Minn Kota Ultrex Installation Overview | Trolling Motor Install

This video will walk you through the basics of installing a Minn Kota Ultrex trolling motor. *This video is meant to be a supplement to the official trolling motor installation instructions and precautions. Please refer to those instructions for complete steps. (See Links Below)
Ultrex Installation Manual: bit.ly/UltrexManuals
0:00 - Introduction, Tools Needed & Manual
1:30 - Mounting the Motor Assembly to the Motor Base (Mono Arm)
5:15 - Mounting the Trolling Motor to the Bow
10:34 - Installing Lift Assist Cylinder
12:16 - Installing the Prop
13:29 - Mounting the Stabilizer Bar
16:30 - Cable Management
19:16 - Wiring the Trolling Motor
23:16 - Installing the Heading Sensor
28:15 - Pairing the Heading Sensor
29:08 - Connecting i-Pilot Link and Sonar
33:16 - Closing
Subscribe for more Minn Kota How-to videos! bit.ly/35DiLAX
www.minnkotamotors.com

[@leeseifert2711]

Excellent instructional video. Your presentation is spot on. You are easy to follow and provided great explanations.

[@mcconn746]

There are instructions in our book that talks about orienting the motor for starboard and port mount. We mounted our trolling motor on the bow of a pontoon boat. Do we have to make any adjustments? Thanks.

[@seantobin8547]

Great video. Whats it cost roughly to just pay to have it installed by a profesional like yourself?

[@gregnettles3677]

Can the mono arm be powered coated?

[@williambigsby4031]

What type of drill bit are u using

[@angeltapia3555]

What was the shaft length? 45 or 52 inch?