Tech Tip 👨🏭⚡️how to change wire in mig welder - step by step guide 🗒️
HTML-код
- Опубликовано: 21 янв 2024
- A step-by-step DIY guide on how to change the wire in your mig welder 👨🏭🪡🔥
Changing the wire in a MIG welder involves several steps:
1. Safety First:
- Turn off the welder.
2. Remove the Spool:
- Open the side panel of the welder.
- Release the tension on the wire by loosening the tensioner.
- Take out the old wire spool.
3. Prepare the New Wire Spool:
- Ensure the new wire matches the specifications for your welder.
- Place the new wire spool on the spindle, making sure it rotates freely.
4. Thread the Wire:
- Feed the new wire through the wire guide and into the hose assembly.
- Guide the wire through the welding gun's cable.
5. Adjust Tension:
- Tighten the tensioner to apply moderate pressure on the wire without deforming it.
6. Reconnect the Power:
- Turn it on.
7. Test the Feed:
- Run the wire through the system to ensure smooth and consistent feeding.
8. Adjust Tension as Needed:
- Fine-tune the tensioner if necessary to prevent wire jams.
Always refer to your welder's manual for specific instructions, as procedures may vary between different models. If you're unsure or uncomfortable with any step, seek guidance from a professional or someone experienced in welding.
** Bad Chad uses 0.23 wire because he likes how the smaller wire melts faster on the sheet metal than the 0.30 **
#badchad #welding #tutorial #migwelding #diy #cars
![PADDINGTON IN PERU - Official Trailer [4K] - Paddington Bear is back!](http://i.ytimg.com/vi/lKgitu25ZAg/mqdefault.jpg)
![DDG & Blueface - Top ft. Swae Lee [Music Video]](http://i.ytimg.com/vi/p2wIDXar9ns/mqdefault.jpg)
So glad Chad is willing to teach on his videos and he is right many times changing a spool of wire doesn't go that smoothly
Another tech tip for those that don't already know, crank your wire speed up all the way when you put in a new spool of wire and don't forget to turn it back to where you had it previously set at when you get the wire fed through.
Some good tips in this video and yep, you definitely don’t want to let go of the wire when threading it through. I’ve been there done that.
Really appreciate this video! Had no idea how a welder works, let alone how to load the wire!
And again another Segment..."Tech Tips" great videos Chad and Jolene.
I witnessed a miracle! I don’t think I’ve ever had the wire feed right in like that.
Post anything we'll watch it 😊❤ react to music/ movies, cook/grow food....day in the life of Fina ❤ drone footage of Chad's builds whilst driving them, take us in the antique shop when you buy/browse 😊😂 show us the old projects we miss ❤🎉
I have been watching, stopping, and zooming in on the welder in many videos, trying to get the make and model of what welder chad likes and uses. Please let me know. If you could message me this info, I'd appreciate it.
I love the channel. Ignore the haters. Great information 👍
Thank you for the bonus video Chad & Jolene very instructional for those needing to learn to reload the wire feed.
I have the same welder. Nice job guys.😁
Oh yeah ..double the pleasure of watching Bad Chad builds ..now for streaming cameras mounted around the shop and yard activated by motion ..soon hopefully Jolene will start a merchandise channel that highlights the merchandise from the front facing container store ..Hiltz Inc branching out ..!!
Lincoln is the Best !!!
Hi Chad ,Jolene ,Nate and Doug.. I have a 1995 Lexus es 300 I am fixing up for my son to have, Might not be an American car but it’s dependable and runs great .keeps me busy at 60 ✌️🍀 positive vibes from California 🌞
Thanks Jolene for your extra content, you guys make a great team,behind every good man, there is a great woman
Chad you have made a Hudson hornet🎸👌Best regards from Sweden
I always turn my feed rate all the way up so it feeds through faster
I really like this approach to a second channel. Thanks for sharing with us.
Great video Jolene! Keep them coming
Bonus. just what the world needs. Bonus footage. Be well.
Thanks Chad and Jolene, my wife bought me a welder for Christmas. Love your video content wish I had the room to do what you do.
Fantastic programme
You should put a new liner in the whip
@Jolene maybe Chad could now also french in the grill. a little more beef on the front end. I don't think it would look out of place. 🙂
Fantastic workmanship without a doubt in my mind
Very good video today thank you Jolene
Oh your so clever chad, wish I was as clever as you... If someone can use a Lincoln mig I'm pretty sure they know how to change the wire...
you prob do !! look at what they are achieving, ask yourself what have you achieved ? well your here watching so 🤙
Thanks for the tec tip video. Wish I could watch more this video aloud me to do so. You guys should put up a live feed that we could watch a full work day. Love the content keep up the great work.
I know Chad didnt say it but IM assuming the larger wire is for larger Thicker materials and or gaps?
This car gets more amazing with every modification
Great stuff not had to change mine yet 😮
FYI sparks can put a whole in the rad
Thank you for sharing
Excellent teacher
I still think that car would look great with some big black grill! Like radiator pipes in an old house
Good job
Thanks J & C
He’s a different guy when he works without having to rush to get it done.
Thanks
Jolene ask Chad if there's a purpose you can use the left over wire for ? Or is it just scrap . Thumbs-up Jolene and Chad love the tip ! Jolene thanks for taking the time to do the video normally I had a friend do that for me lol .
I use mine for hanging wire while painting
Hey Chad, loving the build! I know you wanted a certain look and I wanted to throw out a suggestionn that might be right in line with your Bellybutton. What if you made a visor style hood over the headlights? It would give it that tucked in look to mimic the slope of the bumpers. Just a thought.
Love your show you guys build sone bad ass stuff!! Hey just so you know You don't have to take that wing nut or the center off all you have to do I push that tab and slide it off and then when you put it back on just push it and trun and it's back on!
Love the detail welding work on the French bumper. Wasn't sure about the low hanging fangs on the bumper but now I see they actually add to the overall front pulling the eye into the full picture with the front, headllights and downward and outward. Car is really coming together. Great work, as always, Joelene. Take care.
they look like teeth
They are coming off
What a JOKE THAT CAR LOOKS LIKE CRAP WHAT RU THINKIN AND THATS NOT HOW U FRENCH ANYTHING HILLBILLY HILTZ
What a joke all of it
HILLBILLY HILTZ TE DESTROYER OF PERFACTLY GOOD CARS
Nice 👍
I always enjoy watching you two. You guys are so lucky to be able to work as a team, "Work together, Stay together"
I'm excited
Jolene, With all due respect Chad needed his mike on as he was a little hard to hear. A great lesson for many thank you !!!!
next time when Jim shows up, hope you can film Chad's course to help him how to use the mig welding ...
Icari
Chad you should be using the felts I dropped off when we visited in August. I was driving the 52 F1 2 tone red with tilt front end and stained glass tailgate. Along with a 40 Plymouth and a 34 Ford 😎😎
Jolene forgot to put a mic on you? 6:08 - 6:37 I could not hear what you were saying.
👍👍
Woooooooooooooooooow!
💥💥
sorry, i mean the tool for scratching/prepping the bare metal...
Mite say don’t use that big plug and you then can use smaller spools of wire for us guys that do that.
❤
Can you please show that tool from Eastwood I think, if he uses it on skirts? I'm thinking of buying one. ✌
I'm looking to get 1 also.
Monday
😎👍
... if not weekly or better one SHOULD blow [with your air hose] the dust off of the welder. Inside, Under, the front and the back as well as the top of the machine/welder... AT LEAST when one changes the wire...
same as you lifting your hood on your car 1s a week dip the oil, check antifreeze a quick visual of your engine compartment.. do you do that ? and by the way checked mine yesterday everything looked ok and checked the wifes car too. with any equip or machines or boats before you start if its 3 times a day you do it. 🤙
What gas are you running
microphone isnt working
Is it expensive that wire
i am wondering about the bumper guards ,,,,,, will the car go up the ramp ? without scrubbing
They are coming off
Jolene could you ask Chad to explain the advantages of using mig gas verses using flux core wire. I have the equipment to mig weld but since I mostly weld outside the garage door I do better with the flux core.
Twice the shielding with Flux core wire, also known as intershield wire welding
You'll get cleaner, better welds with gas. You'll also use less wire with gas because the flux core wire is hollow.
Jolene, maybe any chance, if chad could explain how to adjust the mask flash settings and replace the batteries in it ?
That dummy doesn't even know there's a battery on it
@@davemunson5872 is he a dummy or you ? your here watching I know that hurts right !! 🤙
💋💕💓
I wonder why chad just never lays a bead???
Here
like 38 !
#c.p.#learning #with#chad#Jolene! # Merci!
🐓in the🏠 Please Comments & HIT THAT 👍LIKE BUTTON
here
Monday bonus let's go join Chad fina queen Jolene
How to change wire in mig welder?
RTFM!
23 thousandths = .023
Do you need a licensed to buy gas for your welder
No
First and foremost remove all of the old wire.
🫵🏻😎👍🏻
I bet you squint when you buy a roll of that stuff
On next weeks addition, how to turn a mig on with step by step instructions 🤦♂️
says the guy that washes peoples cars.. haha you dick 🤙
I thought this was Jolene's gig rather watch her do something to watch then something that doesn't interest me
who cares..
boring
you said it 2 times your not limited say it 18 more times like a child 🤙 heres the way this works you clicked on the vid and watched it.. so yea you are responsible for your actions