I just did my DDX396 and followed your steps and it updated perfectly. Yes, it does delete all previous settings for radio stations and sound preferences, but it takes me about 15 min to go back and reset them all. Make sure your USB drive is formatted to FAT32 or it will not work as this video states exactly. I had that issue. Thanks for the guidance!
do you have any experience with the DNX4150BT? Mine is 1,5 but there is a 1,7 out but my system cant see the USB and i´ve tried formatting it to FAT32 and all other formats. And still it doesnt see it.
good day Do you also know about Kenwood car radio? I bought a kenwood dnn9250dab from eBay and didn't know the previous owner was registered with route-collector and can't get in because needs a password and didn't have that. Can you please help me? Thanks
Dear, My Kenwood DNN9330BT car player show this: “rebuilding system”, and I can not perform any action on this player! Please show me what can I do with this car player! Thanks for your helping!
Dean I'm trying this I don't have save pop up it says open or open folder? DDX 396 I have. I get it to download I click on it all it says open there no save that pops up
Trying to update the DMX7705S.....I got to gears>special >software information....from here do I just install the thumb drive....because there is no "update" tab
Definitely takes a long time for even just the status bar to start moving. At least on mine lol. I had to wait like 5+ minutes before it finally started showing some progress
My excelon stays on the Please insert update usb. I insert usb and just stays on that screen. And also my samsung note 20 will not connect when I plug it in the USB. It says . cannot play this device Check device. Does the same thing with my samsung s10+ Can my usb plug be bad
I went through the process of updating it and when it's finished, I go to check the system information to see if it actually updated but it's still on the same firmware and it says update beside it.
Need software and Dvd update for DDX394,just got radio. Looks like it's missing v0..107 and Dvd states update for those two,got firmware update from kenwood for firmware but can't find the system software and Dvd update?
I'm not sure if you can help me or not. I recently bought this stereo from Amazon. I had it installed; however, the usb cord was not attached. Should this have been in the box or is this an accessory and I should have purchased it seperately? Also, this stereo constantly changes to demo mode once you turn off engine. I cannot get any preset, time, or demo to switch. What would you suggest I do? Please please please help!
The USB cord was attached, it wasn't pulled out of the dash. I had to pull the cover off and *poof* there it was. I am still having the same problem. I updated the unit, per your instructions, and it's the same. When the car is shut off, it reverts back to demo mode. Nothing is saved. No FM stations, time, demo screen still comes on, and I cannot get the Sirius radio work. Does it still sound like the wires are backwards?
hi how are you going I have a radio kenwood ddx416bt update it but at the end my radio asked me to reset and what I did was turn off my vehicle. When you turn it on again, it does not turn on, you could help me. Thank you
Okay I'm already completely lost. Yours when you downloaded it gave you an option to save it. Mien did not, and told me it could not open the file. Mine downloads as a KRM file, while yours is a ROM file. Wtf? What program do I need to have to open this the way you did? I'm not finding any information exept that there "are many types of KRM" and you have to figure out which program you need in order to open it. Wtf.
Kinda same issue I’m having along with trying to proceed with the KRM file on the drive and then my unit won’t even recognize there is a flash drive in it
hello i need help, i wanted to update my autostereo but it marked an error during the update and now it only shows the white screen, and it does nothing
Shay Boyd it never goes to the update screen?did you use a Windows computer and formate the drive to fat32. Are you plugged into the USB that says iPod
Thank you would love too, I didn't know there was an update. Alpine as a company is kind of weird when it comes to updates, they don't like to do them all that much.
+Five Star Car Stereo Thanks for your reply....I am not sure if there is an update available but if there is would you be able to show me where to download and how to install it.Thanks
My stereo is kenwood ddx9703s and my software version is 2.5 and I could see a latest update with 2.6 but in the instructions it says the upgrade is applicable for 2.26 and earlier. In this case how do I update the current version. I have issue with my CarPlay it's not showings maps. Please help me to fix my issues
I agree. I don’t need to update, on mine. Everything seems to be working fine since 2017 but my Edge Tuner, Monitoring screen and everything else I have in the cab that’s digital can be updated through WiFi or Hotspot. It is truly ridiculous.
Dear, My Kenwood DNN9330BT car player show this: “rebuilding system”, and I can not perform any action on this player! Please show me what can I do with this car player! Thanks for your helping!
This works! I have followed instructions from several people and nothing ever worked until this. Great job thank you.
Thank you, glad we could help.
I just did my DDX396 and followed your steps and it updated perfectly. Yes, it does delete all previous settings for radio stations and sound preferences, but it takes me about 15 min to go back and reset them all. Make sure your USB drive is formatted to FAT32 or it will not work as this video states exactly. I had that issue. Thanks for the guidance!
I can't get my computer does what Dean does I don't see save just says open or open folder
I have a ddx9902s I just got, and update options are not highlighted. Am I good or have to do something?
If you figure it out? Did it. Ake a difference?
@@marcusd25I sold it . It took 2 mins to reboot every time I turned it on.
do you have any experience with the DNX4150BT? Mine is 1,5 but there is a 1,7 out but my system cant see the USB and i´ve tried formatting it to FAT32 and all other formats. And still it doesnt see it.
Can u pls tell me if there is an update for the 2018 ddx396 exelon. It needs updated but I cannot find anything for this model only the 2019 model
Is the Kenwood DDX 419 upgradable for navigation system? Please respond if you know, thanks great video.
good day Do you also know about Kenwood car radio? I bought a kenwood dnn9250dab from eBay and didn't know the previous owner was registered with route-collector and can't get in because needs a password and didn't have that. Can you please help me? Thanks
When in bluetooth ! My phone doesn’t control volume on my kenwood dmx125bt ! Any suggestions
Ok so I have a kenwood dnx 6980 and it doesn’t even have an update button for me to choose from the software selection-any idea what to do here?
If I do the update does it make the system quicker at all when hitting apps? So slow this stereo when opening anything
Dear,
My Kenwood DNN9330BT car player show this: “rebuilding system”, and I can not perform any action on this player!
Please show me what can I do with this car player!
Thanks for your helping!
Dean
I'm trying this I don't have save pop up it says open or open folder? DDX 396 I have. I get it to download I click on it all it says open there no save that pops up
Trying to update the DMX7705S.....I got to gears>special >software information....from here do I just install the thumb drive....because there is no "update" tab
Definitely takes a long time for even just the status bar to start moving. At least on mine lol. I had to wait like 5+ minutes before it finally started showing some progress
Have a DDX376BT. My software updated successfully, but I can't get my application one to update..
Please also suggest a solution to update software of DDX716
My excelon stays on the
Please insert update usb.
I insert usb and just stays on that screen.
And also my samsung note 20 will not connect when I plug it in the USB.
It says .
cannot play this device
Check device.
Does the same thing with my samsung s10+
Can my usb plug be bad
I need a recovery update for my kenwood DDX7050BT what can I do?
I went through the process of updating it and when it's finished, I go to check the system information to see if it actually updated but it's still on the same firmware and it says update beside it.
hi I have a problem.I installed the program but in the end instead of resetarr I turned off.Now it doesn't work anymore what can I do
Work that oppdate if you use flash memory, not tranfer from Android phone
How can I change the FM for international use (Europe) for a Kenwood DDX771?
Need software and Dvd update for DDX394,just got radio. Looks like it's missing v0..107 and Dvd states update for those two,got firmware update from kenwood for firmware but can't find the system software and Dvd update?
same they don't seem to have the update for everything on the site for 394
I have a kenwood ddx6902s and it does not start, it is on the home screen and it does not work, what do I have to do?
Hi mate, do you have DDX416BT v0.0104 file? I have updated it to the latest and the unit is now unusable.
Should the Apps FW be updated before the SYS FW?
Any way to do this when touchscreen is not working properly.
No
My head unit DMX7017DABS says no files when I plug it in
hello, can u guide me to update ddx4031bt
I'm not sure if you can help me or not. I recently bought this stereo from Amazon. I had it installed; however, the usb cord was not attached. Should this have been in the box or is this an accessory and I should have purchased it seperately? Also, this stereo constantly changes to demo mode once you turn off engine. I cannot get any preset, time, or demo to switch. What would you suggest I do? Please please please help!
Shan T What model do you have? Check your red and yellow wires the sound like they are backwards.
I bought the Kenwood eXcelon DDX593
The USB cord was attached, it wasn't pulled out of the dash. I had to pull the cover off and *poof* there it was.
I am still having the same problem. I updated the unit, per your instructions, and it's the same. When the car is shut off, it reverts back to demo mode. Nothing is saved. No FM stations, time, demo screen still comes on, and I cannot get the Sirius radio work. Does it still sound like the wires are backwards?
my problum is windows 10 will not allow my to format the drive in fat 32 onlt NTFS And EXFat
Does the thumb drive have to be empty , cause I have flac music on it?
Yes it has to be empty
@@FiveStarCarStereoInc explain what's a good thumb drive and the software in a brand new drive, do I erase that or?
It would be good if all the new systems used a phone app or just use the wifi that’s built in to Connect to wifi at home.
How to update Bluetooth and android maps in jvc kw-v10
Mine shows like 10 Garmen files and like 10 caution cones ?
hi how are you going I have a radio kenwood ddx416bt update it but at the end my radio asked me to reset and what I did was turn off my vehicle. When you turn it on again, it does not turn on, you could help me.
Thank you
I have the same problem did you find a fix
Hi
i have Kenwood Excelon 9902s with the application version V1.7.0 and system v2.000
this is the las version for this unit?
Yes it looks like the current version
How did you get a v1.7.0 for that unit? All I see on the website is 1.6.0
Necesito una actualización de recuperación para mi kenwood 7050BT que puedo hacer ??
will doing this reset the entire head unit (stored stations ,eq settings, ect...)?
Yes take photos of setting before updating
+Five Star Car Stereo good to know.
Do stereo shops do this? This is ridiculous..
Okay I'm already completely lost. Yours when you downloaded it gave you an option to save it. Mien did not, and told me it could not open the file. Mine downloads as a KRM file, while yours is a ROM file. Wtf? What program do I need to have to open this the way you did? I'm not finding any information exept that there "are many types of KRM" and you have to figure out which program you need in order to open it. Wtf.
Kinda same issue I’m having along with trying to proceed with the KRM file on the drive and then my unit won’t even recognize there is a flash drive in it
Hi Dean ! How are you?
I'm Daniel and I've one ddx 3070, need up date but don't finded Help us !!
I tried to update my unit, but an error occurred and now the screen is black. I have tried to reset and nothing happens. have I ruined my unit?
Grace Wright you are going to have to send it back unfortunately
I have this same problem.
Same issue, is there solution?
hello i need help, i wanted to update my autostereo but it marked an error during the update and now it only shows the white screen, and it does nothing
Same thing happened to me did you ever fix the issue?
Any luck? Same thing happened to me
My head unit continues to say now checking.... have I done something wrong or what do I need to do
Shay Boyd it never goes to the update screen?did you use a Windows computer and formate the drive to fat32. Are you plugged into the USB that says iPod
Five Star Car Stereo I did format the drive to fat32 I'm using a dell computer but no it never went to the download screen
Or the update screen
Shay Boyd is it plugged into the right USB
Five Star Car Stereo I believe so because he I plug it in it tells me to plug in or insert disk and when I plug it in it tells me now checking
This video is outdated, may want to make a new one
How do you know your current firmware date on the head unit?
G P go to the menu and then go to the system information
Update failed. What should I do?
could you fix it?
Felicidades Muy buenos vídeos ,pero no podrían hacerlo con subtítulos en español o bien en español ?seria mucho más que genial ,saludos
Para que sirve esa actualización??
Mine says update failed
Hi would you be able to do a video on updating an Alpine ILX 007 radio? I am a big fan of your channel and like your videos. Thanks you!
Thank you would love too, I didn't know there was an update. Alpine as a company is kind of weird when it comes to updates, they don't like to do them all that much.
+Five Star Car Stereo
Thanks for your reply....I am not sure if there is an update available but if there is would you be able to show me where to download and how to install it.Thanks
+Julio Andriuoli you bet, I will be taking with the rep next week and see if he has any information.
+Five Star Car Stereo
Thank you so much.
My stereo is kenwood ddx9703s and my software version is 2.5 and I could see a latest update with 2.6 but in the instructions it says the upgrade is applicable for 2.26 and earlier. In this case how do I update the current version. I have issue with my CarPlay it's not showings maps. Please help me to fix my issues
My kenwood, system rebuilding Help please
I'm seeing far too many negative results here, I think I'll leave mine alone 😅
I get a Cannot play this device
Para que sirve esa actualización
Kenwood
Cant believe that in this day and age you can't just plug your smart phone in the usb and update from the website. ....Pathetic Nice video though
I agree. I don’t need to update, on mine. Everything seems to be working fine since 2017 but my Edge Tuner, Monitoring screen and everything else I have in the cab that’s digital can be updated through WiFi or Hotspot. It is truly ridiculous.
NEVER do a firmware update , unless you feel it has something you absolutely need in it.
Dear,
My Kenwood DNN9330BT car player show this: “rebuilding system”, and I can not perform any action on this player!
Please show me what can I do with this car player!
Thanks for your helping!
i have the kenwood dnx994s i put the new file on usb but wont do nothing
Sid Kachef I have the DMx906s and it does the same. Smh.