Your complete GitHub-folder doesn't contain the file "Robin_nano35_cfg.txt" !!! WHERE IS IT!?!?! You also leave a lot of small steps out of your video which doesn't help. Because the small steps are the important ones!
Hello, I have a mks robin nano 1.2 card and a tft 35 v1.0 screen and when I compile the screen is on the good side, however the icons are not on the good side, marlin 2.0, thank you for answering me
I bought a flsun q5 and the board had turned out to be complete junk ad 3 yrs ago now they never responded back to help or troubleshoot or replace. The board is taken out now and no longer works. The section for the ribbon insert no longer holds ribbon for screen.
Hello I have Isue aboot my screen I do every thing about programming and I have a white screen now what I have to do? I tried many things dut I cant slove the problem
Hi, It is because your firmware is not completely updated. You can try to change a new sd card to have a try or format the sd card to fat32 format. Please refer to this video: ruclips.net/video/B9_JuKjhXXQ/видео.html
After loading i get to "TFT Updating 100%" and then it just hangs. If I reboot I get the "Booting" screen and it just hangs. Never progresses any further.
Hi I have a MKS Eagle v1.0 with Display TS35 v2.0 I've been trying for months to make my printer work, the icons are like "no data" it doesn't recognize either SD Card and USB. I need urgent help, there is no material for it, even with the original Firmware it is like this.
Does this video show the motor direction configuration from the menu not working immediately. The initial test showed X and Y moving the wrong way, he then swapped the direction in the machine motor settings. Then when he went back and tested, X still moved the wrong way for a couple of menu presses.
Hi i´m trying to use the auto PID calibration with pronterface sending -GCODE M303 E0 S210 C8 and i can´t see the response of the auto PID, exist another way to perform a auto PID calibration? using Robin Nano V1.2 and TFT35, stock firmware.
You can download the firmware here:github.com/makerbase-mks/MKS-Robin-Nano/tree/master/Nano%20firmware%20v2.x.x, then adjust the firmware according to the parameters of your machine or the operating conditions.
I have bought the Robin Nano v3 with the TS35 screen, autoleveling acts weird after complete probing the bed, how can i see the code that's behind the autoleveling button?
@@makerbaseteam4217 Everything is ok now. Making the #define X_CURRENT_HOME X_CURRENT to #define X_CURRENT_HOME X_CURRENT / 2 for each axis solved the problem Autoleveling button after finishing the bed probing run's a home command again and afterwards a babysteping the z offset, the second homing was not set correctly cause the sensorlles homing was not perfomed corectly so it was way of the frame, now everything is ok. Just inform the CoreXY users to do the #define X_CURRENT_HOME X_CURRENT / 2 on Configuration_adv.h. Thank you for your time.
@@makerbaseteam4217 Висходном коде стоит ограничение на нагрев 200 градусов, а максимальная температура печати 275, и при кали бровке PID НА 240 градусов в Repeter Host при командеM303 S240 выдает ошибку и нагрев хотенда идет на спад
@@ВиталийЛуговой-ч3ч 1. the output of the motherboard is not correspond with rated voltage of heater, it will lead to the temperature raised fast, and it cannot be stabilized to 240 degree (target temperature), so it occurs the error? 2. You connect the fans to cool down that causes temperature fluctuations?
@@makerbaseteam4217 а как же мне калибровать температуру для печати если она прыгает +-8 градусов? На прошивке чистого Marlin этих скачков температуры нет, и все калибруется
Why cant you just show a beginner how to connect your product? Why cant you just show a beginner how to use your product? Why cant you just supply a beginner with a file they can load so your product works? Is that all you care about is selling product, wouldn’t it be great if people that bought your product, loved it and told others how great it is, oh yea, how easy it is to install and use. Or just sell and read everyone has the same question. HOW
good morning friend, would these video parameters be for an ender 3 pro? I am waiting to receive your motherboard and tft 35 robins nano series. thank you very much a greeting
Makerbase Team I have the mks robin mini v2.0 with tft24 v1.0 I cant get the screen to display the mks gui, it only displays marlin gui and settings. The mkstool doesn’t change it, and the tft configs through micro usb don’t change it either, it appears to be uploading on the screen but after completion it’s still marlin. Please help.
@@makerbaseteam4217 как? оно не хочет его устанавливать , фай просто остается на флешке он не хочет брать его он не переводит его в c формата txt в cur. что делать? ето случилось после последней прошивки с официального сайта saphire pro, помогите прошу! я уже неделю не могу найти решение, может можно как то сбросить на заводские настройки? а на прошивке от марлин не видит файли для печати...
Your complete GitHub-folder doesn't contain the file "Robin_nano35_cfg.txt" !!!
WHERE IS IT!?!?!
You also leave a lot of small steps out of your video which doesn't help. Because the small steps are the important ones!
LOVE Robin Nano with the last marlin 2.0 update,
Hello, I have a mks robin nano 1.2 card and a tft 35 v1.0 screen and when I compile the screen is on the good side, however the icons are not on the good side, marlin 2.0, thank you for answering me
I bought a flsun q5 and the board had turned out to be complete junk ad 3 yrs ago now they never responded back to help or troubleshoot or replace. The board is taken out now and no longer works. The section for the ribbon insert no longer holds ribbon for screen.
Hello I have Isue aboot my screen I do every thing about programming and I have a white screen now what I have to do? I tried many things dut I cant slove the problem
Hi, It is because your firmware is not completely updated. You can try to change a new sd card to have a try or format the sd card to fat32 format. Please refer to this video: ruclips.net/video/B9_JuKjhXXQ/видео.html
I can,t find basic settings in cfg.txt. My one start advanced settings.
How can i get that?
After loading i get to "TFT Updating 100%" and then it just hangs. If I reboot I get the "Booting" screen and it just hangs. Never progresses any further.
Hi, Question, i want to activate a button to set a 5:MESH_BED_LEVELING with 9 points, where can i find a guide to set this?
Hi I have a MKS Eagle v1.0 with Display TS35 v2.0 I've been trying for months to make my printer work, the icons are like "no data" it doesn't recognize either SD Card and USB.
I need urgent help, there is no material for it, even with the original Firmware it is like this.
Did you update the firmware? You can contact us on facebook and post a picture of your question
Does this video show the motor direction configuration from the menu not working immediately. The initial test showed X and Y moving the wrong way, he then swapped the direction in the machine motor settings. Then when he went back and tested, X still moved the wrong way for a couple of menu presses.
You have to wait a while before the firmware executes the new motor direction
it seems there are more setting that shows on the screen.
example: direction of the motor.
how to turn it on?
Board: MKS Robin Nano v2
Robin Nano V2 is not supported. Robin NanoV2's firmware is marlin firmware, and these cannot be modified on the screen.
Hi i´m trying to use the auto PID calibration with pronterface sending -GCODE M303 E0 S210 C8 and i can´t see the response of the auto PID, exist another way to perform a auto PID calibration? using Robin Nano V1.2 and TFT35, stock firmware.
Nothing else, just this adjustment command
Hi. Is it possible to install screen vertically?
Sorry it is not possible now.
I need help on converting the board to work with my tronxy xy-2 I'm really new to this
What's the problem?
How can I modify the CR10 firmware? Is there any text in the video that you want to change?
You can download the firmware here:github.com/makerbase-mks/MKS-Robin-Nano/tree/master/Nano%20firmware%20v2.x.x, then adjust the firmware according to the parameters of your machine or the operating conditions.
@@makerbaseteam4217 Thank you for your reply.
@@makerbaseteam4217 How do I do dual z?
@@최모씨-r6d Jsut need to adjust the config, you can post the problems on our makerbase facebook group
I have bought the Robin Nano v3 with the TS35 screen, autoleveling acts weird after complete probing the bed, how can i see the code that's behind the autoleveling button?
What will happen after leveling? After leveling, there is usually no action
@@makerbaseteam4217 After completing the last probe point i think it tries to home again but it goes over the frame and bumbs to the sides.
@@Δημήτρης-η4ρ Marlin firmware will not go home after leveling. You added the home command after leveling?
@@makerbaseteam4217 If i use G29 from Prontface is will probe ok, Only with "Autolevel" button from TS35 I get this problem.
@@makerbaseteam4217 Everything is ok now.
Making the
#define X_CURRENT_HOME X_CURRENT
to
#define X_CURRENT_HOME X_CURRENT / 2 for each axis solved the problem
Autoleveling button after finishing the bed probing run's a home command again and afterwards a babysteping the z offset, the second homing was not set correctly cause the sensorlles homing was not perfomed corectly so it was way of the frame, now everything is ok.
Just inform the CoreXY users to do the #define X_CURRENT_HOME X_CURRENT / 2
on Configuration_adv.h.
Thank you for your time.
how do I get this and how do I turn it into a bin file for flashing my board ? im totally a noob need help
Hi, please contact us on ailexpress store or facebook or mail, we need to get more details from you.
quick simple question - how is Nano 2.0 better then say skr v1.4? And I'm serious, I need new board and cannot decide....
При калибровке P.ID, на вашей последней прошивке плата выдает ошибку!!! Опять накосячили с прошивкой!!!
Hi, what error occurs please? Please contact us on aliexpress, facebook or mail. We need to get more details, thanks
@@makerbaseteam4217 Висходном коде стоит ограничение на нагрев 200 градусов, а максимальная температура печати 275, и при кали бровке PID НА 240 градусов в Repeter Host при командеM303 S240 выдает ошибку и нагрев хотенда идет на спад
@@ВиталийЛуговой-ч3ч 1. the output of the motherboard is not correspond with rated voltage of heater, it will lead to the temperature raised fast, and it cannot be stabilized to 240 degree (target temperature), so it occurs the error? 2. You connect the fans to cool down that causes temperature fluctuations?
@@makerbaseteam4217 а как же мне калибровать температуру для печати если она прыгает +-8 градусов? На прошивке чистого Marlin этих скачков температуры нет, и все калибруется
Why cant you just show a beginner how to connect your product? Why cant you just show a beginner how to use your product? Why cant you just supply a beginner with a file they can load so your product works? Is that all you care about is selling product, wouldn’t it be great if people that bought your product, loved it and told others how great it is, oh yea, how easy it is to install and use. Or just sell and read everyone has the same question. HOW
good morning friend, would these video parameters be for an ender 3 pro?
I am waiting to receive your motherboard and tft 35 robins nano series.
thank you very much a greeting
Dear Victor, almost all the parameters are same, you can refer to the video, and pratice it as your actual need.
Makerbase Team I have the mks robin mini v2.0 with tft24 v1.0 I cant get the screen to display the mks gui, it only displays marlin gui and settings. The mkstool doesn’t change it, and the tft configs through micro usb don’t change it either, it appears to be uploading on the screen but after completion it’s still marlin. Please help.
@@andrewadams8717 Please join our makerbase facebook team and post your problems there: facebook.com/Makerbase.mks/
не устанавливает конфиг файл на mks robin nano 1.2 что делать?
Hello, just update the configuration file
@@makerbaseteam4217 как? оно не хочет его устанавливать , фай просто остается на флешке он не хочет брать его он не переводит его в c формата txt в cur. что делать? ето случилось после последней прошивки с официального сайта saphire pro, помогите прошу! я уже неделю не могу найти решение, может можно как то сбросить на заводские настройки? а на прошивке от марлин не видит файли для печати...
@@viktorcarnage2226 Is your profile name correct? The wrong configuration file cannot be recognized and updated, and you can format your TF card
@@makerbaseteam4217 имена правильно указаны, я с официального сайта ничего не изменял... Карту форматировал
@@makerbaseteam4217 что можно сделать? Что может помочь?