hi thanks for the video please how can we make this forms like this interesting example from Rojkind architects www.plataformaarquitectura.cl/cl/02-22803/museo-del-chocolate-nestle-rojkind-arquitectos?ad_medium=office_landing&ad_name=article I want to do a project with those forms for the university if you can a tutorial please
Good day i've just starting to use sketchup im having trouble When i render it using twilight the materials become white (3rd render, my first and 2nd render was okay but my 3rd isn't) i don't know maybe i did something wrong in the sketchup (Pls. Help my due date is next week :( )
Good lord, I have been using Sketchup to make houses for almost 10 years. Just as a hobby. Some of the simple stuff you are doing, I never even knew was possible.
Your vides are so helpful... thanks you so much for putting them up. I am still learning and often find all the solutions I need in your videos One question - How do I hide/unhide all the tags at one go (rather than doing it individually), my project now has more than 120 tags and more are getting added, could you recommend any best practice on adding, managing tags please!
hello! do i group the rectangle with the lines? or is that a separate grouping? I tried to make the rectangle a group but it doesn't have the option to do so. when I grouped it with the lines and tried to do the flowify, it said error.
Nice tutorial! I have a 50 gallon drum, standing upright and I am putting a pipe into the side of it, horizontally, off-center, and I want to cut the hole for the pipe precisely (in real life)... So, once I extrude the pipe cut out of the drum, how do I print a flat representation of the hole created for the pipe, that, when printed, will look a bit like a teardrop shape, which I can then place as a template on my actual 50 gallon drum for cutting the hole?
FYI - sketchucation site is inaccessible; Cannot contact site admin: 'Could not instantiate mail function' error. Password reset not working, perpetual "user name already in use' message regardless of newly generated random passwords.
Hi there, I'm following all your steps step by step, I've looked at everything that could go wrong but it still isn't working for me. A grid appears but my wooden slats disappear so when I place new slats on top and do absolutely everything on screen there is still no result. Any ideas?
I have a question! When I try to impose grid, nothing happens and when I run flowify, it says Input Error: Not enough input. I'm confused because I have redone the shape from scratch multiple times, and no dice. I was wondering if you had any input?
Once we copy an element using the move tool and Ctrl, there are 2 things we can do 1. Type x4 and this will create 4 more copies of the element you've copied at the same distance interval 2. Type /4 and this will evenly divide the space between your original element and copied element, having equal distances between each
Hi everyone! Let me know if you have any questions in the comments below! :)
hi thanks for the video please how can we make this forms like this interesting example from Rojkind architects www.plataformaarquitectura.cl/cl/02-22803/museo-del-chocolate-nestle-rojkind-arquitectos?ad_medium=office_landing&ad_name=article I want to do a project with those forms for the university if you can a tutorial please
Good day i've just starting to use sketchup im having trouble When i render it using twilight the materials become white (3rd render, my first and 2nd render was okay but my 3rd isn't) i don't know maybe i did something wrong in the sketchup (Pls. Help my due date is next week :( )
Good lord, I have been using Sketchup to make houses for almost 10 years. Just as a hobby. Some of the simple stuff you are doing, I never even knew was possible.
That's pretty cool. Being a woodworker who enjoys classic stuff, I doubt I'll use this a lot. But it's always nice to have the knowledge. Thanks!
Crystal clear tutorial. Thanks man !
Your vides are so helpful... thanks you so much for putting them up.
I am still learning and often find all the solutions I need in your videos
One question - How do I hide/unhide all the tags at one go (rather than doing it individually), my project now has more than 120 tags and more are getting added, could you recommend any best practice on adding, managing tags please!
Huge thanks Justin!!!
flowify and curviloft seem very interesting, I'll try to look at those!
They're good ones!
We really appreciate your efforts, can you please send the link to install Flowify and Curviloft and the other most important extensions, thanks a lot
hello! do i group the rectangle with the lines? or is that a separate grouping? I tried to make the rectangle a group but it doesn't have the option to do so. when I grouped it with the lines and tried to do the flowify, it said error.
Can you do video about forged metal elements - monogram, currency???
Thank you
Nice tutorial! I have a 50 gallon drum, standing upright and I am putting a pipe into the side of it, horizontally, off-center, and I want to cut the hole for the pipe precisely (in real life)... So, once I extrude the pipe cut out of the drum, how do I print a flat representation of the hole created for the pipe, that, when printed, will look a bit like a teardrop shape, which I can then place as a template on my actual 50 gallon drum for cutting the hole?
Thanks, From user Thailand
hi i want to just lay lines over the shape, and then concert those lines into tubes....how could i do this?
is flowify still compatible with SketchUp?? cant get the license
FYI - sketchucation site is inaccessible; Cannot contact site admin: 'Could not instantiate mail function' error. Password reset not working, perpetual "user name already in use' message regardless of newly generated random passwords.
Justin you are good... thanks for sharing... stay safe..!
Thanks 👍
What would be the best way to give some thickness to the "skins" you get with curviloft (so they are solids)?
Joint push pull the same way I did with the ribs...
Hi, thanks so much for this video! I can't seem to find 'Curviloft' in the extension warehouse though. Is this still available?
Me either. Any luck?
It's available on sketchucation.com/plugin/1175-curviloft
What if I want to make a weird shape and add windows to that weird shape? Would it still work?
Very good!
Hi there, I'm following all your steps step by step, I've looked at everything that could go wrong but it still isn't working for me. A grid appears but my wooden slats disappear so when I place new slats on top and do absolutely everything on screen there is still no result. Any ideas?
Hi how did you get the extensions, they dont seem to be free for me.....
I have a question! When I try to impose grid, nothing happens and when I run flowify, it says Input Error: Not enough input. I'm confused because I have redone the shape from scratch multiple times, and no dice. I was wondering if you had any input?
Your grouping and/or selection is wrong
Dear Sir.
How can i have this plugin ?
Can you please make a video about ornamation and how to do gothic style models
Like...Christmas ornaments?
What's your motherboard's model number
I have followed the instructions, redone everything, checked my groupings, but it's still saying error. I don't know what's wrong with it.
It just says "error"?
@@Thesketchupessentials Input Error: Not enough input.
Very nice 😄
Thanks 😊
Can someone help me, I can’t use flowify in my sketchup version.. it says UNSIGN 🥺 i really need this plugin
ruclips.net/video/1BFBZB_sQR0/видео.html
it imposes grid for me but says not enough input
Then your grouping isn't right
How do you divide the element to 10 like that? :(
Once we copy an element using the move tool and Ctrl, there are 2 things we can do
1. Type x4 and this will create 4 more copies of the element you've copied at the same distance interval
2. Type /4 and this will evenly divide the space between your original element and copied element, having equal distances between each
❤❤
Thank you +++++
Welcome!
You look a lot like a pornstar named Danny D lmao, it's like he suddenly choose to be a Sketchup youtuber 😂🤭
Please Translate INDONESIAN langguage 🙏