How To | 2020 + | Hyundai Sonata | Battery Replacement |
HTML-код
- Опубликовано: 9 фев 2024
- www.buymeacoffee.com/Automoti...
Instagram @Automotive_Dysfunction
Support Us On PATREON: bit.ly/3qQsO07
Support Us On PAYPAL: bit.ly/3r4DPdJ
Tools Needed:
New car battery
Wrench or socket set
Battery terminal cleaner or wire brush
Anti-corrosion spray
Safety glasses and gloves
Step-by-Step Guide:
1. Safety First:
Ensure the vehicle is turned off and the key is removed from the ignition.
Wear safety glasses and gloves to protect yourself from any potential accidents or battery acid.
2. Locate the Battery:
Open the hood and locate the car battery. In the 2022 Hyundai Sonata, it is typically located in the engine compartment, either on the left or right side.
3. Identify Battery Terminals:
Identify the positive (+) and negative (-) terminals on the battery. The positive terminal is usually marked with a red cover or a "+", while the negative terminal is marked with a black cover or a "-".
4. Disconnect Negative Terminal:
Using a wrench or socket set, loosen and remove the nut on the negative (-) terminal. Once removed, carefully lift the negative cable away from the battery. This helps prevent accidental short circuits.
5. Disconnect Positive Terminal:
Repeat the process for the positive (+) terminal. Loosen and remove the nut, then lift the positive cable away from the battery.
6. Remove the Old Battery:
Use the appropriate tool to remove the battery hold-down clamp. Once the clamp is removed, lift the old battery out of the battery tray. Be cautious, as car batteries can be heavy.
7. Clean the Battery Terminals:
Use a battery terminal cleaner or a wire brush to clean any corrosion or residue from the battery terminals and cable ends.
8. Install the New Battery:
Place the new battery into the battery tray, ensuring it sits securely. Reinstall the battery hold-down clamp to secure the battery in place.
9. Connect Positive Terminal:
Connect the positive cable to the positive (+) terminal on the new battery and tighten the nut securely.
10. Connect Negative Terminal:
- Connect the negative cable to the negative (-) terminal on the new battery and tighten the nut securely.
11. Check Connections:
- Ensure both battery terminals are securely connected. Wiggle them gently to confirm they are snug.
By following these steps carefully, you should be able to successfully change the battery in your 2022 Hyundai Sonata. If you are unsure or uncomfortable with any step, it's always a good idea to consult your vehicle's owner's manual or seek professional assistance.
--------------------------------------TOOLS I OWN--------------------------------------
Oem strech belt tool : amzn.to/3JdT6Cp
30 Degree Push Pin Removal Pliers: amzn.to/3BlCx1K
Wheel Stud Installer amzn.to/2TQkstm
Stretch Belt Tool amzn.to/3e8bYVk
Gear Wrench 1/2 Socket Set amzn.to/3e6XDIv
Disposable Gloves amzn.to/3e3Bc6Y
Toyota/Lexus Oil Filter Tool amzn.to/3k6wuti
Vacuum Brake Fluid Bleeder amzn.to/3xzATZB
Gearwrench Ratcheting amzn.to/2Vm2kHU
7-Piece Spare Tire Retrieval Tool Kit amzn.to/2VlKWmE
Oil Filter Wrench Wrench Kit amzn.to/3ARUjLi
Oil Filter Pliers amzn.to/3yENJpo
Craftsman 1/2 Impact Sockets Set amzn.to/3e5z92e
Screw Driver Set amzn.to/3hYt5K5
Hand Impact Driver Set amzn.to/3yFdF48
Dual Piston Brake Caliper Push Tool amzn.to/3yJDe47
Wind Back Brake Caliper Tool Set amzn.to/3yKGlsJ
--------------------------------------------------------------------------------------------------------
If this video helped, let us know in the comments, and if you liked this tutorial, leave a like and subscribe fore more content like this! Thanks for watching!
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#howto #diy #Hyundai Авто/Мото
what size are the bolts? do you know which battery Hyundai recommends? will research it, but if you already know... lol
That's not a 2020 Sonata.