I love how the camera and your head went back when you punched it in the tunnel 😂 that hellcat is a beast!! And I love all the tasteful mods you've done to it its absolutely stunning! 😍 keep up the great work man!!
Godbless you bro! You got a RAM 1500 and a widebody charger. That's a true vehicle pair in my opinion. That's what I'm going for too! The Ram 1500 Laramie 5.7 hemi and the Widebody Scat or the Widebody Hellcat. Nice slam drop on the hellcat springs! The only thing I think you're missing (if you aren't already doing it) is some brutal slamming deathcore metal! I know I'm going to be slamming when I'm driving mine 😎
Look out for those speed humps! Might rip the whole front end off haha. Not sure where you live but stock height in the hellcat is still low. I’ve already scrapped up under the splitter numerous times
Love the white with black rims spec. Questions and concerns - > How's the front tire wear? Any need to install a camber kit.. > How are the stock shocks and struts holding up?
Not sure if they rerouted the wires for active suspension on the wide body, but be sure to make sure it’s clear when you get your drag radials & not rubbing the wires to the struts. Looks good.
I went with Hotchkis springs they come with a smaller bump stop so you’re not riding on the bump stop you get the full travel of the shock and they’re not bouncy because you’re not riding on the bum stop
@@DOOWORKMOTORSPORTS Did you need anything extra like control arms or camber kit to get car aligned once you installed the H&R springs? Trying to put these on a charger 392 scatpack widebody. Thanks
This looks great, I got a 2021 charger widebody hellcat, and it really bothers me how high it sits. It sits high like a goat. My Daytona 392 2018 sits much lower and I haven’t done anything to it. Im just wondering why is widebody hellcat so high out out of factory ? Any reason ? I don’t want to do air suspension, I’m glad I found your video. I have seen a few “lowering” their widebody chargers but the back was still too high. Yours is perfect, thank you for sharing the part numbers and brand. I see you have done it a year ago, so from experience can you tell us if there is any issue with performance or tires rubbing or anything ?
hello, I have a question, it doesn't scratch the tire, it steals the fender and another thing, you don't have problems with alignment, I have an acata pack and I want to download it.
Looks Dopee brother 👍👍👍 enjoy ur KaT, hows the spacers holding up, i have the same exact car, with same set up i just did 315 all around i wanna do the spacers in rear, is it safe with oem bolts?
I'm almost convinced but you never said anything about whether or not you need a camber kit / control arms or how the alignment turned out. I figure all you really need is to have the toe in the positive and you'd be okay. Car looks great by the way.
Can you use these springs in a regular narrow body, that’s what I’m wondering because I’m getting them for my scat very soon, just need to know the right ones to get
Sweet hellcat!!! I just got a 2019 HC white I’m ordering a redeye ASAP now Im a Chevy guy but these chargers are perfect family cars and DD I also have a c8 on the way
Man, that looks good bro! What’s the seat you have in your Road Glide? That bitch is mean bro! I gotta have that seat. Is it nice for longer rides too?
Thanks! And it's a lucky daves step up seat.. If you look back to some older videos of mine, I actually did a review on the seat.. I haven't ridden on the seat for more than a couple hour ride..
Hey wassup bro I have a scat pack charger widebody and I also dropped on h&r springs and my rears are rubbing on the outer tire inner part of the fender towards rear bumper. Have you experienced this?
I havnt been able to find the answer anywhere... im planning on lowering my 16 hellcat challenger, but I have a 20x11 wheel in the back with a 20mm offset, and its wrapped in a 308/35 tire, anyone know if this set up will clear a lowering kit?
Don't get me wrong idk what the obsession with lowering big cars i see it more for smaller cars just strictly my opinion i think it makes the front wheels look smaller and the gap in the front and back of the front wheels look larger if you understand what I'm trying to say great video beautiful car 🚗
Best mod yet. I learned a lot about something that I knew nothing about...other than loving the look of a slammed car. Great video bro!!
This is not a car.....nor a vehicle ....this is a MACHINE 😎
I love how the camera and your head went back when you punched it in the tunnel 😂 that hellcat is a beast!! And I love all the tasteful mods you've done to it its absolutely stunning! 😍 keep up the great work man!!
excited for the charger redeye widebody!!
Soooo sick!! I cannot wait to Install my h&rs on my widebody! Mine is knuckle white too so this video was perfect to see how mine will look! Thank you
Did H&R’s on my 16 Hellcat. Sold that and have a 21’ Widebody Redeye and can’t wait to get the new H&R’s put on that.
Godbless you bro! You got a RAM 1500 and a widebody charger. That's a true vehicle pair in my opinion. That's what I'm going for too! The Ram 1500 Laramie 5.7 hemi and the Widebody Scat or the Widebody Hellcat. Nice slam drop on the hellcat springs! The only thing I think you're missing (if you aren't already doing it) is some brutal slamming deathcore metal! I know I'm going to be slamming when I'm driving mine 😎
does the spacers do anything negative to the car? Love the look of stance I'm about to put some 315's on my Hellcats
No.
Look out for those speed humps! Might rip the whole front end off haha. Not sure where you live but stock height in the hellcat is still low. I’ve already scrapped up under the splitter numerous times
love it bro!! thank you for sharing
Love the white with black rims spec. Questions and concerns -
> How's the front tire wear? Any need to install a camber kit..
> How are the stock shocks and struts holding up?
You being ghosted should answer your questions. Shopping for new tires + a camber kit like all the other H&R dudes.
Not sure if they rerouted the wires for active suspension on the wide body, but be sure to make sure it’s clear when you get your drag radials & not rubbing the wires to the struts. Looks good.
Thanks for the heads up!
Makes me want a Hellcat!!! Looks awesome 👌
h&r lowering springs will make any charger or Challenger look more aggressive even if u have 6 cylinder
Looks wicked good! Those new shoes are gonna send it.
That is gorgeous! I want one lol...
Stock height is good but now it's perfect !
it looks very well😉😉
I went with Hotchkis springs they come with a smaller bump stop so you’re not riding on the bump stop you get the full travel of the shock and they’re not bouncy because you’re not riding on the bum stop
Clean bro.....Gotta love these Michigan roads though lol
Ughhhh They Suck!!
@@DOOWORKMOTORSPORTS Did you need anything extra like control arms or camber kit to get car aligned once you installed the H&R springs? Trying to put these on a charger 392 scatpack widebody. Thanks
@@DOOWORKMOTORSPORTS I feel like they can dial in alignment and put toe in the positive. Thanks for your time
This looks great, I got a 2021 charger widebody hellcat, and it really bothers me how high it sits. It sits high like a goat. My Daytona 392 2018 sits much lower and I haven’t done anything to it. Im just wondering why is widebody hellcat so high out out of factory ? Any reason ? I don’t want to do air suspension, I’m glad I found your video. I have seen a few “lowering” their widebody chargers but the back was still too high. Yours is perfect, thank you for sharing the part numbers and brand. I see you have done it a year ago, so from experience can you tell us if there is any issue with performance or tires rubbing or anything ?
hello, I have a question, it doesn't scratch the tire, it steals the fender and another thing, you don't have problems with alignment, I have an acata pack and I want to download it.
Did you ever go 5mm spacers all around
Looking Kewl man....I just hope Your roads are somewhat better than they are in this area...pot holes aren't the best for low riders...!
Roads around here suck!!
I like that stance. The 315's will look great! 👍
Looks Dopee brother 👍👍👍 enjoy ur KaT, hows the spacers holding up, i have the same exact car, with same set up i just did 315 all around i wanna do the spacers in rear, is it safe with oem bolts?
They are holding up great! No issues! Thanks!
Did you need anything extra like control arms or camber kit to get car aligned once you installed the H&R springs? Thanks
id also like to know about alignment
When you did this did you have the remove the mechanical suspension it comes with ?
Looks good but what happens when you hit a pothole on Clarkston Rd or I-75?
I guess will find out! I try to avoid potholes as much as I can lol
What do you do for work man I need to boss my life up lol
how low are the stuck srt springs ?
I think you could’ve probably just put 315 s on and that would’ve been solid fitment lol
“Pokes in” my fav line lol - ya front needs spacer
i was hesitant to drop mine! how does it handle bumps etc? looks sick by the way!
Did you ever install adjustable camber arms or anything?
Nope.
I got the same springs on mine. how did yours align? looks like you got some positive camber... ? same, ill wait and see with tire wear..
Yeah my car drives straight as an arrow, I don't think I'm going to spend the extra money on an alignment..
I'm almost convinced but you never said anything about whether or not you need a camber kit / control arms or how the alignment turned out. I figure all you really need is to have the toe in the positive and you'd be okay. Car looks great by the way.
I really like the car who much money does it cost with all the aftermarket stuff with it
Interested to see how the 315 tire will be with the lowering springs or if there will be any rubbing
Hello did you need to adjust the camber and get a alignment after installing the springs?
No, I didn't..
@@DOOWORKMOTORSPORTS getting an alignment and adjusting the camber would've fixed that inward poke
How did your alignment turn out cast and Camber toe
Can you use these springs in a regular narrow body, that’s what I’m wondering because I’m getting them for my scat very soon, just need to know the right ones to get
Yes.
@@DOOWORKMOTORSPORTS cool, thank you bro
What tint do u use ? And are the front windows tinted?
SunTek Tint, Yes, 5% all around and 20% on the windshield..
U needed to do an alignment after u did springs
What is your tint percentage? Is it 5% all around with 20% on the front? Looks good!
Yessir! Thank You!
🔥🔥🔥
Looks great, Any chance you know if those spacers fit a Challenger Widebody? I assume so?
Yes they do..
Waiting on my springs atm but how much was the install? Shop here quoted me $340 thats more than the damn springs
Yes, this job is very labor intensive. It's not an easy job..
Mine was $400 with an alignment.
5mm spacers or 3mm? I got the 5mm and there is not much studs length left . Pretty dangerous
How much did you pay for the car?
Will this fit widebody scat pack 2021?
Yes.
I muted this video and wasn't quite sure what it was about, except for the tire removal and spacer installed...oh well...
Any rubbing issues ?
Nope. None.
Does your car have electronic suspension?
Do you feel a stiffer ride and if you do how much percentage wise more
Yeah its a little stiffer than stock..
Cleaan😵
Sweet hellcat!!! I just got a 2019 HC white I’m ordering a redeye ASAP now Im a Chevy guy but these chargers are perfect family cars and DD I also have a c8 on the way
Even tho it says “Dodge Challenger” under the part number, it still fits a charger?
Yes.
I really want to thank you.
Does that rub at all?
No Rubbing at all!
What tire set up you running ?
315/45-20 NT05R
Man, that looks good bro! What’s the seat you have in your Road Glide? That bitch is mean bro! I gotta have that seat. Is it nice for longer rides too?
Thanks! And it's a lucky daves step up seat.. If you look back to some older videos of mine, I actually did a review on the seat.. I haven't ridden on the seat for more than a couple hour ride..
Can i run these on drag pack s81 beadlocks
Yeah, you should be fine!
that white paint 😍
🔥 🔥 🔥
I might have missed if you said it but how many inches did you lower it ?
1.7" is what this kit lowers the car..
Hey wassup bro I have a scat pack charger widebody and I also dropped on h&r springs and my rears are rubbing on the outer tire inner part of the fender towards rear bumper. Have you experienced this?
No, Mine doesn't rub at all..
Did you ever fix this issue or find out what it was?
Any rubbing on in the wheel well area?
Nope, no rubbing!
I havnt been able to find the answer anywhere... im planning on lowering my 16 hellcat challenger, but I have a 20x11 wheel in the back with a 20mm offset, and its wrapped in a 308/35 tire, anyone know if this set up will clear a lowering kit?
Just do mopar springs it’s a slight drop
Hey I got a Widebody . HR said they technically haven’t researched springs for one . Did your figment guy have any issues installing yours ?
Nope all good!
@@DOOWORKMOTORSPORTS yea it worked perfectly... did you do anything to protect the bottom of your splitter?
@@ryanmurray9646 No I didn't
@@DOOWORKMOTORSPORTS I just sprayed mine with Rhino black bed protector,.... worked killer,!! just the underneath to the lip
Do you scrape?
Depending on what inclines I have to go over, Yes..
What is that next to your rear view mirror, a radar detector?
Yes, I use a Valentine One.
Thats great now u get to bounce all over the hiway. WORST mod I ever did no lie! Get KW4 coilovers like I did and do it right.
Slammed down haha 😆
Man thats a sexy ass fuccing car bruh
Can’t see shit honestly, it does look lower but can’t really tell how the rims look
I saw “100% Made In Germany” then I saw “SS”. I was like hhhmmmm wait a minute
Looks bouncier compared to the stock povs I've seen on youtube by the way the camera is going up and down.
Yeah, its a little more bouncy than stock..
Don't get me wrong idk what the obsession with lowering big cars i see it more for smaller cars just strictly my opinion i think it makes the front wheels look smaller and the gap in the front and back of the front wheels look larger if you understand what I'm trying to say great video beautiful car 🚗
Aré those 5mm spacers safe for racing or even for everyday driving? Just wondering
Yes.
Na fam it’s already low enough for me 🤣any lower and I can’t drive it in the street
Update!!! How is the ride quality and handling now that they've set in?
Ride quality is great! It rides a little more stiff than stock, but handles much better!
nice
I’m in Livonia brother let’s link
More better...
Trumper
Shitty roads bud. Where do you live?
I like stock look better
Ruined it
Like your mom