The Traxxas Maxx body with a little modding looks and performs amazing. No more dirt being sprayed all over the electronics, no more parachute BS, skid plate options , no more limited tire clearance.
I just want to say thank you Mr Duperbash because of your video's i have a Senton 3s but more importantly i have my new fav Typhon Truggy just took it out sunday and had a blast.
@@richduperbash2966 Actually just bought a senton, should be here tomorrow. Had one before but I sold it and got out of bashing and into crawlers but have been obsessing over a senton recently, cant wait!
What do you do to keep from blowing driveshafts? I’m stock system with new clutch at factory setting’s and I eat them and the cvd like candy. To the point I don’t run my armma anymore
Hey Mike. I've heard similar situations and feedback before. The first thing that comes to mind is an overly tight or faulty slipper assembly. I usually set mine 1/2 turn out from snug (which is tighter than the manual recommends) but have had great luck with it for years. Bad or failing bearings can also put crazy strain on the shafts just like large wheels or landing on throttle can, or heavy diff fluids. My guess is your slipper isn't slipping properly for whatever reason. I've seen springs lock up in the assembly among other weird instances. I should mention I'm using a metal spur (57T 4s slipper assembly) in this rig. I've had to disassemble a few of my slippers to troubleshoot stuff, but generally have good luck with my standard 3s slippers. I've also had to add threadlock on the adjustment screw to some of them that kept coming loose. Hope you get it sorted. It's super frustrating breaking the same parts repeatedly. 🍻
Thanks so much Brother 🤗. I love both rigs, but honestly have more raw fun driving my Senton. Thing is like a tank and always makes me bust up the way she flips and rolls 😂
Dude M2C stole my comment. Awesome didn't have a enough! Reverse! Frontflip. You are the master 🙌 we could all learn and have learned alot from watching your vids. Piece... .... late
That's so AWESOME that a Premium Band like M2C is making these beautiful designed parts for even the cheaper 3S rigs! Unbelievable what the rigs can take and how it handles with these mods. 👍👍👍
Couldn't agree with you more Kimberly 😍. So grateful Mitch and Avery took on the 3s line. These hex adapters are simply gorgeous 👀. The motor plate and chassis support system has exceeded my expectations. It truly makes the truck stronger no question. They're so talented at their craft it's amazing 😍
You can make any truck look good bro🤙 -What batt are you running 3or 4s? The Senton, BigRock and Mojave seem to be the best bargain out of the arrma range💙👍
Crazy bash session! Definitely in my opinion the arrma 3s big rock and senton are the most durable 1/10 scale cars! I also love the new maxx but it has more weakness in durability section and the big rock handles better and the maxx electronics are kinda Crappy. But the maxx body is just eye catching.
That Senton is an Animal Rich!! Another Great upgrade from M2C!! Those Proline wheels are beefy for short course. The Buggy wheels are still my favorite!! The Senton on 4s just rips. The stalled backflips off the ramp were unreal !!Short course Madness at it's Best. All Hail the Bash King!! Stay safe Bro and bash on from Colorado!!!
Thanks so much Ervin 😜. M2C is killing it with all these incredible options!!!! The tires felt awesome, especially with the offset from the adapters👌. Love my Duratrax lockups buggy wheels on her too, but these offer better overall balance and control both on the ground and in the air. Truly appreciate the kind words Brother!!!! 🚀🚀😎💪👊👊
I love seeing videos on the 3s rigs especially for those that can't afford the more expensive 6-8s rigs. I love my wifes 3s senton! It definitely takes a beating!
Thanks Justin 🤗. The 3s rigs are an incredible value, especially for their durability and performance potential 😍. Bottom line . .. they're super fun to rip around, easily as fun as the 6 or 8s line, and don't cost nearly as much time or money to own and maintain. Appreciate your comment Brother 🍻
Thank you so much dear Brother 😍. I honestly think the Senton takes more punishment than any of my rigs 👀. Such a joy to rip around, especially on 4s. Loving these new SC tires 😍. Hats off to Avery for another brilliant design with these hex adapters 👌👌😎💪👊👊
Hi Rich brother 👍 I think your the only one who can jump a Senton like that 😱 awesome upgrades and love the wheels 🥰 really enjoyed every minute of this Bashing season brother 👍😎😁👍
Thanks so much Tony 😜. Definitely an adventure hittingl bigger jumps with the Senton 😱. Never know what'll happen depending on the wind. Props to Avery with M2C for another awesome 7075 upgrade option. Hope all is well without too much rain there Brother 🤗🍻😎💪👊👊
Thank you dear Brother 🤗. The Senton is such pure fun 😍. Wanted to take here to the skatepark again, but ran out of time. Definitely taking her back next outing 🍻😎💪👊👊
“Alright guys enough gibberish and babbling..” but Rich dude your gibberish and babbling is so valuable to those of us taking the shortcut to these ruggedized beasts and saving coin along the way thanks to you sharing your knowledge and experience gained over the years. Thank you brother 🙏🏼🙏🏼🙏🏼
You have so much control on 4s!! I love the whole 3s lineup they are all fun in a different way!! 💯💯 You make amazing videos that inspire people in the rc community!! I can say that you have inspired me to build a ramp and start sending it!!!! Hope your back gets better so you can keep making great content!! 💯👏🔥💯👍
Awesome bash!!! I love the 3s line! you really put the beatdown on that one!! Incredible front flip at 6:45!! thanks for posting and abusing the parts!
Thanks so much Brother Avery 😜. The 3s line is so capable and such pure RC FUN 😍. You friggin nailed it with this innovative design my friend. Love the offset and so easy to mount up 👌. The looks factor is off the charts too 😱. Function and insane durability aside, I could see the crawler crowd wanting these for the scale appearance. They're absolutely gorgeous!!!! Thanks for another Epic upgrade option 🍻😎💪👊👊
@@richduperbash2966 ohh man that's not good 😐 hope you're better soon,I know the feeling lifting fridges and washing machines by myself for a living (house moves) back in the day literally ruined my back from that 😑,you definitely were the first on RUclips to inspire me into the hobby this year and I'm now obsessed with the hobby 😀 didn't even know you had a senton though,I gotta get out there more though get some videos uploaded 😀
@@differrc4049 ohhh damn 👀. Moving furniture and appliances is no joke. I was a furniture loader decades ago (sofa sleepers, recliners...etc) and worked in lumber and building materials way back for Home Depot. Too easy to jack the back twisting and torquing 😝
@@richduperbash2966 dahm brother home depot is like our B&Q 😂 propper grafting days lol...are you doing the EAST TACTICS FRONTIE? Plan to do it once our weather here gets better
That is a nice lookin truck Rich!! Those wheels set it off and perform awesome. Kick azz session with the jumps off the rock pile, keep on doing what you do brotha. Great stuff!! Peace man
Thanks so much Brother 😜. Loving these wheels and setup 😍. Think they're about perfect for this platform without being too big or adding too much weight. Great balance and stance with these adapters 👌. Truly appreciate the kind words my friend 😎💪👊👊
Luv the videos bro.plese tell me how i can get a set of those wheel adapters.i have a senton v3 3s with proline wheels and just keeps chewin up adapters.help !!!!!
Thanks Zane 🤗. Hopefully, these wheel adapters will go into production and be available on the M2C website soon. The plastic Raid hexes are just weak 😝. Here's a link to the website. My guess is a couple weeks, but I'm not sure. Mitch and Avery have been busy as heck working on several new designs. 🍻😎💪👊👊m2cracing.net/
Wow Rich! The SCT badlands give the Senton some sweet air control! Just love how your sending this rig. Always love the 3s Senton 🤩 Wheel adapters look pretty sweet too 👍
Thanks so much Brother Aaron 😜!!!! These "MX" version SC Badlands are frigging awesome 😱. The size, weight, and offset feel perfect with the M2C prototype adapters 👌. Totally changed the handling and overall stability. Big props to Avery for another sweet design. 🍻😎💪👊👊
Super nice rig❤.. you've got this sorted. I ordered titanium hinge pins and holders, but am now wondering after watching you tag the big boulder.. if I have ti pins installed and hit that same way will my chassis crack instead of the pin giving out?
Thanks Brother 👊. It's tough to say if you run titanium holders and pins if the chassis would bear the brunt in a violent hit. A really bent stock pin can stress the chassis too. Most upgrades are worth trying so long as they don't add excessive weight 🍻
Amazing test on the M2C wheel adapters bro!💪Avery is on top of the game with his designs!😍Watching this truck never gets old! It just hovers across the ground bouncing from tire to tire!🤣The Proline tires look great on it! Killer rips and ramp hits! Such a fun little truck I'm sure! Beautiful sunset bash at the end!😎💪👊👊🤙
Thanks so much Brother Eric 😜. Man these Badlands MX SC tires haul ass 😱😂. Definitely feel more planted than the Duratrax Lockups buggy wheels I was running. Loving the fitment and offset of these beautiful adapters Avery designed 🥰🥰. Perfect match up with the wheels 👌. The Senton is like a Jesus lizard running across the water 😂. So frigging hilarious to watch it skip around as it picks up steam. Truly one of the funnest and most durable in the fleet 💪. Nice to give my back a rest from loading the 8s beasts for a day too 😂🍻🤙🤙😎💪👊👊
Nice work Rich. I don't understand why I see so many aftermarket options for Arrma 3S hubs when the stock Typhon 3S 17mm hubs are clearly the best, lightest, cheapest and most durable option. Maybe it's spacing.
Thanks Brother 🤗. I'm 100% happy with my stock Typhon 3s hexs paired with 1/2" offset rims. Still running the previous style solid F11 rims (17mm hex) with original Badlands 2.8 I glued on. This is another option for guys running the Senton, Granite, BRCC, or Vorteks when using the Raid style rims. Unfortunately, I think Proline is phasing out many of their older solid rim options. 🍻
Awesome bash Rich! 👌 The Senton is the toughest of the Arrma 3s line no doubt. Pity the 3s line just chew through parts quicker then a kid with a bag of sweets. Bash, wrench repeat! 🔧
Thanks so much Brother 😜. I absolutely love this rig 😍. Parts are fairly cheap and easy to replace. I threw in the towel and dropped on a Tbone Senton front bumper for next time 😂
Here's the link to my HD ramp build. I would've done a step by step how to, but it was raging hot mid summer and I had to bang it out 🍻ruclips.net/video/UMoMtseZABU/видео.html
Thanks Harry 🤗. Brother I have so much raw fun driving this little green monster 😱🤣🤣. I will say these Badlands MX SC wheels are fantastic and the offset with these M2C adapters feels perfect!!!! Definitely helps overall stability and control. 😎💪👊👊
Hello Rich. How you doing. I just need to ask please. Are those pro line tires belted or not? I'm completely rebuilding my arrma senton Mega and what I need is set of tip top tires. I got Louise set but they are to soft and ballooning too much. Thanks for your help.
Doing well my friend 🤗. These Badlands MX SC tires aren't belted, but I'm not seeing any major ballooning. The foams feel quite firm and the rubber thick. We'll see how they hold over time, but I'm loving them. 😎💪👊👊
Those adapters are nice!! Gtta love the Senton 3s!!..I broke my front skid before also and lost my hing pin brace..Good idea with the tape to hold in place
Thanks Brother 👊. I started putting Gorilla tape under the skid (on the chassis) up over the front plate because mine went flying off one day 😂. As simple as it is, it's actually worked. I finally mounted up a Tbone bumper right after this session. 🍻😎💪👊👊
Do it Kizzel 😱!!!! The Senton 3s is a Blast 😍. Super fun and easy to wrench on. I think you'll dig it Brother. Hit me up anytime if you questions about it. Very modular design and takes a serious beating with the big bumpers, nerf bars, and SCT body 🍻😎💪👊👊
Great vid. As always. I grew up in Rocklin. I have Granite BLX with the M2C upgrades, and two 6s Arma Kratons. I would like to come to Rocklin again and do some bashing. Is there a good place to go?
Thanks Brother 🤗. Great choice of rigs 👍. This was out at Folsom Lake. Tons of space and terrain to rip around with the crazy low water levels. Very few visitors with almost zero boater traffic. There's also a nice gravel mound area behind Walgreens off 12 Bridges and 65 area. Unfortunately, construction projects have eliminated some of the better local spots. 🍻
Good to see that little ripper out there rippin and jumpin Bro Rich! What a hauling ass screamer LoL 🤣. She's a Fun one for sure man! What an upgrade from M2C with those aluminum hex adapter. Some innovative thinker and constant innovation over there at M2C. This is a big one over the plastic shit LoL 🤣. How the hell you keep her landing like a Cat off the ramp with the parachuting body and strong wind against you is beyond me 👀😳😍😂. I forgot you're Rich Duperbash! LoL 🤣. Another awesome session Bro!
Thanks so much Brother Chris 😜!!!! She's a little wild animal on 4s no doubt 😱😂. Gotta say these Badlands MX SC tires are Killer!!!! Felt perfect on the green monster. Especially with the offset of these beautiful, direct fit 7075 adapters 😍. I can't run plastic fantastic with the raid hexes. Been there, done that 🤣. So stoked Mitch and Avery are pumping out these incredible options!!!! The Senton took another flogging in stride 👍. She's a bit of a gamble off the ramp with the wind and her big body 😱🚀🚀. I think the wheels were a big help though. Truly appreciate the kind words Brother!!!! 🍻🤙🤙😎💪👊👊
Thanks so much Corey 😜. I'm running a 20T Robinson Racing Extra Hard 0.8 mod pinion with the 4s metal slipper gear assembly. I set my slipper about 1/2 turn out from fully snugged. The standard plastic spur works fine, but I like the added durability of the steel option. 😎💪👊👊
I've had great luck simply adding threadlock to the back end of the adjustment screw 👍. I use Loctite blue 242 medium strength and let it set atleast 24 hours. 😎💪👊👊
Yes indeed 😍. So excited about what M2C is doing lately 😱. They can literally make about anything they imagine and have the creativity, equipment, and CNC mastery to do it perfectly 👌
Thanks for sharing all your knowledge! Love the 3s line. My son (6) can't break his bigrock😄. Like to see the Crusher again. My outcast has Crusher chassis, and its the perfect length (you said that😅). Mabye test the new m2c overkill driveshafts and show us the crusher again 😎 (If its alive). Big support from Norway!
Thanks Henning 🤗. So awesome to hear about your son's BRCC 😍. My Crusher is a bare chassis at the moment. I might convert my RTR K8s with it 🤔. Definitely a perfect length for all around bashing 🥰🥰. Definitely miss running her. The Overkill driveshafts have done Fantastic 💪. Been testing them with my 08s, just haven't put a vid together yet. Thanks for the suggestion and happy bashing my friend!!! 🍻😎💪👊👊
Hey rich I just got a losi DB pro ordered, it’d be interesting to see what you could do with it! I know it’s not necessarily designed for hard bashing but guys say they’re super tough. Im sure you could make it a monster
Beast of a little truck, epic run and sweet upgrade on the wheels brother big up m2c they are killing it with the upgrades right now with the xmaxx stuff too 👍😉👊
Thanks so much Al 🤗. Mitch and Avery are on fire with all these new options 😱. So awesome to see their CNC mastery and creative designs coming together!!!! They're changing the bash game one bit at a time 🍻
@@richduperbash2966 I know how much hard work goes into what they do as I use the same machines as they do at work but I work with plastic not aluminium
I'm super jealous you managed to run that 4s on stock driveshafts. I kill those so quickly on the big rock, but I've not taken an arm off yet in a crash. I did manage to mod the upgraded CVD axels from the outcast 4s which are slightly bigger than the uprated ones for the 3s stuff by shortening them and widening out the axel hubs with a dremel, so far they're proven pretty tough. My GPM steering blocks died, totally came in half where the inner bearing sits 😂 You have some really nice bash spots there man 👍
@@justinblackwell1617 yeah even on 3s I kill the basic driveshafts. The plastic diffs are rubbish and they should've shipped them with the cnc metal ones really.
Thanks Dan 🤗. Man that's Crazy about the GPM steering blocks 👀. I've had solid luck with mine for over 2 years. I sometimes blow a stock driveshaft at the U joint, but not often enough to bother upgrading. Same with the diffs. Only time I've had a problem was when the rear (front facing) input bearing had seized up. It allowed my gear to overheat. I've also broken one when I trashed a chassis in my Granite like 2 years ago. Haven't had any actual diff problems. Still running stock weight fluids and set my slippers 1/4-1/2 turn out from snug. I try not to run heavier wheels and keep the total rig weight down running compact size Lipos. 🍻
@@richduperbash2966 I reckon I might be running too heavy a weight fluid in my diffs (amongst other things, but I'm not sending it more than twenty/thirty feet and it's landing onto grass ), I'm going to go and swap it out for some 30k in the rear and see if that helps. Thanks man 👍
I've ran several of these Hobbystar 3050kv 3670 motors through the years without issue. You can run their 3674 2650kv for cooler temps on 4s, but I've never exceeded 150F with the 3050kv. Past 170F is generally harmful to the rotor laminations over time.
I run Hobbystar 5200mah 100c 4s packs in my Big Rock and Senton and 5000mah 100c 6s hardcase single packs in my Kraton 6s. They're available from RCJuice. 🤗
@@panchogames9470 I'm running a Hobbystar 4092 1730kv motor with Max6 ESC in my Kraton 6s. The electronics could handle 8s for short periods, but 6s is plenty fast enough and lighter than running 8s. I don't recommend 8s for the diff gears either.
✌🏻😎🏴Nice one dude 👍🏻 you never disappoint 👍🏻. What exactly do you do when you say “I’m going to fix this real quick” ? Do you put a new A arm on or do you do something else??
Thanks Brother 👊. I just swapped on a new arm. Fortunately, the shock was still straight, the shock rod end screw was pretty tweaked 😂. Couldn't see it on the GoPro, but that was a brutal impact. The only "fix" was replacing it 🍻😎💪👊👊
Do you strip spurs often and have issues with stock motor bearings. Had many issues on my brcc and seeing as senton is same platform should have same issues??? Thanks
Hey Steve 🤗. I upgraded to the steel 4s spur gear and slipper assembly. The front motor bearing is subjected to fine dust that gets trapped within the slipper assembly. The solution is dremeling a small relief slit in the chassis (like the 6s rigs have) where the spur gear sits. (See 3:45 of the video).This allows any debris to shoot right out instead of getting trapped and recirculated within the gear box. Been doing this simple mod for years now.... it works awesome. 🍻
@@richduperbash2966 Cheers. I ended up doing slit mod on my big rock and it solved the problem. Just running stock Pinion and Steel spur also. Just checking as the Sentons I've seen generally haven't had the slit mod. I also got the upgraded metal motor mount as the stock one is subject to bending too. From Custom RC Upgrades I think but I'm UK. Great spot for the bash. Have nothing like that in the UK. :/
hello bro ... could you give me the link to the m2c raid hex adapter? Unfortunately I can't find it. the badland tires are excellent .. they are already on my mod list. i love my senton. my only problem is the slipper clutch. the motor is on 2400kv the esc stoke. have now changed the slipper to 57 0.8 mod steel which unfortunately often slips through. thank you for your help and the excellent videos. best regards from germany ...
Thank you my friend 🤗. This adapter is a prototype still in testing phase 👍. All M2C parts have to undergo rigorous testing before release to production and hitting the website. Hopefully won't be too long. I'm very impressed with them thus far 👀. I'm running the 4s steel 57T spur assembly. Might try adding threadlock to your slipper adjustment screw if it's coming loose. Here's one easier way to do it.😎💪👊👊ruclips.net/video/g7HHxXzF-VQ/видео.html
then I have to wait and hope that the test phase will be finished quickly. thanks for the video saw it yesterday in the arrma forum. good tip. if the adapters are freely available you can mention it in your video. rock n roll and don't just bash blast : D
I love these Sentons! I just noticed that lil humming sound you make each time the truck passes you its hilarious and quite adorable lmao!! I'm having a hard time with tires on mine it just eats them no matter what surface I run on they last about three battery packs before they're bald and rip apart, I only have this problem on the Senton, wth am I doing wrong??
The sound is hilarious 😂. I'm not sure what's up with your tires, but the stock ones do tend to wear out quickly. I wouldn't say you're doing anything wrong, just having fun. Might experiment with some other brand treads. 🍻😎💪👊👊
I'm running a 20T with my 3670 3050kv. Assuming your mesh and bearings are all good, might have to drop a tooth or 2 depending on your wheels. I'm fine with up to 150F motor for peak temps. That's still safe. 🍻
@@richduperbash2966 running the mx28 belted badlands, and I replaced the bearings. Mesh is fixed on the Integy motor mount so it's perfect. Was seeing Temps around 190-200 on the motor, want to stay under 180 of course. I'll Try a 15T and see how it goes. Thanks for the info!
Most prototype parts go into production immediately after testing provided no alterations or tweaks are required. Best guess is 3+ weeks before they hit the website, but I'm not certain. Could be sooner depending on M2C's CNC machine schedule. They're making tons of other parts too. 🍻
Yeah man iv been keen as to get a good 4x4 1/10 short course truck, I got a rwd but just not the same. Your definitely pushing me towards a Senton😅 Awesome bash man👊🤘
Thanks so much Brother 😜. I can definitely recommend the Senton 3s 😍. It's fast even with stock electronics and super durable. Very easy to wrench on with solid parts support and upgrade options. Finally added a Tbone front bumper right after this run 😂🍻😎💪👊👊
The wheel adapters are still in testing 👍. Probably won't hit the M2C Racing website for a few weeks. Here's a link to the motor mount. 🍻m2cracing.net/arrma-vorteks/583-m2c-3160-arrma-17mm-hub-extenders.html
Well.... unfortunately I don't see these as available on the M2C Racing website any longer. Could be from low demand, not sure 🤔 m2cracing.net/shop/shop.php#!/ARRMA/c/136127900
_If armmas not kickin you some merch you need to schedule a lil face time w the client , cuz it was your vids w out a doubt that made me purchase my senton and im sure plenty of others as well..perfect example of what any company would want as far as product representation_
Thanks so much my friend 🤗. ARRMA has definitely shown me some love through the years 👍. They appreciate the support and I love their vision, core values, and philosophy about progression . It's a mutual respect relationship. They're very receptive to basher feedback which helps everyone in the end. Not many RC companies seek out feedback like they do. 🍻😎💪👊👊
No I don't. I just pay close attention to my bearing health. The rear input bearings (front one especially) tend to gunk up with dirt and moisture fairly easily. I remove the motor/slipper assembly and spin each wheel by hand. If the input gear doesn't spin freely, I service or replace the input bearings. I also check my slipper bearings routinely and keep my slipper set 1/4-1/2 turn out from snug. 👍
Probably going to see multiple hex options with different offsets is my guess. M2C is happy to use their skills and creative genius to meet basher's requests. 🤗
I think this channel is bias about arrma products “every rig is really great” lol, just clown in’!!! they do make awesome products!! I’m so tired of the 2-4wd slashes after owning them for yrs, that’s why I bought a sct410.3. it’s nice to have something like this for an option. Idk about the pin drive over hex? I’ve had some bad luck in the past with pin drive. Wonder why they chose that? It obviously seems to be working cause this vid sold me on the 3s senton!!! Do you know if you can mount proline or jconcepts bodies in the senton? Awesome vid this thing is definitely impressive!!🤩🤩👍🏼
Thanks so much Brother 🤗. I do love my ARRMA's 😍. Have great local parts support and for Tekno parts as well. This direct fit wheel adapter was Avery's creation. ARRMA went with a 14mm metal hex for their 3s line which kinda limits the wheel options without changing the hex size or using an adapter of some sort. So far the axels and pins have held up great with this setup 👍. Just have to be mindful not to lose the pins when pulling the wheels. M2C Racing already designed a 3s direct fit 17mm hex adapter (at my request) which works Fantastic with standard solid hex rims 👌. Surely we'll see more M2C options specific to the Proline Raid style rims soon. I've seen guys run Proline bodies on the Senton 3s. You could probably fit up about any JConcepts body provided it had a similar wheelbase and width. 🍻😎💪👊👊
Thanks Brother 👊. I had serious doubts myself 3 years ago. Really wasn't interested. That changed after driving this rig bone stock. It grew on me and just got better with basic tuning, wheel swap, and suspension upgrade. 🍻
Thanks Kevin 🤗. Yes indeed, these adapters have a great offset compared to stock. Definitely adds overall stability. Much harder to roll with hard turns. 🍻
@@richduperbash2966 just what ive been wanting to hear, now its definitely going to be a min max killer 😝🤟 cheers for the reply dude, reaching far and wide with your content, over hear in Blackpool England🤙
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
So crazy even with the parachuting body how much control you still have!
Thanks so much Brother 🤗
The Traxxas Maxx body with a little modding looks and performs amazing. No more dirt being sprayed all over the electronics, no more parachute BS, skid plate options , no more limited tire clearance.
You always inspire me to bash harder😂 your content is always on point 👌
Thanks so much Kevin 🤗. Much appreciated Brother 🍻😎💪👊👊
Seriously...I really love the venue there dude...it's just perfect...
I just want to say thank you Mr Duperbash because of your video's i have a Senton 3s but more importantly i have my new fav Typhon Truggy just took it out sunday and had a blast.
That's so awesome Trewan 😱. Really appreciate the comment Brother. The Typhon is still my all-time favorite platform 🍻😎💪👊👊
I dont think ive ever seen someone control a car that good in the air
Thanks so much Lucas 🤗. It's about time to get the Senton back out 🍻
@@richduperbash2966 Actually just bought a senton, should be here tomorrow. Had one before but I sold it and got out of bashing and into crawlers but have been obsessing over a senton recently, cant wait!
What do you do to keep from blowing driveshafts? I’m stock system with new clutch at factory setting’s and I eat them and the cvd like candy. To the point I don’t run my armma anymore
Hey Mike. I've heard similar situations and feedback before. The first thing that comes to mind is an overly tight or faulty slipper assembly. I usually set mine 1/2 turn out from snug (which is tighter than the manual recommends) but have had great luck with it for years. Bad or failing bearings can also put crazy strain on the shafts just like large wheels or landing on throttle can, or heavy diff fluids. My guess is your slipper isn't slipping properly for whatever reason. I've seen springs lock up in the assembly among other weird instances. I should mention I'm using a metal spur (57T 4s slipper assembly) in this rig. I've had to disassemble a few of my slippers to troubleshoot stuff, but generally have good luck with my standard 3s slippers. I've also had to add threadlock on the adjustment screw to some of them that kept coming loose. Hope you get it sorted. It's super frustrating breaking the same parts repeatedly. 🍻
Dude! I'm kicking myself for feeling mine to get a bigrock... 👍 Awesome session, thanks
Thanks so much Brother 🤗. I love both rigs, but honestly have more raw fun driving my Senton. Thing is like a tank and always makes me bust up the way she flips and rolls 😂
Lol, even when not jumping, you're still in the air half the time. That thing skips across the dirt, barely touching. Love it!
Such a fun little Ripper 😍
Dude M2C stole my comment. Awesome didn't have a enough! Reverse! Frontflip. You are the master 🙌 we could all learn and have learned alot from watching your vids. Piece... .... late
Thanks so much Brother 😜. Love rippin this little green tank around 😍. Truly appreciate the kind words. Happy bashing as always!!!! 😎💪👊👊
That's so AWESOME that a Premium Band like M2C is making these beautiful designed parts for even the cheaper 3S rigs! Unbelievable what the rigs can take and how it handles with these mods. 👍👍👍
Couldn't agree with you more Kimberly 😍. So grateful Mitch and Avery took on the 3s line. These hex adapters are simply gorgeous 👀. The motor plate and chassis support system has exceeded my expectations. It truly makes the truck stronger no question. They're so talented at their craft it's amazing 😍
@@richduperbash2966 lol love you Sister 😜
@@Basherqueen whoops 😂. Sorry Kimberly 😍. My tired eyes didn't pick-up on the new profile picture last night 👀. My apologies. Hope all is well 🥰🥰
You can make any truck look good bro🤙 -What batt are you running 3or 4s?
The Senton, BigRock and Mojave seem to be the best bargain out of the arrma range💙👍
@@surfside75 thanks so much my friend 🤗. I was running a 4s Hobbystar 5200mah 100c hardpack with a 20T pinion. 😎💪👊👊
Very nice video man! I havnt seen many people pull off a nice video and capture the rc rig like you do. So big props on your filming skill set.
Thanks Cody 🤗. This rig is a Blast. 🍻
Crazy bash session! Definitely in my opinion the arrma 3s big rock and senton are the most durable 1/10 scale cars! I also love the new maxx but it has more weakness in durability section and the big rock handles better and the maxx electronics are kinda Crappy. But the maxx body is just eye catching.
That Senton is an Animal Rich!! Another Great upgrade from M2C!! Those Proline wheels are beefy for short course. The Buggy wheels are still my favorite!! The Senton on 4s just rips. The stalled backflips off the ramp were unreal !!Short course Madness at it's Best. All Hail the Bash King!! Stay safe Bro and bash on from Colorado!!!
Thanks so much Ervin 😜. M2C is killing it with all these incredible options!!!! The tires felt awesome, especially with the offset from the adapters👌. Love my Duratrax lockups buggy wheels on her too, but these offer better overall balance and control both on the ground and in the air. Truly appreciate the kind words Brother!!!! 🚀🚀😎💪👊👊
I love seeing videos on the 3s rigs especially for those that can't afford the more expensive 6-8s rigs. I love my wifes 3s senton! It definitely takes a beating!
Thanks Justin 🤗. The 3s rigs are an incredible value, especially for their durability and performance potential 😍. Bottom line . .. they're super fun to rip around, easily as fun as the 6 or 8s line, and don't cost nearly as much time or money to own and maintain. Appreciate your comment Brother 🍻
Killer session dear brother Rich, the Senton looks dualed as few, the ramp sessio was in its own league 👀🥰🥰...the Hex adapters looks AMAZING 🥰
Thank you so much dear Brother 😍. I honestly think the Senton takes more punishment than any of my rigs 👀. Such a joy to rip around, especially on 4s. Loving these new SC tires 😍. Hats off to Avery for another brilliant design with these hex adapters 👌👌😎💪👊👊
@@richduperbash2966how have the hexs held up on those proline wheels had any strip out what size hex adapters are u running.
Hello from Australia! Love the videos, thanks for sharing.😁👍
Thanks so much Brother 😜!!! Really appreciate it 🍻😎💪👊👊
Great video that Senton is awesome especially with the wheel extensions upgrades and tires👊👊💯💯
Thanks so much Brother Mike 😜. This rig is a complete hoot to bash. Props to M2C for another innovative design and hex option!!!! 😎💪👊👊
Hi Rich brother 👍 I think your the only one who can jump a Senton like that 😱 awesome upgrades and love the wheels 🥰 really enjoyed every minute of this Bashing season brother 👍😎😁👍
Thanks so much Tony 😜. Definitely an adventure hittingl bigger jumps with the Senton 😱. Never know what'll happen depending on the wind. Props to Avery with M2C for another awesome 7075 upgrade option. Hope all is well without too much rain there Brother 🤗🍻😎💪👊👊
Great adapter option and sweet bashing brother
Thanks so much Brother 😜
Nice video and test my friend, the 3s Senton is a great truck for sure 😎👍
Thank you dear Brother 🤗. The Senton is such pure fun 😍. Wanted to take here to the skatepark again, but ran out of time. Definitely taking her back next outing 🍻😎💪👊👊
“Alright guys enough gibberish and babbling..” but Rich dude your gibberish and babbling is so valuable to those of us taking the shortcut to these ruggedized beasts and saving coin along the way thanks to you sharing your knowledge and experience gained over the years. Thank you brother 🙏🏼🙏🏼🙏🏼
M2C should totally do some Raid 17mm aluminium adapters too, providing they aren't as expensive - the PL ones are WAY overpriced!
Yes and yes 😱. That was actually my initial thought and request with M2C 👍. It's only a matter of time I believe 😎💪👊👊
You have so much control on 4s!! I love the whole 3s lineup they are all fun in a different way!! 💯💯 You make amazing videos that inspire people in the rc community!! I can say that you have inspired me to build a ramp and start sending it!!!! Hope your back gets better so you can keep making great content!! 💯👏🔥💯👍
Awesome bash!!! I love the 3s line! you really put the beatdown on that one!! Incredible front flip at 6:45!! thanks for posting and abusing the parts!
Thanks so much Brother Avery 😜. The 3s line is so capable and such pure RC FUN 😍. You friggin nailed it with this innovative design my friend. Love the offset and so easy to mount up 👌. The looks factor is off the charts too 😱. Function and insane durability aside, I could see the crawler crowd wanting these for the scale appearance. They're absolutely gorgeous!!!! Thanks for another Epic upgrade option 🍻😎💪👊👊
Nice to see the little guy getting sent Rich 👍 not seen any new videos for a while,love the epic sends you do man 💯
Thanks so much Brother 🤗. I recently jacked my back up and had to just chill for awhile. Getting back in the swing of things fortunately🍻
@@richduperbash2966 ohh man that's not good 😐 hope you're better soon,I know the feeling lifting fridges and washing machines by myself for a living (house moves) back in the day literally ruined my back from that 😑,you definitely were the first on RUclips to inspire me into the hobby this year and I'm now obsessed with the hobby 😀 didn't even know you had a senton though,I gotta get out there more though get some videos uploaded 😀
@@differrc4049 ohhh damn 👀. Moving furniture and appliances is no joke. I was a furniture loader decades ago (sofa sleepers, recliners...etc) and worked in lumber and building materials way back for Home Depot. Too easy to jack the back twisting and torquing 😝
@@richduperbash2966 dahm brother home depot is like our B&Q 😂 propper grafting days lol...are you doing the EAST TACTICS FRONTIE? Plan to do it once our weather here gets better
That is a nice lookin truck Rich!! Those wheels set it off and perform awesome. Kick azz session with the jumps off the rock pile, keep on doing what you do brotha. Great stuff!! Peace man
Thanks so much Brother 😜. Loving these wheels and setup 😍. Think they're about perfect for this platform without being too big or adding too much weight. Great balance and stance with these adapters 👌. Truly appreciate the kind words my friend 😎💪👊👊
Luv the videos bro.plese tell me how i can get a set of those wheel adapters.i have a senton v3 3s with proline wheels and just keeps chewin up adapters.help !!!!!
Thanks Zane 🤗. Hopefully, these wheel adapters will go into production and be available on the M2C website soon. The plastic Raid hexes are just weak 😝. Here's a link to the website. My guess is a couple weeks, but I'm not sure. Mitch and Avery have been busy as heck working on several new designs. 🍻😎💪👊👊m2cracing.net/
Wow Rich! The SCT badlands give the Senton some sweet air control! Just love how your sending this rig. Always love the 3s Senton 🤩 Wheel adapters look pretty sweet too 👍
Thanks so much Brother Aaron 😜!!!! These "MX" version SC Badlands are frigging awesome 😱. The size, weight, and offset feel perfect with the M2C prototype adapters 👌. Totally changed the handling and overall stability. Big props to Avery for another sweet design. 🍻😎💪👊👊
Super nice rig❤.. you've got this sorted. I ordered titanium hinge pins and holders, but am now wondering after watching you tag the big boulder.. if I have ti pins installed and hit that same way will my chassis crack instead of the pin giving out?
Thanks Brother 👊. It's tough to say if you run titanium holders and pins if the chassis would bear the brunt in a violent hit. A really bent stock pin can stress the chassis too. Most upgrades are worth trying so long as they don't add excessive weight 🍻
I’m glad to you are able to be out there ripping it up without the smoky haze that’s plaqued us all summer
Thanks Greg 😁. Yeah this has been another nasty fire season for sure. So nice to have some clean air and blue skies at the moment 😍😎💪👊👊
Senton is so badass!! The Arrma 3s line is soooo good!!!!!
Yes indeed Brother 👊. Such a fun platform and great value overall. 🍻😎💪👊👊
Amazing test on the M2C wheel adapters bro!💪Avery is on top of the game with his designs!😍Watching this truck never gets old! It just hovers across the ground bouncing from tire to tire!🤣The Proline tires look great on it! Killer rips and ramp hits! Such a fun little truck I'm sure! Beautiful sunset bash at the end!😎💪👊👊🤙
Thanks so much Brother Eric 😜. Man these Badlands MX SC tires haul ass 😱😂. Definitely feel more planted than the Duratrax Lockups buggy wheels I was running. Loving the fitment and offset of these beautiful adapters Avery designed 🥰🥰. Perfect match up with the wheels 👌. The Senton is like a Jesus lizard running across the water 😂. So frigging hilarious to watch it skip around as it picks up steam. Truly one of the funnest and most durable in the fleet 💪. Nice to give my back a rest from loading the 8s beasts for a day too 😂🍻🤙🤙😎💪👊👊
The beast!! Just put mine working today also ! Salute !!
That's awesome Martello 🤗. Such a crazy FUN rig 🍻😎💪👊👊
Wicked Senton! Always liked the look....
Thanks Brother.. Me too 👍
I absolutely love my senton, it was super dope seeing it hit the ramp doing a wheelie 7:00 🤟🤟
Thank you Brother 🤗. Love my Senton too. 🍻😎💪👊👊
Nice work Rich. I don't understand why I see so many aftermarket options for Arrma 3S hubs when the stock Typhon 3S 17mm hubs are clearly the best, lightest, cheapest and most durable option. Maybe it's spacing.
Thanks Brother 🤗. I'm 100% happy with my stock Typhon 3s hexs paired with 1/2" offset rims. Still running the previous style solid F11 rims (17mm hex) with original Badlands 2.8 I glued on. This is another option for guys running the Senton, Granite, BRCC, or Vorteks when using the Raid style rims. Unfortunately, I think Proline is phasing out many of their older solid rim options. 🍻
Awesome bash Rich! 👌 The Senton is the toughest of the Arrma 3s line no doubt. Pity the 3s line just chew through parts quicker then a kid with a bag of sweets. Bash, wrench repeat! 🔧
Thanks so much Brother 😜. I absolutely love this rig 😍. Parts are fairly cheap and easy to replace. I threw in the towel and dropped on a Tbone Senton front bumper for next time 😂
Do you have a video showing the angle of the ramp?
As it seems to give you very good hight and distance on the jumps.
Rich did a whole vid on making his ramp check it out
Here's the link to my HD ramp build. I would've done a step by step how to, but it was raging hot mid summer and I had to bang it out 🍻ruclips.net/video/UMoMtseZABU/видео.html
Control is everything with the Senton and you have it, I don't laugh mine because of big air Rich you seemed to have conquered it. What a rip.
Thanks Harry 🤗. Brother I have so much raw fun driving this little green monster 😱🤣🤣. I will say these Badlands MX SC wheels are fantastic and the offset with these M2C adapters feels perfect!!!! Definitely helps overall stability and control. 😎💪👊👊
love my 550 mega, threw an old vxl-3s in it. roowwwdy unit!!!
I just picked this up used today with hobby wing setup .. I didn’t know you can bash em like that damn.
Great bash !Awesome mods , thx for sharing!
Thanks so much Brother Stephane 😜!!! Love this little Ripper 😍
@@richduperbash2966 I just love my little Vorteks 3s , so tuff !
I'll give a shot to opening up the frame at the spur gear ! Great idea Tx again
Hello Rich. How you doing. I just need to ask please. Are those pro line tires belted or not? I'm completely rebuilding my arrma senton Mega and what I need is set of tip top tires. I got Louise set but they are to soft and ballooning too much. Thanks for your help.
Doing well my friend 🤗. These Badlands MX SC tires aren't belted, but I'm not seeing any major ballooning. The foams feel quite firm and the rubber thick. We'll see how they hold over time, but I'm loving them. 😎💪👊👊
Those adapters are nice!! Gtta love the Senton 3s!!..I broke my front skid before also and lost my hing pin brace..Good idea with the tape to hold in place
Thanks Brother 👊. I started putting Gorilla tape under the skid (on the chassis) up over the front plate because mine went flying off one day 😂. As simple as it is, it's actually worked. I finally mounted up a Tbone bumper right after this session. 🍻😎💪👊👊
@@richduperbash2966 Nice..I gtta get me a T-Bone bumper also
Do you have a link for the aluminum wheel adapters??
Brother Rich thinking about getting one for my every other day runner nice awesome video 👊
Do it Kizzel 😱!!!! The Senton 3s is a Blast 😍. Super fun and easy to wrench on. I think you'll dig it Brother. Hit me up anytime if you questions about it. Very modular design and takes a serious beating with the big bumpers, nerf bars, and SCT body 🍻😎💪👊👊
@@richduperbash2966 Thanks brother much love I appreciate the good input 👊👊
Wow it's amazing that senton can fly in the sky bro!! ,👍💯💥
Thanks Brother 😜. She actually jumps pretty good when the wind isn't too strong 👍. The wheels and shocks make a huge difference 🚀🚀
Great vid. As always. I grew up in Rocklin. I have Granite BLX with the M2C upgrades, and two 6s Arma Kratons. I would like to come to Rocklin again and do some bashing. Is there a good place to go?
Thanks Brother 🤗. Great choice of rigs 👍. This was out at Folsom Lake. Tons of space and terrain to rip around with the crazy low water levels. Very few visitors with almost zero boater traffic. There's also a nice gravel mound area behind Walgreens off 12 Bridges and 65 area. Unfortunately, construction projects have eliminated some of the better local spots. 🍻
Good to see that little ripper out there rippin and jumpin Bro Rich! What a hauling ass screamer LoL 🤣. She's a Fun one for sure man! What an upgrade from M2C with those aluminum hex adapter. Some innovative thinker and constant innovation over there at M2C. This is a big one over the plastic shit LoL 🤣. How the hell you keep her landing like a Cat off the ramp with the parachuting body and strong wind against you is beyond me 👀😳😍😂. I forgot you're Rich Duperbash! LoL 🤣. Another awesome session Bro!
Thanks so much Brother Chris 😜!!!! She's a little wild animal on 4s no doubt 😱😂. Gotta say these Badlands MX SC tires are Killer!!!! Felt perfect on the green monster. Especially with the offset of these beautiful, direct fit 7075 adapters 😍. I can't run plastic fantastic with the raid hexes. Been there, done that 🤣. So stoked Mitch and Avery are pumping out these incredible options!!!! The Senton took another flogging in stride 👍. She's a bit of a gamble off the ramp with the wind and her big body 😱🚀🚀. I think the wheels were a big help though. Truly appreciate the kind words Brother!!!! 🍻🤙🤙😎💪👊👊
AWESOME VIDS ! FANTASTIC RUNS ! THANK YOU FOR THE GREAT SHOW AND INFO ! What gearing are you running on the Senton with the hobbystar set up ?
Thanks so much Corey 😜. I'm running a 20T Robinson Racing Extra Hard 0.8 mod pinion with the 4s metal slipper gear assembly. I set my slipper about 1/2 turn out from fully snugged. The standard plastic spur works fine, but I like the added durability of the steel option. 😎💪👊👊
Awesome ! Thanks again and much appreciated for the extra tips ! Going for the full setup ... can’t wait to run it on the 4s !
Hey Rich, how do you go about the slipper clutch coming loose ? I got so sick of it that I stopped using my outcast 4s
I've had great luck simply adding threadlock to the back end of the adjustment screw 👍. I use Loctite blue 242 medium strength and let it set atleast 24 hours. 😎💪👊👊
Right on bud
You need a basher body to test 👊😎
The hexes are insane! Lightweight, strong, innovative,... !
Yes indeed 😍. So excited about what M2C is doing lately 😱. They can literally make about anything they imagine and have the creativity, equipment, and CNC mastery to do it perfectly 👌
Thanks for sharing all your knowledge! Love the 3s line. My son (6) can't break his bigrock😄. Like to see the Crusher again. My outcast has Crusher chassis, and its the perfect length (you said that😅). Mabye test the new m2c overkill driveshafts and show us the crusher again 😎 (If its alive). Big support from Norway!
Thanks Henning 🤗. So awesome to hear about your son's BRCC 😍. My Crusher is a bare chassis at the moment. I might convert my RTR K8s with it 🤔. Definitely a perfect length for all around bashing 🥰🥰. Definitely miss running her. The Overkill driveshafts have done Fantastic 💪. Been testing them with my 08s, just haven't put a vid together yet. Thanks for the suggestion and happy bashing my friend!!! 🍻😎💪👊👊
Super sweet bro!
Hey rich I just got a losi DB pro ordered, it’d be interesting to see what you could do with it! I know it’s not necessarily designed for hard bashing but guys say they’re super tough. Im sure you could make it a monster
I'll have to take a closer look 👀. Been interested in getting a Losi for awhile now. 🍻😎💪👊👊
AWESOMENESS Brotha!!!
only
Rich Duperbash could send a SCT like that. Awesome stuff.
Thanks so much Paul 🤗. Such a fun little Ripper 😍. Not the easiest to launch, but always have a blast going for it. 🍻😎💪👊👊
Beast of a little truck, epic run and sweet upgrade on the wheels brother big up m2c they are killing it with the upgrades right now with the xmaxx stuff too 👍😉👊
Thanks so much Al 🤗. Mitch and Avery are on fire with all these new options 😱. So awesome to see their CNC mastery and creative designs coming together!!!! They're changing the bash game one bit at a time 🍻
@@richduperbash2966 I know how much hard work goes into what they do as I use the same machines as they do at work but I work with plastic not aluminium
I'm super jealous you managed to run that 4s on stock driveshafts. I kill those so quickly on the big rock, but I've not taken an arm off yet in a crash. I did manage to mod the upgraded CVD axels from the outcast 4s which are slightly bigger than the uprated ones for the 3s stuff by shortening them and widening out the axel hubs with a dremel, so far they're proven pretty tough.
My GPM steering blocks died, totally came in half where the inner bearing sits 😂
You have some really nice bash spots there man 👍
Same with my typhon3. On 4s I kill shafts. I just killed my rear diff yesterday
@@justinblackwell1617 yeah even on 3s I kill the basic driveshafts. The plastic diffs are rubbish and they should've shipped them with the cnc metal ones really.
Thanks Dan 🤗. Man that's Crazy about the GPM steering blocks 👀. I've had solid luck with mine for over 2 years. I sometimes blow a stock driveshaft at the U joint, but not often enough to bother upgrading. Same with the diffs. Only time I've had a problem was when the rear (front facing) input bearing had seized up. It allowed my gear to overheat. I've also broken one when I trashed a chassis in my Granite like 2 years ago. Haven't had any actual diff problems. Still running stock weight fluids and set my slippers 1/4-1/2 turn out from snug. I try not to run heavier wheels and keep the total rig weight down running compact size Lipos. 🍻
@@richduperbash2966 I reckon I might be running too heavy a weight fluid in my diffs (amongst other things, but I'm not sending it more than twenty/thirty feet and it's landing onto grass ), I'm going to go and swap it out for some 30k in the rear and see if that helps. Thanks man 👍
@@richduperbash2966 whats your recommendation for a budget friendly rx/tc for my 4s typhon AVC would be nice
Very old video but how are you running that motor on 4S I have it on 3s in the same car and even with a 19 tooth pinion gets pretty toasty with fans
I've ran several of these Hobbystar 3050kv 3670 motors through the years without issue. You can run their 3674 2650kv for cooler temps on 4s, but I've never exceeded 150F with the 3050kv. Past 170F is generally harmful to the rotor laminations over time.
Awesome run, and love the idea, just hopefully the nut will stay tight, killer bash, now you have me wanting to fix my 3s senton, needs shocks
Thanks so much Brandon 🤗. I did have to snug the nuts down for sure. Definitely need quality serrated nylon lock nuts running 4s power especially. 🍻
@@richduperbash2966 i have an idea, but its something id probably have to draw out to explain
Hey rich i just come from seeing kraton 6s vids but what batterys u usually run ?
I run Hobbystar 5200mah 100c 4s packs in my Big Rock and Senton and 5000mah 100c 6s hardcase single packs in my Kraton 6s. They're available from RCJuice. 🤗
Thx bro am happy u respond have a nice one . Huge fan bro keep it up with ktaton vids they are fireee 👍
Soo u have a system 8s with 6s battery kraton
@@panchogames9470 I'm running a Hobbystar 4092 1730kv motor with Max6 ESC in my Kraton 6s. The electronics could handle 8s for short periods, but 6s is plenty fast enough and lighter than running 8s. I don't recommend 8s for the diff gears either.
Thx u soo much bro for info bro u ar realy nice guy boiiii take care 😃
Love the senton one of my favorite rc’s
Me too Donnie 🤗. Such a truly FUN platform 😍
I just got mine a week a go love it
Geez Rich, can’t believe you’re sending that little truck that high 😂 Arrma gonna come out with a Duperbash parachute wing kit
Thanks Brother 😂. This sucker is a gamble to send upwards 😱. Can get a bit sketchy once the winds get moving 🍻😎💪👊👊
💭🤔Can’t wait until you do the Mojave 6s
Yeah it's long overdue Brother 🍻
✌🏻😎🏴Nice one dude 👍🏻 you never disappoint 👍🏻.
What exactly do you do when you say “I’m going to fix this real quick” ? Do you put a new A arm on or do you do something else??
Thanks Brother 👊. I just swapped on a new arm. Fortunately, the shock was still straight, the shock rod end screw was pretty tweaked 😂. Couldn't see it on the GoPro, but that was a brutal impact. The only "fix" was replacing it 🍻😎💪👊👊
Great video bro! 👍 Just made me wana fix my upgraded senton n get it rippen.
Thanks Brother 😜. Hope you get yours out for a rip soon!!!! 😎💪👊👊
Do you strip spurs often and have issues with stock motor bearings. Had many issues on my brcc and seeing as senton is same platform should have same issues??? Thanks
Hey Steve 🤗. I upgraded to the steel 4s spur gear and slipper assembly. The front motor bearing is subjected to fine dust that gets trapped within the slipper assembly. The solution is dremeling a small relief slit in the chassis (like the 6s rigs have) where the spur gear sits. (See 3:45 of the video).This allows any debris to shoot right out instead of getting trapped and recirculated within the gear box. Been doing this simple mod for years now.... it works awesome. 🍻
@@richduperbash2966 Cheers. I ended up doing slit mod on my big rock and it solved the problem. Just running stock Pinion and Steel spur also. Just checking as the Sentons I've seen generally haven't had the slit mod. I also got the upgraded metal motor mount as the stock one is subject to bending too. From Custom RC Upgrades I think but I'm UK. Great spot for the bash. Have nothing like that in the UK. :/
hello bro ... could you give me the link to the m2c raid hex adapter? Unfortunately I can't find it. the badland tires are excellent .. they are already on my mod list. i love my senton. my only problem is the slipper clutch. the motor is on 2400kv the esc stoke. have now changed the slipper to 57 0.8 mod steel which unfortunately often slips through. thank you for your help and the excellent videos. best regards from germany ...
Thank you my friend 🤗. This adapter is a prototype still in testing phase 👍. All M2C parts have to undergo rigorous testing before release to production and hitting the website. Hopefully won't be too long. I'm very impressed with them thus far 👀. I'm running the 4s steel 57T spur assembly. Might try adding threadlock to your slipper adjustment screw if it's coming loose. Here's one easier way to do it.😎💪👊👊ruclips.net/video/g7HHxXzF-VQ/видео.html
then I have to wait and hope that the test phase will be finished quickly. thanks for the video saw it yesterday in the arrma forum. good tip. if the adapters are freely available you can mention it in your video. rock n roll and don't just bash blast : D
I love these Sentons! I just noticed that lil humming sound you make each time the truck passes you its hilarious and quite adorable lmao!! I'm having a hard time with tires on mine it just eats them no matter what surface I run on they last about three battery packs before they're bald and rip apart, I only have this problem on the Senton, wth am I doing wrong??
The sound is hilarious 😂. I'm not sure what's up with your tires, but the stock ones do tend to wear out quickly. I wouldn't say you're doing anything wrong, just having fun. Might experiment with some other brand treads. 🍻😎💪👊👊
I've been trying to run my granite on 4S with the hobbystar 3670 2280kV, but with a 19T the temps are too high. You running stock 15T in this?
I'm running a 20T with my 3670 3050kv. Assuming your mesh and bearings are all good, might have to drop a tooth or 2 depending on your wheels. I'm fine with up to 150F motor for peak temps. That's still safe. 🍻
@@richduperbash2966 running the mx28 belted badlands, and I replaced the bearings. Mesh is fixed on the Integy motor mount so it's perfect. Was seeing Temps around 190-200 on the motor, want to stay under 180 of course. I'll Try a 15T and see how it goes. Thanks for the info!
@@BigTtheItalian you bet Tony, let me know how the 15 works 🍻
Damn I was fourth on comments today , getting better . Love your skill and vids duperbash. 🤜🏼🤛🏼👍🏼😜
Thanks so much Lucas 🤗. Really appreciate it Brother 🍻😎💪👊👊
Do you know when those get released to the public or if they will? I love the m2c stuffs and always excited to see more for the 3s line.
Most prototype parts go into production immediately after testing provided no alterations or tweaks are required. Best guess is 3+ weeks before they hit the website, but I'm not certain. Could be sooner depending on M2C's CNC machine schedule. They're making tons of other parts too. 🍻
Yeah man iv been keen as to get a good 4x4 1/10 short course truck, I got a rwd but just not the same.
Your definitely pushing me towards a Senton😅
Awesome bash man👊🤘
Thanks so much Brother 😜. I can definitely recommend the Senton 3s 😍. It's fast even with stock electronics and super durable. Very easy to wrench on with solid parts support and upgrade options. Finally added a Tbone front bumper right after this run 😂🍻😎💪👊👊
Post some links to the products so we can buy them
The wheel adapters are still in testing 👍. Probably won't hit the M2C Racing website for a few weeks. Here's a link to the motor mount. 🍻m2cracing.net/arrma-vorteks/583-m2c-3160-arrma-17mm-hub-extenders.html
Thanks
Awesome bro 💥💥
Complete info wheels and hex pliss
Well.... unfortunately I don't see these as available on the M2C Racing website any longer. Could be from low demand, not sure 🤔 m2cracing.net/shop/shop.php#!/ARRMA/c/136127900
Your Skills are Simply Amazing to Watch!! Beefcake City! 👍👍🏆
Thank you so much Brother 😜. Truly appreciate the kind words 🍻😎💪👊👊
_If armmas not kickin you some merch you need to schedule a lil face time w the client , cuz it was your vids w out a doubt that made me purchase my senton and im sure plenty of others as well..perfect example of what any company would want as far as product representation_
Thanks so much my friend 🤗. ARRMA has definitely shown me some love through the years 👍. They appreciate the support and I love their vision, core values, and philosophy about progression . It's a mutual respect relationship. They're very receptive to basher feedback which helps everyone in the end. Not many RC companies seek out feedback like they do. 🍻😎💪👊👊
Man that thing takes it and ask for more awesome video
Thanks so much William 🤗. She takes a beating no doubt 😎💪👊👊
You bash so so hard i need to just go for it like you do bc im breaking parts anyway.just ordered this truck though cant wait love my other 3s trucks
Thanks Ryan 🤗. Congrats on your Senton 3s 😍. She's a little Beast, especially dialed in. I say just go for it. Parts break either way 🍻😎💪👊👊
Do you have any issues with the rear diffs pushing it at that speed?
No I don't. I just pay close attention to my bearing health. The rear input bearings (front one especially) tend to gunk up with dirt and moisture fairly easily. I remove the motor/slipper assembly and spin each wheel by hand. If the input gear doesn't spin freely, I service or replace the input bearings. I also check my slipper bearings routinely and keep my slipper set 1/4-1/2 turn out from snug. 👍
@@richduperbash2966 stock diffs? Also what rc controller are you using? Really enjoyed this video :)
love my senton but yours is awesome 👌👍👍😀
Thank you Brother 🤗
We just need this for the Mojave now
Probably going to see multiple hex options with different offsets is my guess. M2C is happy to use their skills and creative genius to meet basher's requests. 🤗
Senton with wings!
M2C should make something for the ryft it needs to be alittle wider
That's certainly possible 🤔. I'll mention it to Mitch and Avery 🍻
I think this channel is bias about arrma products “every rig is really great” lol, just clown in’!!! they do make awesome products!! I’m so tired of the 2-4wd slashes after owning them for yrs, that’s why I bought a sct410.3. it’s nice to have something like this for an option. Idk about the pin drive over hex? I’ve had some bad luck in the past with pin drive. Wonder why they chose that? It obviously seems to be working cause this vid sold me on the 3s senton!!! Do you know if you can mount proline or jconcepts bodies in the senton? Awesome vid this thing is definitely impressive!!🤩🤩👍🏼
Thanks so much Brother 🤗. I do love my ARRMA's 😍. Have great local parts support and for Tekno parts as well. This direct fit wheel adapter was Avery's creation. ARRMA went with a 14mm metal hex for their 3s line which kinda limits the wheel options without changing the hex size or using an adapter of some sort. So far the axels and pins have held up great with this setup 👍. Just have to be mindful not to lose the pins when pulling the wheels. M2C Racing already designed a 3s direct fit 17mm hex adapter (at my request) which works Fantastic with standard solid hex rims 👌. Surely we'll see more M2C options specific to the Proline Raid style rims soon. I've seen guys run Proline bodies on the Senton 3s. You could probably fit up about any JConcepts body provided it had a similar wheelbase and width. 🍻😎💪👊👊
Great rigs
That car makes sometime grindy noises, you make it scream :-)
Thank you my friend 🤗. I was getting some body rub with the tires, just not enough to slow her down 🍻
Is this on plastic drive train?
Arrma has all metal gears in the 3s line, even in the servos.
I just don’t like any of the 3s lineup. Idk. Just not my style. But great video bro.
Thanks Brother 👊. I had serious doubts myself 3 years ago. Really wasn't interested. That changed after driving this rig bone stock. It grew on me and just got better with basic tuning, wheel swap, and suspension upgrade. 🍻
What system you have
U ther
Hobbystar 3670 3050kv motor with BLX 120 amp ESC.
@@richduperbash2966 cool love it
💪🏾💯🔥
The Sentons are tough as
Yes they sure are 🍻😎💪👊👊
I just came across a film called "flying cars". It's about rc...kinda. anyone seen it?
do you live in america?
Yes....near Sacramento CA. 😎💪👊👊
I wanted these exact tyres for my sct 410 for ages and they are never in stock for 2 years :( proline suck.
That does suck 😔. Are you sure they weren't the the original Badlands SC 🤔. These beefier SC "MX" style were released last April I believe.
@@richduperbash2966 the were the proline badlands MX SC 2.2/3.0. They were not the raid wheels though but the previous style wheels with 12mm hex
Would this slightly widen the wheel base of the big rock? Great video as always dude🤟
Thanks Kevin 🤗. Yes indeed, these adapters have a great offset compared to stock. Definitely adds overall stability. Much harder to roll with hard turns. 🍻
@@richduperbash2966 just what ive been wanting to hear, now its definitely going to be a min max killer 😝🤟 cheers for the reply dude, reaching far and wide with your content, over hear in Blackpool England🤙