Hey there guys and gals lol I have a 04 cobra I got exhaust and heat exchanger on the car is a 90mm metco double bearing pulley installed wondering needs some advice what would be best setup for a stock Eaton super charger pulley would y'all suggest and throttle body any help would be greatly appreciated thanks awesome video by the way
Mustang Lifestyle so If I run that set up I won't need to change maf or injectors or fuel pump just wondering bro I new to modular I had the old foxbody. Lol bit I do got offroad x with magnaflow catback exhaust heat exchanger on the way just put a stage 3 spec in love it
Mustang Lifestyle awesome guess I better order now than lol thanks for the info man greatly appreciate it and love all your vids bro love that cobra too
+Dark Times thanks man. And remember to replace your idlers. Hit up Metco for a set. Don’t want to end up like me with a snapped one lol. They have the upper pulley too. Give them a call and tell them Mustang lifestyle sent you
This video was a life saver. I’ve been having the same issue with my terminator. I noticed at first when you turned the key the battery light was not on even after you put the new alternator in. Then when you replaced the connector the battery light was on. And the problem was fixed
Mustang Lifestyle thanks appreciate it! So I should just buy a used engine? I’m assuming it’s cheaper than a rebuild. I was quoted 2.5k for my 2v full rebuilt.
Motor on the Cobra looks so clean! I have a ‘17 GT and love it. But also think your Cobra 🐍 is awesome. Don’t ever sell it there are tons of S550’s your car is unique.
I'd like to buy the brown car.. i miss my '03 gt and would really like another project car. Hmu if you decide to sell. Love the channel! Its my morning routine, while drinkin my coffee. 😊😊
Congratulations, now waiting for clutch install, on another note to the comments about trading cobra to a 2018, I personally think the cobras are a drivers car steering feel, seat placement and good looks of course, feel like a sardine in newer mustangs sits to low dash, doors to high just my opinion, good video
We have 3 mustangs and I just pulled the motor out of my 66 mustang for rebuild my grandmas mustang needs a few things so we just have my moms too same boat good luck with yours
Just had this exact issue with my cobra. .. changed the connector and charge is now 14.5 👌🏾 😌
Hey there guys and gals lol I have a 04 cobra I got exhaust and heat exchanger on the car is a 90mm metco double bearing pulley installed wondering needs some advice what would be best setup for a stock Eaton super charger pulley would y'all suggest and throttle body any help would be greatly appreciated thanks awesome video by the way
+Dark Times I would suggest a 2.76 upper pulley with acufab throttle body and elbow. I ran that setup and made 477rwjp and 506rwt
Mustang Lifestyle so If I run that set up I won't need to change maf or injectors or fuel pump just wondering bro I new to modular I had the old foxbody. Lol bit I do got offroad x with magnaflow catback exhaust heat exchanger on the way just put a stage 3 spec in love it
+Dark Times yes stock maf injectors and pumps will work
Mustang Lifestyle awesome guess I better order now than lol thanks for the info man greatly appreciate it and love all your vids bro love that cobra too
+Dark Times thanks man. And remember to replace your idlers. Hit up Metco for a set. Don’t want to end up like me with a snapped one lol. They have the upper pulley too. Give them a call and tell them Mustang lifestyle sent you
Danny,
Do you know if the crossover tube has to be removed to replace an alternator on an 04 mach 1?
I love it very good
Glad the cobra forum helped you and good ole nick! What a lifesaver!
So its just the bracket that has to be losend or is it Both bolts?
This video was a life saver. I’ve been having the same issue with my terminator. I noticed at first when you turned the key the battery light was not on even after you put the new alternator in. Then when you replaced the connector the battery light was on. And the problem was fixed
So, was the old alternator bad? or was it the wiring in the first place?
+Dave Boyer it was the wiring. The old one tested good at autozone
What is that tool called at 8:52
Yay new video
LoL @ the intro! Love the videos guys!
Justin York needs a new intro
KENNETH _2v it was funny. I’m taking about him “having no idea what the hell he’s doing”.
Motercraft oil filter good man
obty Andrew Merry Christmas
Any suggestion? Sooo recently blew my 2V motor on my 2003 GT. Rebuild the engine or try to swap it for a 4v? Anyone selling one?
crown vic or grand marquis 01+ is the same engine. It is a direct fit
Mustang Lifestyle thanks appreciate it! So I should just buy a used engine? I’m assuming it’s cheaper than a rebuild. I was quoted 2.5k for my 2v full rebuilt.
Good Job, Problem Solved
Didn't you get a vmp supercharger?
keith barrios it is
Motor on the Cobra looks so clean! I have a ‘17 GT and love it. But also think your Cobra 🐍 is awesome. Don’t ever sell it there are tons of S550’s your car is unique.
Just changed my alternator, now the battery light is off but still no charging.....
Can’t wait for the clutch to get put in
Glad u got that issue fixed brother,now fix time to install that clutch and spline to be back in action
I'd like to buy the brown car.. i miss my '03 gt and would really like another project car. Hmu if you decide to sell. Love the channel! Its my morning routine, while drinkin my coffee. 😊😊
+TODD BARK lol glad to hear Todd about the morning routine haha. It is for sale. Send us a message on Facebook or Instagram or email
Had my alternator go out on me in the drag strip , replaced it and it went out on me again that same week, on a new alternator now
what alternators did you go with? OEM, autozone, ebay?
When it went out I had a O'Reilly's warranty now I'm on a OEM
Gm one wire alternator just put one in my foxbody fixed all my problems
Congratulations, now waiting for clutch install, on another note to the comments about trading cobra to a 2018, I personally think the cobras are a drivers car steering feel, seat placement and good looks of course, feel like a sardine in newer mustangs sits to low dash, doors to high just my opinion, good video
Are you still going to sell the brown car
yes after the cars are all fixed
We have 3 mustangs and I just pulled the motor out of my 66 mustang for rebuild my grandmas mustang needs a few things so we just have my moms too same boat good luck with yours
Perfect excuse to do the big 3! Its hella easy lol
If it’s not one thing it’s another with these cars. I just sold mine to get a 17 s550. It’s not as fast (yet) but I’m damn impressed
Legend says he said “alright” 5000 times this video 😂
good ole reliable 2V
Where’s Scott?
iceland
All that work for a stupid plug! Grrrrrr! Next...CLUTCH!! Get that Cobra back in action!
More Ashley!!! Less Andrew
Still not as bad as the cobra motor 😅
It’s those cheap reman alternators. always pay the extra for a brand new one.
this Nissan-that runs reliably taking me to parts store to buy parts for my fast car so it can run-is so slow....lol
Put some money in a good battery God damnit.
Nick deserves a steak dinner
Constant running on a dead battery didn't help the alternator
Pro charger install
Lol
Andrew sell the cobra get a 2018 with a warranty and let the good times roll
nope
Oh well, there goes the warranty claim on the alternator.