So we can cut the transparent platic pipes stoppers on top? It was the only issue for my assembly. I'm using it from October 2020, and the only problem I found is when using the butterfly on the lower position, due to the fixing screw knob position I can't use the weights in front of it because there is no space to extract an put the weight pin in 3 or 4 positions. Other request should be to have a rubber circular plate underneath the wood black base, due to compensate the floor linearity and stay adherent to it and keep the wood to be water protected during floor cleaning.....maybe also have a 2:1 cable in the box because for me is not so easy to find one. I found the slimbeam very nice, well made and usefull machine, very happy of my purchase 😀
The studs for mine were far from the place where I wanted to install. I had to build a 4cm thick plank, about 50 cm wide, to bridge those studs, and screw Slimbeam into the plank. I then painted plank same color.
No illustration of fixing to the wall?
I just followed your assembly and fixed a slipped cable on my machine! Thanks!
So we can cut the transparent platic pipes stoppers on top?
It was the only issue for my assembly.
I'm using it from October 2020, and the only problem I found is when using the butterfly on the lower position, due to the fixing screw knob position I can't use the weights in front of it because there is no space to extract an put the weight pin in 3 or 4 positions.
Other request should be to have a rubber circular plate underneath the wood black base, due to compensate the floor linearity and stay adherent to it and keep the wood to be water protected during floor cleaning.....maybe also have a 2:1 cable in the box because for me is not so easy to find one.
I found the slimbeam very nice, well made and usefull machine, very happy of my purchase 😀
Yes. Those are just to reduce sound if you should hit the top.
Which type of wood option was used for this video?
Does the wall fixture need a stud for stability? Some internet pages suggest this?
Depends a lot on the wall itself i would think. On drywall i would at least have one of it attached to a stud.
The studs for mine were far from the place where I wanted to install. I had to build a 4cm thick plank, about 50 cm wide, to bridge those studs, and screw Slimbeam into the plank. I then painted plank same color.
does having all those pulley change the weight? what the pulley ratio?
Hi @arturo the cable ratios can be 3:1, 2:1 and 1:1. And your unit can become any of these ratios requiring an extra 2 cables.
@@bekeenfitnesswhere is the instruction to make it 3:1 2:1 1:1 ???
Que shooooow. Como faço pra comprar um?