Ram Promaster 1.5in Front Lift Kit BFG K02 All Terrain Tires
HTML-код
- Опубликовано: 17 ноя 2020
- In this video we install the Tema 4x4 front spacers for the Ram Promaster. This video should be good for 2013 - 2020.
Link to Lift Kit: www.amazon.com/Front-strut-sp...
Torque Specs:
Struct Tower Bolts: 41ft-lbs
Lower Sturt Bolt And Nut: 124 ft-lbs
Lower Ball Joint Nut And Washer: 124ft-lbs
Brake Caliper Adapter Bolts: 125ft-lbs
Axle Nut: 350ft-lbs
Vertical Lower Control Arm Bolt: 263ft-lbs
Wheel Speed Sensor: 55in-lbs
Sway Bar: 46ft-lbs
Tie Rod: 66ft-lbs
Lug Nuts: 146ft-lbs
Re-check all bolt torques after 200 miles of driving.
![[2013+] RAM Promaster - Scout Front Bumper Installation](http://i.ytimg.com/vi/ACWQs8ozl_8/mqdefault.jpg)
thats a crazy amount of work
All that for 1.5"? Holy moly....
Also, when using a cheater pipe like you did on the crow bar, you have to keep tight control of the pipe,. A friend had his jaw broken when a cheater snapped up on him while the bar was under heavy tension and sprang when it should've sprung. Good content, I'm a sub now.
You know it!
Hi Tyson !
Being watching your vids, can you plz tell me who makes your pro master tires and what size they are! Appreciate it🙏🏻
Good job fellas. Hey, that’s not how you typically unseat a balljoint. There’s a much easier way. I’m sure there’s a bunch of videos. 👊🏻
Thanks! Yeah there are lots of ways to do things! Definitely isn't a right or wrong way, whatever works best for you.
Great vid! My question is what was your stock tire size originally 15' or 16'? Coz my van (2013 CITROEN-JUMPER3) which is very similar to the PM ( engine apart) is mounted with 15' stock tires.
15s
How did you guys put the ball-joint back in? I can not re-seat it for the life of me.
Did you lift the rear and if not is the van level?
great job,, what did you do in the rear axel?
Nothing in the rear
Hi what size spacer did you use please. Also what was the overall hight lift you was left with please.
1.5in spacer, 1.5in lift
Is it really real to see painted chasis parts?
Drive shaft length ?
Another question,what is the model of the new all-terrain tires mounted?
BFG k02s
What size tires?
Rather than making it hard work with a crowbar to trying to bend the lower control arm down .why didn't you just use a spring compressor to take the pressure off and you wouldn't of needed a bar at all just a thought
Hello man, very good job !!! Meause of Ko2 please ??? 215 or 225 ??? Thankss !!!!
215/70 "15
225/75 "16
Theres another person that says if you go for the 1.5 the ko2s rub on hard turns which you pretty much have to do any time you make a turn. He says go for the 3 inch so nor rubs
Depends on the size of k02s. Absolutely no rubbing for me.
No rub and I have no lift. Running 15" ko2 for years no issues.
The crap traction and diff slip is the true off road killer of this van :(
i did the 2 inch (5cm) lift on my own (nobody wanted to help) Getting the stuff loose and of was not very hard.. Getting it back together with the 2 inch space was a real bitch! So much tension on the swingarms and almost no room to get the steering pinion back in the swing arm.. I did it but definatly would not do it again on my own..
Arlo, what kit did you use?
What size socket for the axle nut
46mm
Tyson yo brother is that really you?
It's Ben Anderston from back in the day I used to live across the street from you.
I drove the old Mazda Miata it was in pretty bad condition.
And the annoying dog that barked all the time.
Sorry man, I don't remember you! In what state?
Big tires hard on transmission.
Underrated comment. I learned this the hard way. But hey, it looks cool.
I'm considering a 2019 PM 118 low roof (6910# Towing Capacity) that has what seems to be a 2" lift and some nice Toyos 245/75/16 (my guess).
My concern is that the lift and tires will destroy the transmission when I try to tow 6000# on what is already considered a terrible transmission. I'd appreciate any advice. My guess is that the best advice is "Stay Away!"
wastefulness, it is categorically impossible to do so