Replacing bathroom taps DIY. Its easy!!

Поделиться
HTML-код
  • Опубликовано: 2 июн 2020
  • In this video I show you how to replace your old sink taps and spout (Faucet) with new ones. This is a really cheap and easy way to make your bathroom look more modern or replace old and broken taps. I was prepared to replace the mixing pipes and everything but it turns out the old taps can be simply removed and replaced.
    Please like and subscribe for more DIY videos.
    Music:
    Upbeat Corporate by JP Bianchini
    www.jpbianchini.com/
    • [FREE TO USE] Upbeat C...
  • ХоббиХобби

Комментарии • 46

  • @TheMightyTigz
    @TheMightyTigz 2 года назад +13

    The spout is the trickiest part mate, that's the part we need to see lol

    • @berko79
      @berko79  2 года назад +1

      haha yeah i know. I really couldn't film that part it was just too cramped. Got an adjustable spanner on the nut and just loosened it then spun the nut off. it then just pulled straight up.

  • @ursulanauer5586
    @ursulanauer5586 3 года назад +4

    Helped a lot, thought I was gonna have to install the whole thing but thanks to your video I only replaced the top parts 👍👌

    • @berko79
      @berko79  3 года назад

      No problem 👍 glad to help... Saves heaps of time (and money possibly) doing it that way!

  • @komalkul
    @komalkul Год назад +1

    Exactly what I needed! Thank you so much 👍🏽

    • @berko79
      @berko79  Год назад

      You are welcome. Glad it helped!

  • @tomfyfe1070
    @tomfyfe1070 2 года назад +1

    Great video.

  • @brianhart6554
    @brianhart6554 2 года назад +6

    Thank yoy useful but the background music was too loud

    • @berko79
      @berko79  2 года назад +1

      Noted, I'll make sure its turned down for the next one.

  • @kayjenkins731
    @kayjenkins731 2 года назад +4

    Just about to tackle this job, your video was simple and to the point, looks like the spout is going to be tricky.

    • @berko79
      @berko79  2 года назад

      Hope it went well!

    • @kayjenkins731
      @kayjenkins731 2 года назад +1

      @@berko79 It did, your video saved us alot of time, thankyou

  • @Balaji-fd5xb
    @Balaji-fd5xb 2 года назад +1

    Really looking for this model replacement thanks a lot

    • @berko79
      @berko79  2 года назад +1

      No problem 👍

  • @paulg6340
    @paulg6340 Год назад

    Cheers mate, going to try this tomorrow :)

    • @berko79
      @berko79  Год назад

      Nice, hopefully it all goes smoothly for you

  • @joynalhussain504
    @joynalhussain504 3 года назад +1

    Do you have a video on how to do the same on a Basin. I can't find any video's that shows how to change Basin normal separate taps into a mixer

  • @timamor5350
    @timamor5350 2 года назад +1

    Onya Berko!

  • @winstonwithy7036
    @winstonwithy7036 3 года назад +2

    I have the exact same tap system like yours, my gooseneck spout cannot be fully turned around to unwind it as it's too close to the vanity wall. How did you untighten from underneath? to me it looks really intimidating and I am not sure how to do it. it is very narrow underneath as it got blocked by the belly of the vanity sink. What kind of tool you used to take off the spout?

    • @berko79
      @berko79  3 года назад +2

      Yes, it was a bit of a squeeze inside the vanity. I cant remember exactly how i did it, but it wasnt has bad as I thought it was. i think to undo the spout i used an adjustable spanner (wrench) and just put it up vertically. When you get about 1/4 of a turn it will be finger tight.

    • @winstonwithy7036
      @winstonwithy7036 3 года назад +1

      @@berko79 Thanks, will try it out and hope I can replace it

  • @matthewgreenrod365
    @matthewgreenrod365 3 года назад +3

    Nice video. 20 min install and the plumber chargers over $200 bucks.

    • @berko79
      @berko79  3 года назад

      Cheers, Not that hard and yeah saves a decent amount of cash!

  • @61sunset
    @61sunset 7 месяцев назад +1

    Hi I got the same taps as you, however I couldn't unscrew the spindle off the rest of the bottom part as you show at 2.13. Mine doesn't just screw off as yours. How do I do it ??

    • @berko79
      @berko79  6 месяцев назад

      Did you have any luck? sometimes it looks like they dont come apart but you can undo it - if it doesnt even have a spanner spot at all you may need to replace the whole thing back to the pipe unfortunately.

  • @wallyi9170
    @wallyi9170 Год назад +1

    I need to buy that type of tab ..... , couldn't find at Reece or banning. The push in tab .
    Where can I find it please .

    • @berko79
      @berko79  Год назад

      Pretty sure i got them from Reece. Pretty sure they are these ones: www.reece.com.au/product/tapware-accessories-c2518/basin-tapware-c743/basin-tap-sets-c746/posh-bristol-basin-set-swivel-chrome-4-star-9502195

  • @nicktaylor5987
    @nicktaylor5987 3 года назад

    How do u take the body off the tap, to just replace the top bits

    • @berko79
      @berko79  3 года назад

      you mean what i did at about 1:40? you just undo them with an adjustable spanner and they come out. They can be a bight tight if they havent been done for a while

  • @dianneD27
    @dianneD27 Год назад

    How do I stop it leaking😅

  • @mets23q
    @mets23q 8 месяцев назад +1

    Whered you buy them taps

    • @berko79
      @berko79  8 месяцев назад +1

      Reece Plumbing - Posh Bristol Basin Set Swivel Chrome (4 Star)
      Product code: 9502195

  • @garryrawlinson8663
    @garryrawlinson8663 5 месяцев назад

    Ok

  • @user-mj9vl3vy3i
    @user-mj9vl3vy3i 10 месяцев назад +2

    Turn the background music off for god sake

  • @julieprj9225
    @julieprj9225 22 дня назад

    You didn’t show me the tool you used to tighten it at the end, you have to show the camera and tell us where we can get it from. I have no idea

  • @ztrnch
    @ztrnch 2 года назад +6

    Music is too loud

  • @meganbrain8870
    @meganbrain8870 4 месяца назад +1

    This isn't something I should do myself really, is it?

    • @berko79
      @berko79  4 месяца назад

      It really is pretty basic but it depends on your level of DIY experience I guess. If it looks tricky from the video it might be best to leave it to the professionals.

  • @ava1421
    @ava1421 Месяц назад

    Such a shame the music drowned out what you were saying. Maybe upload it again without the music.

  • @mitcheyoaudeeyo6783
    @mitcheyoaudeeyo6783 6 месяцев назад +2

    whats with the ridiculous music cant hear you

  • @94141295
    @94141295 21 день назад

    The music was dreadful and unnecessary, other than that a good video.

  • @jennypeters2360
    @jennypeters2360 9 месяцев назад +3

    Be great without that unnecessary music.

    • @jamesmyers777
      @jamesmyers777 6 месяцев назад

      For sure music doing my head in