Awesome system. I work as a General Superintendent for a large commercial Drywall and Painting contractor in the upper Midwest . Dollar against Dollar this technique is the best for achieving level 5 smooth finishes. You look at how fast he was able to blast out that ceiling. Now when we do hotels or any other 40,000 sheet job, I have to consider what going to provide the best outcome. Especially now with the new silica rules and the art of finishing be replaced by boxes and electric vacuum sanders, getting a nice level 5 isn’t as easy as it used to be. Talent levels aren’t even close to 26 years ago when the last of the hawk and trowel finishers were in the twilights of their careers. Hands down the best system for today’s finishers.
The guy knows how to jam out a job. I am in the floor care ❤ business 🏭 but if i was a GENERAL CONTRACTOR i would hire this guy within a minnute. Good job dude and thanks for showing us how to do this job. You may not know this but you are helping other local communities glean knowledge by posting this content. For this I give you a 5-star review.
Amazing way to do skim coat!!! I live in New Zealand and i do the same way but I do two coat!! I do the second one very very soft just to fix all the imperfections from the first coat!!!!and I just got my tapetech finishing knife, are amazing tools!!!
Bruno, I just finished 1300 sq. Cement ceiling with electric heat. The cement sucked the water out so stinking fast. Spraying the ceiling with water did not even help. Doing it your way. It would be bone dry when you went running the blade on it. You had to do a very small section at a time. My mud was wet and it dried almost on contact. Really need that blade you were using.
Architects ought to be shot for asking for level 5 drywall on a ceiling. Level 4 and flat paint is sufficient. If you want level 5 , pay for a plaster job. Nuff said
@@nothprokernov7028 Don....people dont put flat paint on ceilings in my area....so we have to...this is my 32 year in the trade....residential and commercial
The kid did a shitty job at that. I would almost guarantee the ceiling will look like shit if he doesn´t sand it by hand with light. I thought the same thing, plaster is the best if you want the whole ceiling skim coated. A level 4 finish done by hawk and trowel with a good painter will beat level 5 all day long.
Well this video show just how quick skim can be.... but have you look closer? Celling was already strait, new coat wasn't even on the corners.... so I'm wonder how long it was take to prep that to that level.
michal skraburski you can’t see from images,but ceilings only had cadex applied to them, and yes, it took less than 5 min to apply cadex since there’s no wiping.
Guys, I’m a General Superintendent for a fairly large Drywall and Painting Contractor in the upper Midwest of the U.S.A. All we do are commercial projects such as hotels, Assisted living , high end condos, office buildings/corporate campuses,and Multi family( Apartments ). Except for the offices, which are mostly acoustic ceilings, we almost always need to do level 5 finishes on flat ceilings in rooms with so much natural light.Even on textured ceilings we’ve adopted fogging prior to texture as our standard best practice in well lighted areas. I can say without a doubt that this method of skimming on average is 20% faster. When you see the actual billing , hour for hour , between a crew that rolls on there skim vs a crew that uses technique shown it becomes immediately clear. Not to mention, we are always doing the jobs floor by floor working from the top down. When I compare schedules I also see the comparison there. Rolling requires guys 20% more time. 100man Hours vs 80 man hours. Etc
@@TheBigLeeg so your one skim coat over cadex is lvl 5? Idk started finishing when i was 14 iam 44 now and never seen a one coat lvl 5 ceiling finish... Yes prolly quicker because of the sprayer but one is dreams in fairy land. Not to be rude just my opinion
@@TheBigLeeg and one more thing are you the super tells everyone how to do it or the super that actually worked to get that job? Before you answer they i haven't met a super that actually worked for his knowledge in a long time if read you read in a book dosent mean you know how to do it
Tony Locker I’m not a General Superintendent because a got a degree , or I’m somebody’s brother or son and what not. I scratched and clawed my way to the top of the heap. I earned my position via merit. Outstanding performance and results. I’m a journeyman Carpenter by vocation . Which is why I can take a set of prints and specs then apply those to a site. All I’ve ever done is drywall from framing through finish. I started mudding with a hawk and trowel before the industry took up boxes. But clearly you aren’t the type to expand your horizons. I’m the type to tell a guy his work looks like shit or his light check isn’t where he makes a horseshit job look right . Or let a guy get away without pre fill or not tape tight to pipes and outlet blowouts. I’m the guy you would hate or love because before you ever step foot in a unit every single screw better be countersunk and or pulled. The butt joint netter not shoulder etc
Aí brunera… ficou fera mesmo estou aqui no Texas e precisei fazer o mesmo, com a máquina da graco provavelmente IV ajudou dimais. Outro nível de facilidade. No mais parabéns da gosto de ver profissional fazer a arte
Danny..., You can even roll-on compound, if you don't have the more expensive sprayer, yes, you can roll mud like paint, then skim it...very cool and time saving especially on ceilings. I have several knives just like this 4 footer which is the largest todate by TapeTechPro, and with some practice, anyone can skim like a PRO, even you, as the knife does most of the work. Good luck! MGTOW.
If you want a perfect level 5 try spraying, then use a notched trowel to level out the mud perfectly, then a magic trowel or knockdown trowel to smooth it after, they’re really flexible with round edges so you don’t leave any over lapping edges.
Is always. Nice to see new ideas even if needs detail at the corners and touch up here and there you save lot of time great job don't leasen to the haters i bet they cant even use a two inch knives
This ceiling would be a great candidate for Sheetrock TuffHIde Level 5 surfacer. Get your ceiling to a solid level 4, then cross-hatch spray the material 18-20 mills thick. Come back the next day for a *very* light sanding and to check for any mishaps and....voila! Beautifully smooth level 5 surface with very little extra labor beyond lev-4 finishing.
Krause Commercial Painting thanks for sharing your experience, I have used hide tuff before and I was happy with results, but spraying joint compound like I do eliminate this last process, those ceilings were only getting 3 coats, on this video is level 2, level 3 I spray the joint and wipe with regular trowel or knife by hand and it looks great, hide tuff I use when client wants level 5 over new Sheetrock with 3 coats and polished, if taping is done good it looks amazing 😉
Someone said it looks like midtown Manhattan but it looks more like the George Washington bridge in the background from the Jersey side? Maybe even Chicago, ldk. This brings back memories of working at local 530. We were required to hang one roll of tape per hour. The units averaged about 60 corner bead per unit. Only hand taping allowed. We worked 7 hour days and had to have seven rolls of tape hung by the end of the day. If you complained about the quota to the union, you got fired. Racketeering at its best 🤕
You guys ever use that machine to where you don’t have to wipe ? If you put about half water half with half bucket of compound the shit is like paint there’s no wipe . It’s not a true true skim coat but it makes the wall white and looks like a skim coat lol you guys are good and is that Roosevelt island you on ? I was working over there building the new college .
Anybody knows what there doing if SAND IT MORE THAN ANYTHING ELSE damn still amazed by how much everone enjoys sanding... Hone you finishing skill not so much sanding skill damn people
If you dont have some one behind you in any weather just means your greedy or lonley... And like to sand. Damn what is with all i can finish anything as long as sand the job 12 times plain crazy
Gabriela Gonzalez in this case I sprayed joint compound to fix concrete unevenness. But if you have new drywall the tuff hide can be a good option if walls are in a good shape.
i do the same system but lay that knife down more and you wont have so much build up that you need to keep cleaning the blade. you are too short so need a longer pole. just wiping caulking if your finger is too straight up youll get the buildup
Trevor, I’m a General Superintendent for a commercial drywall and painting company in the upper Midwest. We do primarily hotels and multi family dwellings Like apartment complexes and high end condos. This technique is top notch. In terms of outcome , wiping it down will eliminate all the dimples and other inconsistencies you’re eluding to. After that it still gets sanded. Dollar against dollar, this technique rocks.
No you can't with your level 5 primer bullshit Only one step saved You can't call this 2 steps or levels of finishing either either! As step in the finishing process this is a two-step part of one step of the finishing process only the final step of level 5 is sometimes eliminated by good "3 step smoothwallers" + your. "special $60 a bucket primer!" I know I'm smarter than you I'm also a better finisher to without seeing your work or reading rest of your comment so as I said all you're doing is cutting out these two steps of one step of the process that this guy is showing us how to do now and his finished is superior to your love your level for primer because it never fails in that primer still sometimes does regardless of your skill and your primer
An adequately fish finish drywall job to level 4 plus to skim coat is always superior nothing beats it all you can do is try to match it with your special paint. 20 years in the game the best residential smooth while you've ever seen and we did it skipping a little 5 to but it's still not Superior to level 5 or equal so all you guys f*** off with your special primer
BarryN McCockinner yes you can. I have been a plaster/finisher for 27 years. If you have to skim a whole ceiling twice to make it look great then find a different job. Two coats and skim is all it should ever take if you know how to run a trowel. This guy spraying this whole ceiling then skimming it is worthless. You need 2 guys. A guy should be wiping it off right away. I can already see dry spots when he wipes it.
Bienvenido, es un trabajo de producción. Y probablemente no sea su decisión. Estos trabajos van al mejor postor para un trabajo aceptable. La tecnología está llegando a cambiarlo todo. Todos necesitamos aprender a programar. Que estes bien. Cortesía de Google Translate.
Texspray Mark 4, 5 and up can spray mud through an airless based spray system. The other texsprays can spray texture but only airless sprayers can pressurize to 3000-3300 PSI which is need to spray compound or Level 5 surfacer out of a paint gun
Yes just thin it properly and use a tip your rig will keep up with. Probably a 621 would work. I’ve put all kinds of stuff thru rigs for 30 years now. Just make sure material isn’t too abrasive. 👍
Then your obviously an Idiot about hard work and time invested skimming this shit by hand, or "Roll on-Wipe off" techniques are labor intensive is this is this is the only way to achieve a perfect Smooth Wall finish it has to be done for the right money. Or?????? So you must be jealous that you didn't make this video If you're not what I just said you are cuz you're probably drywaller and you didn't think of it first?!
@@brunogodinho6326 fuck yea! (Liked your post soon as notified no time to reply!) Love ya fer seeing that one as I did! I straightened him the fuck out had him back peddling like a democrat who WAS talking how the Russian Collusion etc was the GOSPEL until 2.8 weeks ago🤔😂😂😂
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
Awesome system. I work as a General Superintendent for a large commercial Drywall and Painting contractor in the upper Midwest .
Dollar against Dollar this technique is the best for achieving level 5 smooth finishes. You look at how fast he was able to blast out that ceiling.
Now when we do hotels or any other 40,000 sheet job, I have to consider what going to provide the best outcome. Especially now with the new silica rules and the art of finishing be replaced by boxes and electric vacuum sanders, getting a nice level 5 isn’t as easy as it used to be. Talent levels aren’t even close to 26 years ago when the last of the hawk and trowel finishers were in the twilights of their careers. Hands down the best system for today’s finishers.
The guy knows how to jam out a job.
I am in the floor care ❤ business 🏭 but if i was a GENERAL CONTRACTOR i would hire this guy within a minnute.
Good job dude and thanks for showing us how to do this job. You may not know this but you are helping other local communities glean knowledge by posting this content. For this I give you a 5-star review.
Samsng Device thanks
Man those screws are magnificently perfect . Smooth work bro .
Mario Ochoa thanks brother
Amazing way to do skim coat!!! I live in New Zealand and i do the same way but I do two coat!! I do the second one very very soft just to fix all the imperfections from the first coat!!!!and I just got my tapetech finishing knife, are amazing tools!!!
All the one and 2 coats jobs are people that plan on a slow miserable death from sanding more then coating...
Nice headlamp. Im going to get one of those
Hahaha
Bruno, I just finished 1300 sq. Cement ceiling with electric heat. The cement sucked the water out so stinking fast. Spraying the ceiling with water did not even help. Doing it your way. It would be bone dry when you went running the blade on it. You had to do a very small section at a time. My mud was wet and it dried almost on contact. Really need that blade you were using.
Architects ought to be shot for asking for level 5 drywall on a ceiling. Level 4 and flat paint is sufficient. If you want level 5 , pay for a plaster job. Nuff said
Don Ireland I agree 100%
@@nothprokernov7028 Don....people dont put flat paint on ceilings in my area....so we have to...this is my 32 year in the trade....residential and commercial
Texture is for poor people!!!!
Lv 4 or slate finish work good and pretty close to a smooth wall
..
The kid did a shitty job at that. I would almost guarantee the ceiling will look like shit if he doesn´t sand it by hand with light. I thought the same thing, plaster is the best if you want the whole ceiling skim coated. A level 4 finish done by hawk and trowel with a good painter will beat level 5 all day long.
Skilled hard working man. Great to see. Ty!!!
Mark Benson thanks Mark. 😀
@@brunogodinho6326 I'm a contractor who loves to learn from other skilled Craftsman. Ty!!!
Mark Benson RUclips became a great tool for me to learn, that’s the reason I started sharing content as well. Stay safe brother 🙏🏻
@@brunogodinho6326 very nice!!!
Well this video show just how quick skim can be.... but have you look closer? Celling was already strait, new coat wasn't even on the corners.... so I'm wonder how long it was take to prep that to that level.
michal skraburski you can’t see from images,but ceilings only had cadex applied to them, and yes, it took less than 5 min to apply cadex since there’s no wiping.
Guys,
I’m a General Superintendent for a fairly large Drywall and Painting Contractor in the upper Midwest of the U.S.A. All we do are commercial projects such as hotels, Assisted living , high end condos, office buildings/corporate campuses,and Multi family( Apartments ). Except for the offices, which are mostly acoustic ceilings, we almost always need to do level 5 finishes on flat ceilings in rooms with so much natural light.Even on textured ceilings we’ve adopted fogging prior to texture as our standard best practice in well lighted areas. I can say without a doubt that this method of skimming on average is 20% faster. When you see the actual billing , hour for hour , between a crew that rolls on there skim vs a crew that uses technique shown it becomes immediately clear. Not to mention, we are always doing the jobs floor by floor working from the top down. When I compare schedules I also see the comparison there. Rolling requires guys 20% more time. 100man Hours vs 80 man hours. Etc
@@TheBigLeeg so your one skim coat over cadex is lvl 5? Idk started finishing when i was 14 iam 44 now and never seen a one coat lvl 5 ceiling finish... Yes prolly quicker because of the sprayer but one is dreams in fairy land. Not to be rude just my opinion
@@TheBigLeeg and one more thing are you the super tells everyone how to do it or the super that actually worked to get that job? Before you answer they i haven't met a super that actually worked for his knowledge in a long time if read you read in a book dosent mean you know how to do it
Tony Locker I’m not a General Superintendent because a got a degree , or I’m somebody’s brother or son and what not. I scratched and clawed my way to the top of the heap. I earned my position via merit. Outstanding performance and results. I’m a journeyman Carpenter by vocation . Which is why I can take a set of prints and specs then apply those to a site. All I’ve ever done is drywall from framing through finish. I started mudding with a hawk and trowel before the industry took up boxes. But clearly you aren’t the type to expand your horizons. I’m the type to tell a guy his work looks like shit or his light check isn’t where he makes a horseshit job look right . Or let a guy get away without pre fill or not tape tight to pipes and outlet blowouts. I’m the guy you would hate or love because before you ever step foot in a unit every single screw better be countersunk and or pulled. The butt joint netter not shoulder etc
Aí brunera… ficou fera mesmo estou aqui no Texas e precisei fazer o mesmo, com a máquina da graco provavelmente IV ajudou dimais. Outro nível de facilidade. No mais parabéns da gosto de ver profissional fazer a arte
I roll my finish with 3/8 inch nap instead of using my blade....i like the blade though....very nice brother
You roll it then trowel it flat?
Very impressive. Skim coating is a tough technique to master. Never knew you could spray compound. Great job.
dannywfd thanks Danny, I will be making new videos and will post them soon. 😀👍🏼
Danny..., You can even roll-on compound, if you don't have the more expensive sprayer, yes, you can roll mud like paint, then skim it...very cool and time saving especially on ceilings. I have several knives just like this 4 footer which is the largest todate by TapeTechPro, and with some practice, anyone can skim like a PRO, even you, as the knife does most of the work. Good luck! MGTOW.
Come down to Brazil and teach the guys over here bro!!! Heck... you're one of us! Kkkkkkkkk
Marcelo Gouveia get me the work there and I go, will bring all machines with me. With 20 years of drywall experience there is a lot I can share. 😊
Man thats a nice job! Use the whole pole and your arm length though. It helps with the consistency.
Brian Keyes yes, great tapetech tool, highly recommended!
I love the hardhat!
I bought skully hat with lights Amazon kind bright.
Great work! I love your spray technique.
Graco Mark V is about a $10,000 machine but a huge time saver, money maker and a lot less psychically demanding than a Hawk / Trowel approach.
I'm assuming you removed all the filters in both gun and unit? What size tip are you using?
Gary Spaulding yes, no need for filters when working with compound, used tip size 531.
@@brunogodinho6326 thanks
this guy is a genius
Waoo so fast and good job
This the level of caliber that can spot screws by walking along a wall on a five gallon bucket
Nice job! I like your drywall knife holder!
Y D thanks 😊
Nice view outside the window :)
Nice job, done quickly - can't ask for more than that!
AK Drywall Guy thanks! 😀
Nice job.
Emeka Nkeze thanks
If you want a perfect level 5 try spraying, then use a notched trowel to level out the mud perfectly, then a magic trowel or knockdown trowel to smooth it after, they’re really flexible with round edges so you don’t leave any over lapping edges.
Terrible idea!
Omg god finally some one that sounds like there good at what they do ... Bout time 👍
@@SOLDOZER ya maybe for someone that doesn't know how to do it!
I never seen folks spray Mudd most folks use Roller. Two blades and a helper keep blade clean faster less bending.
I'd want to see what it looks like once it has dried.
Wet mud ALWAYS looks good... lol
Thank you. I'm have mark 5. Am is Russia
Stay the f*** out of Crimea
@@grizzly8859 shut the f****** up
Looks like one of those million dollar condos on the upper east side of Manhattan
Looks like someone in the country illegally?
I worked midtown Manhattan for many years. Definitely not Manhattan. Maybe Jersey, maybe Chicago?
Is always. Nice to see new ideas even if needs detail at the corners and touch up here and there you save lot of time great job don't leasen to the haters i bet they cant even use a two inch knives
Sweet video, looks like a great job.
Pretty much no mess either. Beats a 18 inch roller, and stilts. Lol
tyler krug Thanks! 👍🏼
Massa mano!!
Ótimo trabalho 👏🏽👏🏽👏🏽
tarcisio henrique obrigado
This ceiling would be a great candidate for Sheetrock TuffHIde Level 5 surfacer. Get your ceiling to a solid level 4, then cross-hatch spray the material 18-20 mills thick. Come back the next day for a *very* light sanding and to check for any mishaps and....voila! Beautifully smooth level 5 surface with very little extra labor beyond lev-4 finishing.
Krause Commercial Painting thanks for sharing your experience, I have used hide tuff before and I was happy with results, but spraying joint compound like I do eliminate this last process, those ceilings were only getting 3 coats, on this video is level 2, level 3 I spray the joint and wipe with regular trowel or knife by hand and it looks great, hide tuff I use when client wants level 5 over new Sheetrock with 3 coats and polished, if taping is done good it looks amazing 😉
@@brunogodinho6326 Hi, what sprayer and tip are you using for the Light mud joing compound.. Thanks a million...
@@joesanchez7920 mark V with 535 tip
Sprayer sounds like the piston is gna blow out of it lol its workin extra hard
Rick White yep, it’s pulling compound, not paint 🤓
@@brunogodinho6326 how does that work you gta thin the shit out of it ? Hows quality of the finish ?
Thank you for the great video.
Someone said it looks like midtown Manhattan but it looks more like the George Washington bridge in the background from the Jersey side? Maybe even Chicago, ldk. This brings back memories of working at local 530. We were required to hang one roll of tape per hour. The units averaged about 60 corner bead per unit. Only hand taping allowed. We worked 7 hour days and had to have seven rolls of tape hung by the end of the day. If you complained about the quota to the union, you got fired. Racketeering at its best 🤕
Robert Stovall that’s manhattan bridge in background
@@joeyi_e1553 definitely NOT the Manhattan bridge
Buen trabajo saludos desde miami
Alien Ayala Del Sol gracias amigo 👍🏼
Nice
You guys ever use that machine to where you don’t have to wipe ?
If you put about half water half with half bucket of compound the shit is like paint there’s no wipe . It’s not a true true skim coat but it makes the wall white and looks like a skim coat lol you guys are good and is that Roosevelt island you on ? I was working over there building the new college .
Looks good on new drywall but bet it won't work when changing textures
Yeah I would roll on a thick coat and smooth off
Multiple coats is what I've found. When you're hiding priors, it takes a couple adjustments.
Good idea for stomping ceiling! That might make a come back LOL
Only if take time to mask everything i mean everything off. Unless you the type that likes to sand...
you should come to Ottawa and I will will teach you how to do it the right way
Commercial job in Jersey? Perfect!
He knows wtf he’s doin I seen that before keep it up bro
Christian Diaz thanks brother
Anybody knows what there doing if SAND IT MORE THAN ANYTHING ELSE damn still amazed by how much everone enjoys sanding... Hone you finishing skill not so much sanding skill damn people
Buenas ideas, pero no me termino de conbencer, le falta en la rociada para que le quede bien parejo
Paintingcolors Andremodeling
Y las luces y ventilación por eso después van a ser hoyos para La Luz not good
Awesome We paint the similar room min 1hour )
Alex Melnich 👍🏼
Good job, can you make video working on walls?
LAL 2037275114, I have more videos working on walls as well.
What size of tip you are using?
And do you leave all filters in the machine /gun? Thank you..
Brooklyn.... 💪🏾
Nice job
Adrian Posteuca thanks brother
Here in Florida you would need a guy working the blade behind you because the mud would dry that fast
It doesn't matter where you're from it is about how much water your mud and drying time is, lol... Thats the silliest comment Ive ever seen.
If you dont have some one behind you in any weather just means your greedy or lonley... And like to sand. Damn what is with all i can finish anything as long as sand the job 12 times plain crazy
@Blake Ranew just get the light weight id you slick with less crackage... Of course the soap does add a pleasant aroma while you work!
@@cptmuska lol some people cant see the whole picture lol
Fala amigo, trabalho com pintura aqui na Australia, e preciso dar o undercoat na superficie antes de aplicar level 5?
Lots of compliments without even seeing a closeup of the final product.
Sweet head light!
Mack Woodcock thanks
Yea, where did you get it?
.... amazing ..................
Please tell me what you used to spray the mud on with?
Graco mark v
Are you spraying All Purpose? What about Tuff Hide?
Gabriela Gonzalez in this case I sprayed joint compound to fix concrete unevenness. But if you have new drywall the tuff hide can be a good option if walls are in a good shape.
@@brunogodinho6326 Thank you! :)
Wouldn't a couple of spotlights illuminating the ceiling show missed spots.
He isnt wearing a SHERWIN WILLIAMS shirt. 👕
Samsng Device 😂
He's wearing a TRUMP shirt. He LOVES Trump!!!1
No esta mal la idea yo lo usaria solo para skimear ya que en el skin no le dejas mucha maza
That technique is old in AZ Only for level 3 or 4 but not for level 5 😂
How much water or additive do you have to add to be able to spray compound threw a sprayer
The Mark V can spray mud right out of the box.. thin only for the application you are doing at the time.
You take off filters on machine and sprayer
Parabens jovem!
I don't get it. Why spray it on to take most of it of again? Why not just plaster it properly and still use the spat?
Just let that over spray get all over those windows. That shouldn’t be a problem. Lol
It’s not paint
Mask tape and plastic nom nom nom on those profits
What size sprayer tip are you using and what brand mud?
i do the same system but lay that knife down more and you wont have so much build up that you need to keep cleaning the blade.
you are too short so need a longer pole.
just wiping caulking if your finger is too straight up youll get the buildup
And they put so much mud on that the lid is no longer flat. Flash a halogen light on it and the tears will start to flow.
So much mud? It was that thin that I thought it was PVA at first. You’re a fucking dumbass who obviously knows fuck all
Trevor, I’m a General Superintendent for a commercial drywall and painting company in the upper Midwest. We do primarily hotels and multi family dwellings Like apartment complexes and high end condos. This technique is top notch. In terms of outcome , wiping it down will eliminate all the dimples and other inconsistencies you’re eluding to. After that it still gets sanded. Dollar against dollar, this technique rocks.
Good idea
More vids???
Duston scharbrough yes
top top rapidez
Orivelton Luciano da Silva obrigado 😊
You can achieve the same quality finish with 2 less steps and complete the jobs faster.
No you can't with your level 5 primer bullshit
Only one step saved
You can't call this 2 steps or levels of finishing either
either! As step in the finishing process this is a two-step part of one step of the finishing process only the final step of level 5 is sometimes eliminated by good "3 step smoothwallers" + your. "special $60 a bucket primer!"
I know I'm smarter than you I'm also a better finisher to without seeing your work or reading rest of your comment so as I said all you're doing is cutting out these two steps of one step of the process that this guy is showing us how to do now and his finished is superior to your love your level for primer because it never fails in that primer still sometimes does regardless of your skill and your primer
An adequately fish finish drywall job to level 4 plus to skim coat is always superior nothing beats it all you can do is try to match it with your special paint.
20 years in the game the best residential smooth while you've ever seen and we did it skipping a little 5 to but it's still not Superior to level 5 or equal so all you guys f*** off with your special primer
BarryN McCockinner yes you can. I have been a plaster/finisher for 27 years. If you have to skim a whole ceiling twice to make it look great then find a different job. Two coats and skim is all it should ever take if you know how to run a trowel. This guy spraying this whole ceiling then skimming it is worthless. You need 2 guys. A guy should be wiping it off right away. I can already see dry spots when he wipes it.
Chido.
No hay mejor trabajo que hacerlo a mano así está muy mal no alisas bien la ventaja es que ganas tiempo pero no hay buena calidad
Tienes muchas razón me muero de hambre asiendolo así
Bienvenido, es un trabajo de producción. Y probablemente no sea su decisión. Estos trabajos van al mejor postor para un trabajo aceptable. La tecnología está llegando a cambiarlo todo. Todos necesitamos aprender a programar.
Que estes bien. Cortesía de Google Translate.
No pude ver esta terminación clara para darte el merito
Me distes una idea para poder terminar mas rapido
I am from nepal i want to buy this kind of tools please suggest me . I will wait for your help
how is called the "belt" that you put youre amall knife in
The best skin coat is with spatula
Ta chingon mahe ¡¡
❤excelente 😊
Which graco is that one? Tex spray or regular?
good video,thx for sharing.
just wondering how to do the sanding?
Adam Guo all you have to do is a light polish and it is done. 👍🏼
THX for replying. 220 grid sanding pad and sanding by hand?
Festool Planex
HI，have you ever tried to sand level 5 with planex？
that's is fast.
Isso é em Manhattan? Moro em Newark também trabalho com isso, há 4 anos já
Diego Carmona Brooklyn, onde vc esta trabalhando?
I got a gracco ultramax 695 2 ....can i spray compound also?
No
No
Texspray Mark 4, 5 and up can spray mud through an airless based spray system. The other texsprays can spray texture but only airless sprayers can pressurize to 3000-3300 PSI which is need to spray compound or Level 5 surfacer out of a paint gun
Yes just thin it properly and use a tip your rig will keep up with. Probably a 621 would work. I’ve put all kinds of stuff thru rigs for 30 years now. Just make sure material isn’t too abrasive. 👍
Hello. I am from Algeria. I want to know how many cubic meters can this be The machine worked in 8 hours
100-800
LUNCH TIME. TEEEEEEEEWIIIIIIT
Alt zemin düz deyilse hep çizgi birakir demi
Anyone realize the sheet rocked the circus lights into the wall?
@Ruben Rosario lol, guess they're just gonna have to be cut out. Stupid!
Can you short the video so l don't have to skip.
good info in the video. thumbs down for vertical video.
GOD bless ! I don't know brother all that spraying in the air ? In your lungs on your eyes and skin ?
HIM HAVE MASK ON
Hi
Where are you from
And where are you working
Hi, I am from Brazil, but I live and work here NY, CT.
a/s/l
👌 🙌
Whys he wearing his sister jeans
Couple paisas would’ve coated that in no time ahhhRaza!
And his mums high heel boots
fabuluz hell yhea 😂 lol
Fresh Start Fitness 😂
can you check my Instagram. I'm very professional, only check and follow me if you want
ELT Taping
QUANTO TA VALENDOUMAMAQUINA DE PROJETARMASSADESSAAI?
alex dmitruk essa mark V começa com 7,000, mas dependendo dos acessórios vai a 12.000
I saw this for free and I want my money back
Then your obviously an Idiot about hard work and time invested skimming this shit by hand, or "Roll on-Wipe off" techniques are labor intensive is this is this is the only way to achieve a perfect Smooth Wall finish it has to be done for the right money.
Or??????
So you must be jealous that you didn't make this video If you're not what I just said you are cuz you're probably drywaller and you didn't think of it first?!
BarryN McCockinner yep, those types of haters, 😂
@@brunogodinho6326 fuck yea!
(Liked your post soon as notified no time to reply!)
Love ya fer seeing that one as I did!
I straightened him the fuck out had him back peddling like a democrat who WAS talking how the Russian Collusion etc was the GOSPEL until 2.8 weeks ago🤔😂😂😂
Your comment let me know you couldn't have ever touched anything relating to drywall!
looks like you are in New York?
modernwize Brooklyn
sanding sucks mud will dry really fast out here in colorado springs must have a guy rite behind ya .its a dry heat
It's not a true level five though....
I wonder what the sand job looked like