Buddy you've got a lot of room for upgrades with this sub, I have the same vxf and I'm feeding 4-5k to each one and as long as it's clean power they take it no sweat! If you saw how much excursion my subs have when I'm slappin em you'd realize yours isn't even barely moving yet lol
I got the same sub, same Q-Bomb box with a 1500.1 Memphis amp and watching your video exactly 1 year after you posted haha, I guess it was meant to be!! HELL YA this sub is BEAST!!
I had same truck on 2 vxf12s on a bass8k ran it at .5ohm. Clamped 5700 watts. Tuned to 34hz. 1.8cubes per sub after displacement. 60 Sq. Inches of port. Had major box rise. That rp1500 is prob only clamping around 250watts at the enclosures peak. If all you can wore down to is 1ohm. I would slap a 5k on that one sub and let her eat. Although like me you will need a bunch of electrical. I ran a mechman 320 alt and dual runs of 2/0
Thats awesome 👌... I have the rp 1500.1d also I'm running @ 1ohm with a skar evl 10" but I wanted to get a vxf-12 - 2 and run it @ 1ohm also. Thanks for the video I'm going to buy it for sure 🙂
I didn't take the tyme to sand my box for my two 15, same speakers ported box, turned around and bought a sealed box. I'm most definitely sanding tht q-bomb box now.
Yooo!!! I just rewatched your video again bro!.. Man, what you got installed right now really is done nicely but if you get that sub in a custom built enclosure you'll swear it's not the same sub!.. Now with all that being said.. What is the name of that song and artist?.. that jam hammers on them lows and that's what I love!. Can't wait to get my two VXFs installed
I have the same sub with a Hifonics Zeus 1200w amp (temporary) & it bumps hard but the VXF 15 is really pushing the amp lol I got 4 gauge wiring but need a Taramps 3000w amp & 0 gauge wiring
All these people telling you to run 0 gauge wire are speaking in generalization. I had that same amp and it will not accommodate 0. 4 is good as long as you are running quality wire and not a cheap install kit.
You gotta get that thing moving bud, these VFX 15s are super under rated. I was running 3 of them but I'm down to 2. I'm setting up for 4 of them and I'll have them on two RP-4500.1 amps.
I’ve repositioned my box to the floor of the backseat with the port facing into the cab and the sub up firing for better air space for it to breathe , and now it’s ridiculous lol. Windows rattle and the windshield wipers bounce around 🤣
1.run some 0g 2.that amp is not putting out 1900 in your vehicle .maybe 1300w..less after rise.hopfully no bass boost on 3.no that q bomb box is not good for that sub .build a custom box.
Buddy you've got a lot of room for upgrades with this sub, I have the same vxf and I'm feeding 4-5k to each one and as long as it's clean power they take it no sweat! If you saw how much excursion my subs have when I'm slappin em you'd realize yours isn't even barely moving yet lol
What alt you got?
@@andrewgage4485 mechman 320a
@@kevinAuman1 and shortly after that bye bye sub lol
I’m getting the rp3500 amp to push a vxf 12 do you think I could just get an XS power battery?
@@andrewgage4485 I got the same amp for the vxf 15. Also Wondering what battery I should get...
I got the same sub, same Q-Bomb box with a 1500.1 Memphis amp and watching your video exactly 1 year after you posted haha, I guess it was meant to be!! HELL YA this sub is BEAST!!
I had same truck on 2 vxf12s on a bass8k ran it at .5ohm. Clamped 5700 watts. Tuned to 34hz. 1.8cubes per sub after displacement. 60 Sq. Inches of port. Had major box rise. That rp1500 is prob only clamping around 250watts at the enclosures peak. If all you can wore down to is 1ohm. I would slap a 5k on that one sub and let her eat. Although like me you will need a bunch of electrical. I ran a mechman 320 alt and dual runs of 2/0
Bru that shi is too much
@@bigonetv7807 never to much
Another note on the q bomb enclosures they are tuned a little high if you extend the port they hit lower frequencies and you get a cleaner sound
That big boy is kicking! But I have to agree with other dude upgrade to zero guage and she's done. Good job
GET THE CAB-22 ITS ONLY $249 and it shows pushing 5716w at .5 ohm , there is a video dyno but for that price can't beat it
Thats awesome 👌... I have the rp 1500.1d also I'm running @ 1ohm with a skar evl 10" but I wanted to get a vxf-12 - 2 and run it @ 1ohm also. Thanks for the video I'm going to buy it for sure 🙂
How was it
Yes sir that sub can handle a lot more power
Sounds good 💯
I didn't take the tyme to sand my box for my two 15, same speakers ported box, turned around and bought a sealed box.
I'm most definitely sanding tht q-bomb box now.
I'd point that port at the windshield, it'd make the acoustics better...
If you ground to frame make sure your cabs grounds upgraded too
Nice setup bro should've went with 0 gauge all the way threw
The amp only has 4 gage in puts
@@Ace-bk9yg can use a 0 to 4ga adapter
I have dual 0 guage going to my rp 1500 and a 370 amp alternator
Nice,real songs instead of crappy bass tones,lol
Bet Korn sounds real good🤘🏼🤘🏼
The video helped a lot thank you
Yooo!!! I just rewatched your video again bro!.. Man, what you got installed right now really is done nicely but if you get that sub in a custom built enclosure you'll swear it's not the same sub!.. Now with all that being said.. What is the name of that song and artist?.. that jam hammers on them lows and that's what I love!. Can't wait to get my two VXFs installed
Country boy arron lewis
I got the exact same box and sub except ima run a 2000 watt amp with 0 guage
That exactly what i did, watching this as im trying to figure out how to get 2 to the uk
I have the same sub with a Hifonics Zeus 1200w amp (temporary) & it bumps hard but the VXF 15 is really pushing the amp lol
I got 4 gauge wiring but need a Taramps 3000w amp & 0 gauge wiring
Whats the best settings on the gain lpf and subsonic on this setup
A VXF will take more power than what you have on it.. Nice setup but you're only tickling that sub..
Nice
Not really shy of 1100w cuz that's max not rms.RMS they are 1,500w
All these people telling you to run 0 gauge wire are speaking in generalization. I had that same amp and it will not accommodate 0. 4 is good as long as you are running quality wire and not a cheap install kit.
I always run O to a 4 gage block. definitely if running multiple amps or like me a power inverter.
What's your amp settings
Was it just the big three upgrade that you did on your electrical system?
Yessir that’s all I did
What amp alt is in there?
What box is that?
♠️
Where did you find this song?
Hi what's the break-in process
You gotta get that thing moving bud, these VFX 15s are super under rated. I was running 3 of them but I'm down to 2. I'm setting up for 4 of them and I'll have them on two RP-4500.1 amps.
Nice... WHAT SONG 🎵 IS THAT PLAYING MY FRIEND???
I'm about to get rid of my evl18 and go two vxf15.
I think 2 vxf 15s is my perfect dream system. Tuned low and with proper electrical.
Thanks
You should run 0 guage
This setup smacks way harder now than in this video because it’s 100% broken in. I can’t imagine running 0 gauge now 🤣 that would be crazy
Definitely need to run 1/0 you will be a lot better off
@@jovansoleil why run 0 gauge when skar says to use 4 ga and even sells a wire kit made for a 1500 w amp
@@danvird8649 true and the amps power terminals arent sized to 0 gauge anyways
@@danvird8649 why do the big three if you’re not gonna allow the current to flow efficiently to the amp.
Deeep bass 😎😎💪🏻
Does it shake ur truck
I’ve repositioned my box to the floor of the backseat with the port facing into the cab and the sub up firing for better air space for it to breathe , and now it’s ridiculous lol. Windows rattle and the windshield wipers bounce around 🤣
I like 👍it
Update?
1.run some 0g
2.that amp is not putting out 1900 in your vehicle .maybe 1300w..less after rise.hopfully no bass boost on
3.no that q bomb box is not good for that sub .build a custom box.
The scar amp. 1500.1d won't take wire larger than 4 gauge. The terminals aren't large enough
Look up Jim's machineworx. He sells reducers for a reasonable price.
What’s your box tuned to
42 I believe , I sold this a while back
You should be running 1/0 wire!!!
the 1500.1d amp won't take wire larger than 4 gauge
@@christianvarenhorst107 try a wire reducer
Song
Why are you using db on amplifier thats nooby
🔴🔶◽️◾️
Do not push 3000 to that sub 1500 is the rms peak doesn’t really matter
I've got a sundown audio 3 k, waiting on a 15. You say I'll end up smoking it? Lol
Sifteen
How do you wire it to 1 ohm I don’t know nothing ab wiring
Red on red black on black
depends on if you’re wiring it in series or parallel. google it
4 gage is fine for that small of an amp, its a foot thing.
First off I have same sub in 5k at 2 ohms and I a good bud and d0 147s on music
what box is this?
It's a Q bomb. I mean it's alright tuned kinda high TBH bc I had that box one my old 15
Do not buy those high tuned garbage boxes! If you want a nice prefab buy one from down 4 sound. Great low tuned bed lined boxes rated for 3000 RMS
@@mrswagjumper8806 just modify the port all u do is ad wood to port to tune it lower thats what I did now my qbomb is at 35hrz it was 45 lol