Ive just brought one of these to put in my Ender 5 plus, Hoping i can use extruder 0 for the extra Z motor and Extruder 1 for the extruder itself. This is to replace the MiniE3V3 BTT sold me flashed for Ender 3 and its never worked right on either of my E5+s. Fingers crossed.
I edited all the entries as per the video I have a blue pcb light on the BLTouch that shows it working and I also the self-test of the bltouch passed with retracting and deploying but when I home using the zmax pin the pin never deploys and if your not careful it can crash into the bed using your latest firmware 2.0.1. Your help will be appreciated using a Corexy machine
@@makerbaseteam4217 I have two z motors and two end stop on on Z- and the other on Z+. I plugged in the bltouch probe in Z+. I am able to use zmax for auto bed leveling I send a g29 gcode to the bltouch and the gantry moves to the first spot but the probe does not deploy. I am not using it for z safe homing just want to use it for auto leveling only. I verified the bltouch works on my other machine just omake sure it not a bltouch problem. I am using the sainsmart coreception. Is there anywhere where i can send you the config file to look at and modify what wrong? so I can write the instructions on github if anyone else has the same problem I have?
@@dominkidalvin Hi,the latest(v2.0.1) firmware has z-safe-homing function, you can enable it on the config.txt file, and connects the 3dtouch to the z- endstop
Makerbase Team: Could you please advise me with configuration of bltouch in Marlin(Mks-Robin-Nano-Marlin2.0-Firmware)? Now I have installed on MKS-Robin-Nano-1.2v with mks-firmware acording video above, where bltouch is plug in z-max connector together with endstop in z-min connector(bltouch isn't configure as endstop). Which parameters should be enable in Configuration.h file?
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
![YoungBoy Never Broke Again - Catch Me [Official Video]](http://i.ytimg.com/vi/KxwEXXFQMTY/mqdefault.jpg)
Ive just brought one of these to put in my Ender 5 plus, Hoping i can use extruder 0 for the extra Z motor and Extruder 1 for the extruder itself. This is to replace the MiniE3V3 BTT sold me flashed for Ender 3 and its never worked right on either of my E5+s. Fingers crossed.
MKS Robin Nano V2 for CNC application (Router/Plasma Lowrider3), anything for auto-squaring? Y-Y1, Z-Z1 (Y1 E0, Z1 E1 ?)
What about a configuration video about using inductive sensor on robin nano? thanks in advance !
Thank you, we will consider it
I edited all the entries as per the video I have a blue pcb light on the BLTouch that shows it working and I also the self-test of the bltouch passed with retracting and deploying but when I home using the zmax pin the pin never deploys and if your not careful it can crash into the bed using your latest firmware 2.0.1. Your help will be appreciated using a Corexy machine
You use bltouch as z endstop to home? If you do, you just can connect bltouch to the zmin, zmax is not available
@@makerbaseteam4217 I have two z motors and two end stop on on Z- and the other on Z+. I plugged in the bltouch probe in Z+. I am able to use zmax for auto bed leveling I send a g29 gcode to the bltouch and the gantry moves to the first spot but the probe does not deploy. I am not using it for z safe homing just want to use it for auto leveling only. I verified the bltouch works on my other machine just omake sure it not a bltouch problem. I am using the sainsmart coreception. Is there anywhere where i can send you the config file to look at and modify what wrong? so I can write the instructions on github if anyone else has the same problem I have?
@@dominkidalvin Hi,the latest(v2.0.1) firmware has z-safe-homing function, you can enable it on the config.txt file, and connects the 3dtouch to the z- endstop
Makerbase Team: Could you please advise me with configuration of bltouch in Marlin(Mks-Robin-Nano-Marlin2.0-Firmware)? Now I have installed on MKS-Robin-Nano-1.2v with mks-firmware acording video above, where bltouch is plug in z-max connector together with endstop in z-min connector(bltouch isn't configure as endstop). Which parameters should be enable in Configuration.h file?
For configuration, please refer to the second half of this video ruclips.net/video/r2A0b7XQEaI/видео.html
What about using sensor touche mi if hotend.fr?
I need a info about enclosure the board into original case ender 3 pro. Do you have???
The size of this motherboard cannot be directly installed on this machine
@@makerbaseteam4217 I have to try your 3d case but download don't start. Have a new link for 3d case Robin anano v.1.x?