms should not squeak either
I know this was 2 weeks ago but squeaking coming from new control arms are acceptable if you did not put grease in between the bushing and mounting points. Itll wear down and stop being noisy. Mounting them without grease is better in my opinion. It allows the bushings to do their job better. The grease will cause the bushing to slip instead of grab onto the metal like its supposed to.
😂treat the symptoms not the problem
That’s actually smart thanks
He already said that the lift increases the angle on the control arms and requires extra lubricant. Problem > Solution. What more do you want? 🤣
Does this work on suv?
Be care full because if the tour breaks are squeaking you just need to replace them but driving without replacing them will end up costing you more
Of course corrosion and rust can be destructive beyond belief
So I just put straight silicone spray and it only last couple days. WD is probably the way to go
I have a 6in lift and I am getting squeaking noise when I go on reverse. You think this might help?
Yes, the noise may also be the rear shock
I don't think this is where my noise is coming from but when I find it this stuff might help
What about the leaf springs. Tacoma’s have a bit of a squeak could this work?
I would give it a try
David Hernandez could jack up the truck to open the leaf springs and spray white lithium grease in between all the sections! I think with metal on metal you want a thicker product, like white lithium or even ball joint grease with a needle on the end of a grease gun and pump the grease in!
I just happen to have a can of that. And my front end squeaks pretty loud when I go over a speed bump or coming in or out of a drive way. I have 3 nasty speed bumps where I live that I have to drive over everyday. They aren’t the wide flat speed bumps they are raised and you have to almost come to a complete stop then drive slow. I have a 2018 it shouldn’t be making noise. I blame the speed bumps! I will try this tomorrow morning thx for the tips!
You are welcome, the speed bumps are more costly than what they are trying to apprehend
This kid went to A and M you can spot an Aggie a mile away. Gig em boy! And good luck you gonna need it!
Dude u r pretty clever can u find a solution for my Ford Fusion trunk squeak? Someone told me to use CRC White Lithium Grease is that like what u got there? I’m so frustrated!!
R Rodrigo 😂😂😂😂 I got about the same problem with my 2013 Ford Fusion! To much noises!
Plus my turbo hose broken!!!
I used silicon grease
White lithium grease in a spray can about 10 bucks. Use where rubber is sqeaking. Bushings etc.
Saved me a lot of stress and time and frustration THANK YOU
Did it work?
Yes it worked really well. I used pb blaster but basically the same thing. I soaked my wife’s car bushings with it and no more noise.
You are very welcome, have a great day by the way
7878 stew the noise would go away immediately and stayed away for a month. I replaced the part when my wife got really mad at me cause after a month it would come back. Still it really helped out to temporarily rid of the problem till I had the money and time to replace the part on my wife’s car.
7878 stew I really sprayed covered the inside of the joint between the crack and sprayed a lot into it was literally dripping and flowing after I was done. Your rubber might be too far gone as well and just need replaced too
can i use the silicon spray on my wiper blade?
yea people have done that before
@@Derec People have done a lot of stupid things before, so that isn't much of an answer.
even for u joint ?
Thanks for the tip !!!! It works!
Thanks a lot bro. Couldn’t find the one you recommended at the Walmart I was at so I got the liquid wrench silicone spray and it worked just as good!! 💯💯💯
You're welcome! Always nice to find solutions at home
I have same issue can it be applied directly on sprut cuz i think that's what is causing squeaking for me.
Thanks
Ismael Ortiz yes. I sprayed it on everything under there that look like it could squeak. Last long too
Thank you for the information!!!!
I have some squeaks when driving over bumpy road but not over speed bumps. I ordered this WD40 Sillicone Special and I hope it will fix it. It is not too bad and it almost fully dissapear when I drive for more than 10 minutes but Id prefer it without any squeaks at all 😅
Did it help? I have the same issue, my suspensions loud though usually when leaving the parking lot after work.
I can smell the WD-40 through the video
Sharing is caring?
😂
🤣😂
Hahahahaha right
They make scented wd-40
its only make smooth to the gap of problem, the basic trouble still there, no sound not mean no trouble.
Add a little life to the bushings
Appreciate cha youngster ty..
If you own a Dodge 1500 pickup like me, first check the tension in the spare tire cable. It can come lose and result in large squeaking noises as tire rubs on bottom of bed.
Plus the spare tires hold grime salt rust sludge
Awesome, I have been having this issue. Going to buy some right now !!!
You are welcome, make sure to shop local farm produce
Just put in new suspension and it started squeaking almost immediately 😐 I'ma have to try this
I hear squeaking noises when I drive by 2008 ford focus. It's very hard to hear, but it's mostly when I drive over rough road and once I heard it going over some train tracks.
This method could be solve to all your frustration
Will it work on a 98 civic?
Where can i buy this?
Local small business hardware store
Yay this guy is great.
Thank you