Binging RUclips videos and woah and behold custom offsets hooked it up with an awesome video thank you for doing this during these troubling times guys 💯 you the real MVPs
Buying my first set of tires and rims for a 2013 f-150 (with leveling kit) but don’t know much about them. Anyone know the biggest tires I can fit with just a leveling kit?
Ive got a question....Can i modify my 2003 Ford Excursion to install the 10” Fabtech 4.0 kit you mentioned in this video??? What do you think it will take to make that happen? Thanks for you input.
If you are installing these lift kits to actually go offroading i will tell you one thing. Its partially about the lift height but offroading is mostly about ground clearance and axle clearance. These lifts lift your truck yes, but tire size changes your axle height. You can spend 3k$ or 100$ on a lift kit, but the axle height will still be the very close to the same clearance height.
Do you guys do Classic trucks because I see you guys only doing basically brand new trucks I’m restoring a 89 F150 4 x 4 and maybe do a 8 inch or 10 inch lift on the truck
I follow the rule of thumb that you should expect to pay just about a grand an inch for any decent lift in fact I even cheaped out and went with fox shocks and still have custom valved kings on my shopping list and that's just to keep the 2nd gen riding nice unless your ok with driving dump trucks
The Bulletproof 10 inch lift kit for my was almost 13,000 (not installed). . . . . . . . Looks like CO needs to update the suspension systems they offer.
Just found out today I can't run the 6inch RC kit that fits my 2020 GMC 1500, apparently RC says you can't run the kit with factory rims, I asked in the email if 2 inch spacers would make it for fine, they didn't really address that, just said nope OE rims don't fit, anyone know anything about that?
Phur Ion 🤘more parts . More metal ? I think a lot are made order only ?I’m looking into a 14” cause I wanna be cool lol cool =$$$ I need mine actually for bigger tires and clearance for mud n snow not the mall 🤘 n I can put tool boxes under the truck instead of the bed that might become useless any way 🤷🏻♂️😆 peace ✌️ yo
wow FTS is making so much profit if they charge that much for drop down kits. drop downs require soooo much less engineering/design from the manufacturer and making a drop down kit taller is just a matter of spending a few more bucks on quarter inch steel.
Id like to put maybe a 4" or 6" lift on my truck (2002 Ford f450 4x4 cab and chassis dually) but absolutely NOBODY makes a lift kit level kit NOTHING for my truck, unless someone knows somebody that can lead me in the right direction??
10000$ for a lift kit??? All I got to say for 10k it better come bolted to a truck already.... Just lifted my 74 Ford F-250 4x4 3" for 75.00 (and not a body lift) and I will take that truck any where these will go plus some places these can't go..... Plus I won't be broke and can afford gas money to go wheelin with.... I don't understand why anyone would pay that much money for a lift kit.....
wayne taylor well if you already can drop 75k on a pickup truck what’s another 11k to rip all the tuned suspension from the factory off to slap this kit on. Better off buying a base model 150 then adding this imo
@@the808rambla5 Right... honestly the cost aside, truck guys will always buy mods for anything ford or Chevrolet. But some things just dont make sense. My opinion... just my opinion.
Well these lifts are more than my entire truck
You guys should partner up with Any Level and start selling those.
If you want one send us an email to info@customoffsets.com and we can get one for you! 🤘🏼
Does it matter if the truck is diesel? Thanks 🙏🏽
That 15” lift kit for the tahoe is awesome. 😱Thank u for this video 🙏
Thanks for watching! 🙏🏻
You need to look at Carli, they are one of the top kits for "real" off-road set ups.
I also have a this or that question, off road Jeep jk or mudding Jeep cj?
Nate Nunn they all the same
Both are bum jeeps
TJ or Jl are the way to go
@Custom Offsets You guys need to open a shop here in Michigan, You would make a Killing!
We’re your neighbor in WI! Free shipping on wheels and tires to MI, btw...
Binging RUclips videos and woah and behold custom offsets hooked it up with an awesome video thank you for doing this during these troubling times guys 💯 you the real MVPs
Can yll do a video on highest possible lift you can do on a 1500 4th gen Ram without going custom? Thx
You can also check out the gallery to see what others did! Just leave suspension blank! Customoffsets.com/gallery
Well it may be 6:00 here but it’s 5:00 somewhere.
@Nate Nunn "What would Jimmy Buffett do?" "Funny you should ask Alan, I'd say, pour me something tall and strong.............its 5 o'clock somewhere"
@Nate Nunn I like your profile pic!
It was 5 in Texas
Good one I know that.
Which 2 only vehicles would you rather have. Ranger and raptor or RAM and challenger hellcat?
Buying my first set of tires and rims for a 2013 f-150 (with leveling kit) but don’t know much about them. Anyone know the biggest tires I can fit with just a leveling kit?
Check out the gallery to see what you can fit! Just leave wheels and tires blank! Customoffsets.com/gallery
The dog is living a great life.
Do a cheapest version of this
"Rough Country.... alright guys thanks for watching"
@@deaddad6310 zone
@@reaganriddle u rite
Nice to see you’re finally carrying icon dynamics.
Ive got a question....Can i modify my 2003 Ford Excursion to install the 10” Fabtech 4.0 kit you mentioned in this video??? What do you think it will take to make that happen? Thanks for you input.
Shoot us an email to info@customoffsets.com so an expert can help you man! 🙏🏻
If you want big dollar and heavy duty go with Stryker Offroad with the hydraulic adjustable shocks.
Nun of those are level where I live. (Australia)
Do you guys not do any of the Kelderman stuff? I’ve heard they are stupid pricey
If you are installing these lift kits to actually go offroading i will tell you one thing. Its partially about the lift height but offroading is mostly about ground clearance and axle clearance. These lifts lift your truck yes, but tire size changes your axle height.
You can spend 3k$ or 100$ on a lift kit, but the axle height will still be the very close to the same clearance height.
Well you usually buy lift kits so you can put bigger tires on there, that's kinda the whole point lol.
If I want to fit 20x12’s on my GMC Sierra 1500, what size lift kit should I get?
Cole McKay 6-8”
Check out the gallery and leave suspension blank to see what others did! customoffsets.com/gallery
Do you guys do Classic trucks because I see you guys only doing basically brand new trucks I’m restoring a 89 F150 4 x 4 and maybe do a 8 inch or 10 inch lift on the truck
I follow the rule of thumb that you should expect to pay just about a grand an inch for any decent lift in fact I even cheaped out and went with fox shocks and still have custom valved kings on my shopping list and that's just to keep the 2nd gen riding nice unless your ok with driving dump trucks
Hey I have a good idea for you guys channel. Do best cheap suspension
Can someone tell me where I can get a 8” or bigger lift kit for a 2013 ram 1500 4wd
What about Carli?
We want longer videos
Where can I find a 8.5” McGauphys kit for my 14 f150?
Shoot us an email to info@customoffsets.com to see if an expert can help find one for you! 🙏🏻
Custom offsets don’t carry much for the pre 2000s Ford F-350 4x4 all I seen was rough country leaf springs NO coil over conversions or 4 links
The dog is living the life...
@custom offset where can I find more info on that white superduty in the beginning?
You can find it right here! bit.ly/2xHtttt
Custom Offsets thank you
The Bulletproof 10 inch lift kit for my was almost 13,000 (not installed). . . . . . . . Looks like CO needs to update the suspension systems they offer.
will these give me more suspension travel too?
Just found out today I can't run the 6inch RC kit that fits my 2020 GMC 1500, apparently RC says you can't run the kit with factory rims, I asked in the email if 2 inch spacers would make it for fine, they didn't really address that, just said nope OE rims don't fit, anyone know anything about that?
Shoot us an email to info@customoffsets.com so an expert can help you with that! 🙏🏻
Y'all should do a long video
What's your thoughts on Cognito lift kits?
Great kits, Cognito makes some stellar lifts man!
Well ig that I need to start on my Jeep now
What about an any level lift kit?
Easten Jacobson they're like 15k
I’ll stick with the basic kit 4/2 lift
Just ordered my set of wheels on tires off custom offsets. Love your brand and content keep it up 👌👌
Thank you for your support!
Why did you skip the avalanche at 4:28 made me sad cause i have one haha just messing witchya
lmaooo "um escalade''
Lol that was lacey blairs escalade. Not an avalance 🤦♂️🤦♂️
what about wicked customs lift ?
What about the custom mega mud truck kits
F150 raptor or ranger raptor?
Why do lifts get so expensive over 6"? Like you can get a 6" lift for 1000, 8" for 2000, and 10" for 7000? What about that extra 2 inches costs 5000?
Phur Ion 🤘more parts . More metal ? I think a lot are made order only ?I’m looking into a 14” cause I wanna be cool lol cool =$$$ I need mine actually for bigger tires and clearance for mud n snow not the mall 🤘 n I can put tool boxes under the truck instead of the bed that might become useless any way 🤷🏻♂️😆 peace ✌️ yo
WS1 AUTO’S N STUFF ; idk who told you it was okay to text like that, but I just got cancer
Phur Ion how much would you pay to be 2more inches lol
Can a Ram2500 lift kit fit in a Ram1500, I’m new to this and I can’t find the lift I want for my truck
We recommend only using lifts made for your specific truck! Search here! customoffsets.com/suspension
Hook me up with a 6" lift on my Ram 1500 , pro bono 😃
Check out our lifts here! customoffsets.com/suspension
We have some great deals going on right now! 🙏🏻
Oh wow. I would of thought Bulletproof Suspension would be a kit that you guys would offer with a hefty price.
Do you guys do kelderman lift kits
Email us at info@customoffsets.com so we can check into it! Thanks! 🙏🏻
Oh yeah well i got a puck leveling kit and runnin 33s yooooooooo
Imagine paying $7k for 15” spacers
wow FTS is making so much profit if they charge that much for drop down kits. drop downs require soooo much less engineering/design from the manufacturer and making a drop down kit taller is just a matter of spending a few more bucks on quarter inch steel.
I was thinking the same thing people just spending tons of money on literal garbage
For me...fts = fuck that shit. Lol
I’m just trying get a anylift
All these trucks should be sent to WhistlinDiesel. He takes good care of all his trucks.
Id like to put maybe a 4" or 6" lift on my truck (2002 Ford f450 4x4 cab and chassis dually) but absolutely NOBODY makes a lift kit level kit NOTHING for my truck, unless someone knows somebody that can lead me in the right direction??
Shoot us an email to info@customoffsets.com so an expert can try to help!
Have u looked at kelderman lift kits.
Comparing a long travel suspension kit to a bro dozer bracket lift kit is apples to oranges.
What about 8in for 2018 none XD Nissan Titan
AnyLevel?
Oh my Jesus my s10 was only 3700! Holy f**k
Its crazy because the ones i see fucking up the most are these expensive ass lifts. Causing wrecks and shit
You should do a video in your garage in front of your drift car.
Good idea! 👀
The FTS 15” lift is so rediculous overpriced
Why lift 15 inches then drop clearance back to stock angles..
well so i finally learned how to pronounce mcgaughys
Was hoping to see a kit for performance, not show.
That stimulus cash burning a hole in yo jeans?
Derrick Archibeque 👍paying bills here 👍 married with children
You forgot to mention bulletproof suspension
You forgot any level lift.
Bullet proof, Kelderman?
Definitely up there!!
"Let's start with our cheapest lift kit" damn near 7k....🤦🏽♂️ in think I'm on the wrong video 🤣🤣
😂😂
Cheapest of the more expensive side bud..
What da dog doin
& i thought my 3,8k kit was expensive...
shit that is lol levels to this i guess
Hi
Can someone explain why anyone should ever disbands I’d you can’t afford it you probably shouldn’t have it...
That ICON lift is useless outside of the desert
BaggedF100 nah not if your driveway is full of pot holes. I’d say all the others are useless out side of mall parking lot
10000$ for a lift kit??? All I got to say for 10k it better come bolted to a truck already.... Just lifted my 74 Ford F-250 4x4 3" for 75.00 (and not a body lift) and I will take that truck any where these will go plus some places these can't go..... Plus I won't be broke and can afford gas money to go wheelin with.... I don't understand why anyone would pay that much money for a lift kit.....
1 is To many Ads I know tight. I'm thinking about my old Ford. 100 bucks and some hockey pucks.
How can I lift mine for $75?
Y'all need to stop with the 0% thing. It's a fallacy, affirm still wants 25% on damn near every order.
They do offer as low as 0% financing for those who qualify! 🙏🏻
Mall crawlers
No Carli or Kelderman kit? Lazy ass reporting! You can do better...
💰💰💰💰💰
Thanks I'll pass, keep it
"O-Riginal" 🤣 🚜..🚜..🚜..
How can you go wrong?
🛴
Only ford guys will pay 11gs for 3 inches. Lmao
wayne taylor well if you already can drop 75k on a pickup truck what’s another 11k to rip all the tuned suspension from the factory off to slap this kit on. Better off buying a base model 150 then adding this imo
@@the808rambla5
Right... honestly the cost aside, truck guys will always buy mods for anything ford or Chevrolet. But some things just dont make sense. My opinion... just my opinion.
Second
FTS ugly ugly cross member. MCGAUGHYS has the best looking cross member. I like COGNITO lift kits
74th like
first here
Anyone going above a 3" (maybe a 4") is an idiot.. Unless you are actually building a show car. It will still be an ugly show car but oh well 😂
Do you live with your mom? No shame, just curious.