I don't get it... what notes? Don't get me wrong this is a cool mod albeit an obvious one that everyone is already doing on their own but it also took away some articulation, though this fig already lacks good articulation in a lot of departments.
Some toy companies do floating shoulder pads on the same set up. They attach the shoulder pad to a flat piece that is tab that hang out from the butterfly joint and is round on the one end that it fits flat against where the arm and butterfly peg in, then out of that round flat bit with the whole in the middle is the tab. Like a donut shape with a single tab that comes out that the shoulder pad is glued or pegged onto. This allows full freedom of movement with the arm and shoulder pad.
Did something similar on mine on my figure page, but added an back elastic strap to the top and glued it flush to the black shoulder cap, so that it doesn’t hinder any articulation and moves with the arm movement as well
@@D.A.I.K.I. that sounds like a great technique. I was hesitant to glue anything to the black shoulder cap because I feel like I want to switch back and forth from a shoulder pad look to the look without them
For the boots, I recommend heating and popping the boots off, trim away as much plastic as you see fit, then some screws, glue them in, hollow the boots out, fill them with hot glue, then drill a hole about as wide or slightly less wide as the screws, and then place them in. I don’t know how well I’m describing this process, but I hope you can get the general idea. This’ll not only fix the disproportional legs, but give you boot rotation.
I honestly really want that, I saw someone made it from a gi joe figure but I don’t know if it’s possible to swap the legs from wolverine to the gi joe figure to get a proper look
@@ScottsStuff14 I’m waiting to for this to be more available before I try anything, I already need a better painted masked head since the beard is off centered on mine
The suit should have been the most perfect comic Accurate suit if he keep the Shoulder pads don't get me wrong the suit was great but it could have been perfect I'm still glad we finally got the yellow and blue suit instead of "black leather" again
Oh man I have so many ideas for this figure, you are definitely on the right track, I just want to find a better shoulder option to continue the stability and range, not the shoulder pad what I would do is glue the pad to a extra shoulder piece from a BSSW that has the ring that goes around the peg shaft, that way it moves completely with the arm, similar to how the X-Men 97 Wolverine, but why stop there I have more plans once I find one to give him ankle swivel, and better torso proportions, it will be a completely new figure once I get this new figure lol, keep these videos coming your the only one posting so far so thank you!!!
If you have the comic Wolverine figures, you see the shoulder pads have legs that plug into the front and back of the shoulder ball. Maybe you can add pegs of some kind to the ends of this Wolverine’s shoulder pads, drill holes in both the shoulders of the bare arms and sleeved arms (likewise trim away the block on the sleeve arms’s shoulders to make room), and then you’ll be able to swap them easier.
Heat shrink? Like the stuff people use on cables? I'd like to try this mod but my big concern would be the loose shoulder peg. Is there a good video on this? I can't find anything
@@fortressmattimus3984 yes, I’ve only used it a couple of times on my WWE figures, but Xcorpeo here on RUclips has a few shorts that include a heat shrink peg mod. You should check out his channel
Really looks great! But I’m not good at tinkering… I’ll have to settle for the yellow suit as is. If I break and ruin mine (when it shows up in December). But by then, they’ll have a sleeveless version lol.
@@GenesGems thank you! It’s a great figure straight out of the box so you will enjoy it when it comes in and then we all will patiently wait for the inevitable official sleeveless version
I do think he looks great with the shoulder pads and no sleeves, but I think in the movie, he didn’t have shoulder pads when he was sleeveless.. regardless nice job!
I saw someone else on another channel use the legacy collection Logans arms to do this mod. Pretty cool stuff.. of course Haslow is going to hallow and make one and some of us will buy it. 😆 🤣 😂
@ScottsStuff14 I mean most of us are. I'm not going to spend my time fiddle fuckin with altering arms and removing stuff from other figures to make the ultimate figure. I just don't have Patience for that sort a thing. Love to see others work though. Y'all are gifted at your craft if you can paint and modify like this.
@@Sith_Destroyer66 that’s my favorite set of Logan heads, especially the gritting teeth one. Tonight I’ll make a short showcasing all the different heads
There's a 3rd party company making bare arms for this figure already and with these being connected to the body with simple McFarlane style ball joints I can see a few different 3rd party companies making arms for this figure!
You should’ve used the arms from the Cavillrine figure on this wolverine and put these arms on the Cavillrine figure. Basically an arm swap. That’s what I did and the arms are better.
I JUST WANTED TO ASK THAT THOSE SHOULDER PADS ARE NOT THAT WEAK THAT THEY WILL BREAK OFF JUST LIKE THAT ON THE ORIGINAL ARM COZ YOU PULLING/TEARING OUT HAS PUT DOUBTS IN MY HEAD IF THEY ARE STRONG ENOUGH GLUED AND HIGH ABOVE THE SHOULDER ON THAT RECTANGULAR PEG THAT THEY WON'T JUST SIMPLY BREAK OR RIP OFF AND BY ONLY USING WARM WATER ONE MIGHT BE ABLE TO DO THAT ?
@@rajsharma2283 they are very flimsy and rubbery, but it’s not like a hard brittle plastic that would chip. You just have to careful and take your time separating them from the peg they’re glued to. I only did this last night so I’m unsure of their long term durability, but I think if you glued them in place they wouldn’t tear unless you were intentionally trying to rip them
@@_thebatman I do have another pre-ordered Wolverine that should be here in the next couple of days so I’ll try to adjust my setup to be able to show that process on camera
@@dongarces8570 gotcha! I can’t make any guarantees but I will look up the figure and maybe in the new year I can get it. Thank you for the suggestion!
everyone acting the fool with the hasbro hate comments plus a whole shoulderpad video without the mask head😢. maybe I missed it but why not glue the pads to the butterfly joint since it looked like there was enough space there. doing away with the full 360 on the arms and just rotating the shoulder would've been acceptable.
@@RAMSES-eh1if I didn’t want to glue the shoulder pads to the butterfly cap because I still want to switch out between the different looks: sleeves with pads, no sleeves no pads, and this no sleeves with pads
Really wish in the Movie they kept the shoulder pads when he went sleeveless. I don't understand why he had sleeves in the first place. Most wolverine suits in the comics, he hardly ever has sleeves.
YES THE SHOULDER PADS 😭🙏 thank you
@@Sag3g I’m glad you like it!
hasbro taking notes from this guy
@@FiguretronicsIN I was taking notes from other people before this so hopefully Hasbro has a full notebook by now
@@ScottsStuff14but still Hasbro suck at wht thy do the best
I don't get it... what notes? Don't get me wrong this is a cool mod albeit an obvious one that everyone is already doing on their own but it also took away some articulation, though this fig already lacks good articulation in a lot of departments.
@@JeffZ1028 more so Hasbro take note that people really want the sleeveless look
“But @@ScottsStuff14; how ever will Hasbro get SUCKERS… ahem!!! I mean collectors to buy twenty different variations of the same figure?”
Now THIS is what I like. Good stuff my dude.
@@Beardalorian thanks man!
Some toy companies do floating shoulder pads on the same set up. They attach the shoulder pad to a flat piece that is tab that hang out from the butterfly joint and is round on the one end that it fits flat against where the arm and butterfly peg in, then out of that round flat bit with the whole in the middle is the tab. Like a donut shape with a single tab that comes out that the shoulder pad is glued or pegged onto. This allows full freedom of movement with the arm and shoulder pad.
@@currentuser2 this would be the ideal setup. I wish this is how it was designed to begin with, instead of just part of the shoulder
Did something similar on mine on my figure page, but added an back elastic strap to the top and glued it flush to the black shoulder cap, so that it doesn’t hinder any articulation and moves with the arm movement as well
@@D.A.I.K.I. that sounds like a great technique. I was hesitant to glue anything to the black shoulder cap because I feel like I want to switch back and forth from a shoulder pad look to the look without them
For the boots, I recommend heating and popping the boots off, trim away as much plastic as you see fit, then some screws, glue them in, hollow the boots out, fill them with hot glue, then drill a hole about as wide or slightly less wide as the screws, and then place them in.
I don’t know how well I’m describing this process, but I hope you can get the general idea.
This’ll not only fix the disproportional legs, but give you boot rotation.
@@brandonnetwork this is very helpful! Thanks for sharing, I’ll hopefully be able to work on that leg soon
Looks great, I also asked in the previous video about the Shoulder Pads.
@@rashidhumine thank you for suggesting that. I know a lot of people were interested in the look so I gave it a try
Like a Prayer shirtless oiled up version next? 😂 Great video bro
I honestly really want that, I saw someone made it from a gi joe figure but I don’t know if it’s possible to swap the legs from wolverine to the gi joe figure to get a proper look
@@jfp420 haha thank you! I’ll put that version on my to-do list
@@Cornholio174 I think it’s an idea worth me looking into. I’ll check and see what others have done first
@@ScottsStuff14 I’m waiting to for this to be more available before I try anything, I already need a better painted masked head since the beard is off centered on mine
The suit should have been the most perfect comic Accurate suit if he keep the Shoulder pads don't get me wrong the suit was great but it could have been perfect I'm still glad we finally got the yellow and blue suit instead of "black leather" again
@@Tamijaygallow you’re spot on with that
Oh man I have so many ideas for this figure, you are definitely on the right track, I just want to find a better shoulder option to continue the stability and range, not the shoulder pad what I would do is glue the pad to a extra shoulder piece from a BSSW that has the ring that goes around the peg shaft, that way it moves completely with the arm, similar to how the X-Men 97 Wolverine, but why stop there I have more plans once I find one to give him ankle swivel, and better torso proportions, it will be a completely new figure once I get this new figure lol, keep these videos coming your the only one posting so far so thank you!!!
@@Gambitjordan that’s the fun of it! Let me know how your customizing goes once you start it. I appreciate the comment!
I took 2 DAYS for this to show up on my subscriptions page!
@@brodybrody-eq2om I don’t know why RUclips is like that sometimes
Nice on the old man hawk eye body in the back I did the same exact thing, head and all
Great minds think alike!
What if Hasbro announces a sleeveless version tomorrow at London Comic Con?
He won’t need to buy it
@@Flight-of-Life I guess it would be bittersweet but I would just put the yellow arms back on
You are really good at this
@@damajewiggins3432 I really appreciate that!
@@ScottsStuff14 you’re welcome
This is awesome and he looks like Wolverine from the 90s cartoon/97 cartoon.
@@jasongradyphstiger6179 thank you! That’s my favorite look for Wolverine so I had to try to emulate it
@ScottsStuff14 I know you did a amazing job.
That looks Soo good. Now it just needs a wash to make him look dirty 😅
@@FlipMamba I seen a few people do a dark wash on this figure and it looks great. I may need to try it
If you have the comic Wolverine figures, you see the shoulder pads have legs that plug into the front and back of the shoulder ball.
Maybe you can add pegs of some kind to the ends of this Wolverine’s shoulder pads, drill holes in both the shoulders of the bare arms and sleeved arms (likewise trim away the block on the sleeve arms’s shoulders to make room), and then you’ll be able to swap them easier.
@@brandonnetwork that’s very interesting, I could probably make something like that work. I need to examine my 97 Wolverine and look at those tabs
Got mine at BBTS. can't wait to try this mod
@@coryt2018 I hope you enjoy the figure! Good luck on your customization
Looking great!
@@ramukagurama9040 thanks!
Heart shrink on the pegs mayne
@@Wepaonxi I need to go ahead and do that. Tape is quick fix first step, but now I need to move forward
Heat shrink? Like the stuff people use on cables? I'd like to try this mod but my big concern would be the loose shoulder peg.
Is there a good video on this? I can't find anything
@@fortressmattimus3984 yes, I’ve only used it a couple of times on my WWE figures, but Xcorpeo here on RUclips has a few shorts that include a heat shrink peg mod. You should check out his channel
@@fortressmattimus3984 yea at the end of the peg use a lighter it shrinks pop in and it holds I did it for my blade arm swap
@@Wepaonxi You put the heat shrink on the shaft of the peg or on the ball part?
Looks amazing maybe you can use elastic strap from a Facemask
@@MatthewVasquez-mt2se that’s a good idea, I’ll look into that
GENIUS!
@@igorguimaraes7238 haha thank you!
You smart as hell
@@bullymaguire22 haha thanks!
Really looks great! But I’m not good at tinkering… I’ll have to settle for the yellow suit as is. If I break and ruin mine (when it shows up in December). But by then, they’ll have a sleeveless version lol.
@@GenesGems thank you! It’s a great figure straight out of the box so you will enjoy it when it comes in and then we all will patiently wait for the inevitable official sleeveless version
Now I want to get two of this figure to make one with no sleeves… damn. $$$
@@TJB84 the wallet is never safe in the action figure world haha
What about mini rubber bands those black hair tie ones, for the shoulder pads
That’s a good idea! I’m sure my wife has some laying around I could try out
An elastic band would have work a lot better
@@Boogie1328 I think so too, I just didn’t have any on hand. I’m going to track some down now
Dope.
@@r.davidhill7639 thank you!
All these Hasbro layoffs. Maybe now the can hire guys like YOU to make figures we deserve.
@@Beardalorian idk man, I’m not sure if that’s the industry I want to get into right now lol
@@Beardalorian idk man, I’m not sure if that’s the industry I want to get into right now lol
@@ScottsStuff14 You're definitely talented and can think on your feet to get the look you want. So mad respect.
I do think he looks great with the shoulder pads and no sleeves, but I think in the movie, he didn’t have shoulder pads when he was sleeveless.. regardless nice job!
@@TJB84 I appreciate it! Yeah I’m trying to decide between the two looks at the moment
I saw someone else on another channel use the legacy collection Logans arms to do this mod. Pretty cool stuff.. of course Haslow is going to hallow and make one and some of us will buy it. 😆 🤣 😂
@@thorgotem they always sucker me in like that so I’m one of those people lol
@ScottsStuff14 I mean most of us are. I'm not going to spend my time fiddle fuckin with altering arms and removing stuff from other figures to make the ultimate figure. I just don't have Patience for that sort a thing. Love to see others work though. Y'all are gifted at your craft if you can paint and modify like this.
@@thorgotem yeah man I totally get that, I appreciate you showing love though!
How would it lookbwith the 20th anniversary amazon exklusive wolverine head?
@@Sith_Destroyer66 that’s my favorite set of Logan heads, especially the gritting teeth one. Tonight I’ll make a short showcasing all the different heads
You are perfect at making customs
@@Jaydenstoy I appreciate that man! I’m trying things out and sharing it
@@ScottsStuff14 you are so good at making customs to the point they look like real released action figures
@@Jaydenstoy that’s high praise! Thank you
@@ScottsStuff14 anytime man😃
There's a 3rd party company making bare arms for this figure already and with these being connected to the body with simple McFarlane style ball joints I can see a few different 3rd party companies making arms for this figure!
Do you have a link?
@@scottmcclary594 I preordered the maniple one but I couldn’t help but go ahead do this arm swap
@@tundak630 I preordered a set by manipple studios on onesixthkit.com
Thanks dude!
@@CleverUsername7689 you’re welcome!
Hasbro should hire you man
@@aaronherrera9159 I wouldn’t go that far haha. I’ll do some consulting on the side though
I'll be lucky enough to get one, let alone not mess it up trying to do something like this 🤣
@@fishingguy7 hopefully this Wolverine will start hitting retail stores soon and won’t be too difficult to get
You should’ve used the arms from the Cavillrine figure on this wolverine and put these arms on the Cavillrine figure. Basically an arm swap. That’s what I did and the arms are better.
@@darthtater6543 now when you say Cavillrine are talking about the tank top Logan figure? I agree those arms do look good
@@ScottsStuff14 Yes, the one you had in the background but the takntop version
Show him with the helmet head to complete the look
@@kyoufuwooshieteyarou7206 yeah I realize I didn’t actually show that look in the video, but I did post a short that shows both heads
I JUST WANTED TO ASK THAT THOSE SHOULDER PADS ARE NOT THAT WEAK THAT THEY WILL BREAK OFF JUST LIKE THAT ON THE ORIGINAL ARM COZ YOU PULLING/TEARING OUT HAS PUT DOUBTS IN MY HEAD IF THEY ARE STRONG ENOUGH GLUED AND HIGH ABOVE THE SHOULDER ON THAT RECTANGULAR PEG THAT THEY WON'T JUST SIMPLY BREAK OR RIP OFF AND BY ONLY USING WARM WATER ONE MIGHT BE ABLE TO DO THAT ?
@@rajsharma2283 they are very flimsy and rubbery, but it’s not like a hard brittle plastic that would chip. You just have to careful and take your time separating them from the peg they’re glued to. I only did this last night so I’m unsure of their long term durability, but I think if you glued them in place they wouldn’t tear unless you were intentionally trying to rip them
they'll re-release this sleeveless a year from now after everyone's customized their figure.
@@raymundomacias9396 tbh I’m good with that! We’ll get the enjoyment with this custom for as long as we can lol
Hey bro could you make a tutorial of how to take off the bracelets without any damages
@@_thebatman I do have another pre-ordered Wolverine that should be here in the next couple of days so I’ll try to adjust my setup to be able to show that process on camera
@@ScottsStuff14THANK YOU SO MUCH!!
@@_thebatman no problem! I’ll come back to this comment and let you know when I do make that video. Hopefully my other preorder comes in soon
@@_thebatmanIf you still need to see how get the gauntlets off I’m uploading a video showing that today
I appreciate the work but Hasbro will release the version with the arms showing, eventually/battle damage.
@@planetnef2356 no doubt about it
Can I just buy yours? I would for sure break something if I tried to do this
@@mrantmoney1 well this one isn’t for sale but that doesn’t mean I won’t make more in the future!
Hey Scotts, can you please try out the Amazing Yamaguchi bootleg? I have it and it's pretty good.
Edit: not forcing you
@@dongarces8570 which one specifically? I’ve heard there’s a few out there. That would be an interesting video to do
@ oh, the Series No.005 version.
@@dongarces8570 gotcha! I can’t make any guarantees but I will look up the figure and maybe in the new year I can get it. Thank you for the suggestion!
@ thank you so much too!
@@ScottsStuff14and make sure you get the Wolverine one.
everyone acting the fool with the hasbro hate comments plus a whole shoulderpad video without the mask head😢. maybe I missed it but why not glue the pads to the butterfly joint since it looked like there was enough space there. doing away with the full 360 on the arms and just rotating the shoulder would've been acceptable.
@@RAMSES-eh1if I didn’t want to glue the shoulder pads to the butterfly cap because I still want to switch out between the different looks: sleeves with pads, no sleeves no pads, and this no sleeves with pads
Can I buy this from you??
@@joshuanash5238 this one is for my personal collection, but I may make another in the future
Really wish in the Movie they kept the shoulder pads when he went sleeveless. I don't understand why he had sleeves in the first place. Most wolverine suits in the comics, he hardly ever has sleeves.
@@DougUnfunny me too. The good news is Disney will have Hugh Jackman play Wolverine until his 90 so maybe we will get this exact look eventually
They should have had him w the shoulder pads in the movie! You should have shown this look w his masked head
@@BrianGrossman-lu7cf I forgot to swap heads in the video, but I did post a short that shows both unmasked and masked heads