best mustang door panel video on you tube...i am replacing a damaged door with one i got from junk yard...i want to use my existing wire harness in my car...i am wondering if i will be able to fit harness through boot and hole in new door without removing connectors??? other then that i cant wait to get started...was lucky to find a perfect door no dents at local junk yard for $68....even window works really well compared to my old door which motor is about worn out..Probably the hardest part is switching the door lock cylinder...
roadstar499 yes. I did an entire door replacement awhile back. It was easiest to remove the fender as well and unplug the harness behind the fender that goes through the door as you said.
roadstar499 BTW I redid this door panel video on my Mach 1. Same thing, just a little cleaner since the last video was in the salvage yard ruclips.net/video/fY_4LHinxSg/видео.html
Danny Johnson replaced door on my 94 gt today...I switched the grey handle to my tan one..problem for some reason can't figure out how the spring for handle is be reinstalled...I tried everything to make it work...not one single video on that...only complete handle replacement that also requires drilling a pin...thanks
So I have a 1998 base v6, no Mach speaker, the driver side door panel pins have been broken, I can't find any replacements for 1998 but I have found a ton for 99-04, will they fit on the 1998 base v6?
Thanks for the video. Looks like a bad design, just like the Crown Victoria door panels. I wonder how many plastic fingers I will break on the one I am about to pull.
ab_mach1 yeah, possibly 6x9. For the mach audio system they are special speakers. You can tell by the letter Z on the back. It's actually a combination of a mini sub woofer. If you replace them with a regular speakers it will not sound the same
Step one... is the only step not making sense to me. Surely to God you prepped that speaker. I been trying for days and I'm pretty sure its gonna break if I ever get it off there
6 years put, and this video is still helping people.
Thank you sir. 👍🏼
Quick and simple , love the vid and helped so much , thanks 👍
Thanks for the walk through. Helped a lot.
Dave Smith glad it helped. Sorry it was a video from a junk yard.
What's the speaker size and the tweeter
You can also remove the panel around the door handle and it allows more room to remove the panel off the door itself
Done this so many times on sn95's and on foxes. Its not too bad
What size are the tweeter speakers ?
best mustang door panel video on you tube...i am replacing a damaged door with one i got from junk yard...i want to use my existing wire harness in my car...i am wondering if i will be able to fit harness through boot and hole in new door without removing connectors??? other then that i cant wait to get started...was lucky to find
a perfect door no dents at local junk yard for $68....even window works really well compared to my old door which motor is about worn out..Probably the hardest part is switching the door lock cylinder...
roadstar499 yes. I did an entire door replacement awhile back. It was easiest to remove the fender as well and unplug the harness behind the fender that goes through the door as you said.
roadstar499 BTW I redid this door panel video on my Mach 1. Same thing, just a little cleaner since the last video was in the salvage yard ruclips.net/video/fY_4LHinxSg/видео.html
Danny Johnson replaced door on my 94 gt today...I switched the grey handle to my tan one..problem for some reason can't figure out how the spring for handle is be reinstalled...I tried everything to make it work...not one single video on that...only complete handle replacement that also requires drilling a pin...thanks
Danny Johnson I managed to do it leaving fender on...it did take around 30 minutes to line it up though...
roadstar499 nice work!
Thanks, was missing the stupid HIDDEN screw right in the middle.
very helpful, thanks
Douglas Puckett Thanks for watching!
So I have a 1998 base v6, no Mach speaker, the driver side door panel pins have been broken, I can't find any replacements for 1998 but I have found a ton for 99-04, will they fit on the 1998 base v6?
Yes, I believe my friend has used an entire interior from 99-04 or her 98 and the door panels and everything matched up
Thank You Sir great info pulled my window back up
you help me thank you
Thanks for the video. Looks like a bad design, just like the Crown Victoria door panels. I wonder how many plastic fingers I will break on the one I am about to pull.
It seems they never care about things breaking ha ha
Would anyone know what size of bolt holds the window controls in?
I believe it’s the gold Phillips screw
Dang, I assumed the door speaker was a 6.5". What is that, typical Ford 6x8 size?
ab_mach1 yeah, possibly 6x9. For the mach audio system they are special speakers. You can tell by the letter Z on the back. It's actually a combination of a mini sub woofer. If you replace them with a regular speakers it will not sound the same
Step one... is the only step not making sense to me. Surely to God you prepped that speaker. I been trying for days and I'm pretty sure its gonna break if I ever get it off there
thnks it helped
Robert Gamino glad it was useful. Thanks for watching