DIGITAL DASH DISPLAY SIM RACING DIY
HTML-код
- Опубликовано: 15 окт 2024
- Make this easy dash display using a nextion 4.3" display and free SimHub software. Great addition to your racing sim rig.
It is USB, stand alone and can be used in combination with any steering wheel - Logitech, G25, G27, G29, G920, Thrustmaster, Fanatec, or OSW.
The display works the same as the Gear Indicator we made in the last video. It just uses different templates and mapping files.
The templates are able to be customized, you will notice the 599xx and a GT3 dash also in this video.
Parts List
-Nextion Display ebay.to/2U1ZvH7
-USB to TTL Module bit.ly/3Q9AYvV
-Wires included with display.
-Carbon face plate - ebay.to/2L5af3i
-M3 bolts+nuts ebay.to/2O2KRuO
-Soldering Iron BG bit.ly/3Q9vQI8
-Solder BG bit.ly/3zQWksI
-Best soldering Iron ebay.us/fqH7JZ
This site contains affiliate links for which I may be compensated
WIRING
--------------------------------------------------------
DISPLAY--------WIRE----------MODULE
--------------------------------------------------------
GND-----------BLACK------------GND
RXD---------- YELLOW -----------TX
TXD-------------BLUE---------------RX
+5V---------------RED---------------VCC
This build is working and tested in Assetto Corsa and Dirt Rally.
Thank you for watching and being a part of the channel.
Your comments and questions are all welcome.
Please ask any question about the design, build or parts used.
Also share with others who might like to build this project.
Check here for other SIM HACKS, MODS and DIY
/ @amstudioprojects
|SimHub | Credit to Author: Wotever|
|Credit to Butonz for the extra templates|
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
creativecommon...
Dude your videos are soo satisfying to watch, keep it up and good luck with the channel!
Thanks Donald Pump!
amstudio Please you could put in the videos where you bought the materials to make the videos complements
www.amazon.com/Makerfire-Nextion-Screen-Performance-Display/dp/B013E3QHNS/ref=sr_1_1?ie=UTF8&qid=1489484686&sr=8-1&keywords=Nextion+Display+4.3
www.amazon.it/SunFounder-FT232RL-Adapter-Arduino-Raspberry/dp/B01K1RQE38/ref=sr_1_1?ie=UTF8&qid=1489484748&sr=8-1&keywords=FTDI+FT232RL+USB+to+TTL+5V+Module
100% agree
I know this is Old by you tube standards but i must say your videos are so well made that they are easy to Follow,. Thanks for doing these
Mate your videos are great. Now just to get my lazy ass out of my chair to order the parts and build it😂
Thanks man!
I Can't tell you this enough times, but I do anyways. LOVE YOUR VIDS AND KEEP UP THE GOOD WORK. Its simply amazing. Thanks for all of this!
Thanks so much!!
You really make this stuff look so easy, really enjoying your videos. Good job
Thanks!
the download link is not valid anymore. anyone know of where to download this simhub dash from?
And You have a great videos about racing simulator gadgets. I so inspired ! Thank you a lot :)
Thanks!
amstudio Can I get your help with some pedals i am doing?
Waw Fantastic work.
A question can I use the same setting even if I play console? I have a Playstation 4 and a Thrustmaster T300 wheel, I'd like to learn how to make my own custom chainrings.
Thanks a lot and congratulations
Hello is this working with arduino nano instead of the USB TTL module?
Not sure if you will see this, But do you HAVE to have simhub open for it to work? Because im wondering if im able to load data onto a arduino or something for the games and it detects what game is open and start the telemetry data, instead of having simhub as a dependency
Esse Display pode ser mudado, com outras informações? Como temperatura de pneus, motor ou classificação e voltar para marcha, velocímetro e tempo? Obrigadp parabéns pelos vídeos!
Got my screen all sorted thanks for the video. Have you figured out a way to use key bindings to scroll throw the the display?
Does this also work with the smaller 3.2 inch display, Nextion NX4024T032 ?
Can we use it and install to a motorbike?? Please make a video hownto attach fuel gauge,speedo etc
I made this and I can't thank you enough great job. I am having a small problem that maybe you could help me with. the screen works great but every now and then it reverts back to screen one so when I'm looking a lets say the time screen it will go back to the rpm screen by itself. Any ideas why this would be happening? Thanks again for a great video.
Where did you get your screen from if you dont mind me asking??
Amigo qual display e arduino está usando ? Oque mais seria necessario alem disso ? Parabens pelo trabalho,e desde já obrigado !
am i doing something wrong. I have to load a new dash every time i wanna change it. Is there a way to load a few at a time then scroll through them on the display
I did connect the same usb-to-serial adapter to the Nextion 4.3" display and did the same as in the video. I could upload a dashboard to the screen but when i run Simhub and apply my Template nothing happens. The screen does not change atall. When i play a game like F1-2017 i get only static values like Gear "N" and Speed "999". These values don't change when driving. I did try other dashboards but they do the same. I noteced that you have an older version of Simhub. Could the newer version create problems? Please help me!
Hi, i never used a arduino, just raspberry pies. How you get the Informations to the Arduino: Is he connected by USB with the Computer all time? And how can the Buttons used by the Software/Game: will they Displayed like a USB-Joystick in the Setup-Area?
Your videos are the best! Just simple, good looking and very instructional. So satisfying to watch!
Here is a challenge (if it's possible): one of these displays as ETS/ATS map display. It's possible to do it?
Henry M sadly no nextion can only use kind of placeholders so it's not possible to display a map
i have purchased a 7 inch nextion display and am trying to follow along with the video, but when i go to upload it just says "connection failed" "forced interrupt" was currious if you have any suggestions
Have you had any luck with correcting the error you received? I am seriously considering making something like this.
i have the same problem. did you resolve it?
Same problem here, can’t seam to get it to connect to usb port
@@GMCRaptor did u solve it?
@@Christopher-yl1fd Did you figure out a fix for this? having the same issue
man thank you so much for these videos. You saved me so much money and you set up is sooooooo cleannnnnnn. RESPECT TO YOU
Hi matey, the racedepartment link is broken.
Can something like this be plugged in to the XBOX one and used in conjunction with the g920?
Can i add to the 'USB to TTL Module' a led-bar with gear-indicator AND the 'Nextion Display' at the same time? Or do i need a differnet module for the led-bar?
Dear Amstudio, congratulations for your videos, i made 4 projects with your indications, the last one this dash display, and works fine, but i have a little problem.... how i can change the screen? I works only with the first but for example how i can put the Ferrari 599XX? I tired but i not know how made.
Many thanks for your support.
Kind regards
Can you swap out the (rather expensive) touch screen for another? Aliexpress have screen over half price but without touch.
Hi i bought a lcd of raspberry with hdmi and usb your program is valid to only connect it by usb? Thank you
@amstudio any chance you read this, the board that you used was an Arduino Nano? I get nothing when I search for a usb tll module
You are a really TOPGUN! Game compatibility of the software? (apart the ones shown in the video)
Cool stuff! Is there anyway the display can be mounted onto a steering wheel?
if you add magnets to your wheel base as well as the case you could pull that of pretty easily
would it be displayed here instead of the lap time is the mileage or truck speed in ets?
I wanna make stuff like this for a car? but I'm a total newb. I'm trying to learn all I can about electronics. . maybe some day I can .. great video.
What a great channel! Deserves more subbers. Keep up the good work.
Thanks mate!
Hi i would like to build this awesome display but the link isnt valid could someone please post here new link so everyone could download it?
man i wish you were as big as those fake youtubers out there!
Hi the usb cable that you conect, is not de regular usb cable? because is smoller de swicht. what cable is it?
sorry for my english
hej amstudio nice Video and thx for Sharing , but i have a question ...
will it work with my old Sony Xperia sgp512 Display? when yes can you Tell me what i have to do? Thanks!
Your channel is killing it on these guides. can I ask, where do you get all of your carbon fiber and how do you cut it?
Ordered an A4 sheet of carbon fiber 3mm. Cut with power tools then refine the finish by hand.
This works on ps5?
Hola, una pregunta al modulo usb to btt se le puede agregar botones y un analago axis de un joystick? Y si se pude se puede controlar el sim dash con los botones y el joy axis
Hey great Videos. I used one of ur vids to make a RGB Matrix/Buttonbox combo. Thanks a lot for that.
I have a few questions on this video: could this also work with a NANO ? and could it also wirk with other displays ?
What is the specialty of those Nextion displays ?
Thanks again and best regards from Germany,
HNY, Tim
Hi, great video. The face plate is not available fromt he site you suggested. I can't find it anywhere else. Do you have any suggestion? Thank you
Try this ebay.to/2L5af3i
Hi mate, I am building similar display system but integrated into a F1 wheel/ RIM.. Do you know what controller I can use that will connect the Nexton 4.3" with all my buttons and switches eg Arduino Nano ??
I can send you a pic if you like... I want to have both the screen and the buttons / switches on the same controller so only one USB connection... Thanks, Ale
Hey @amstudio
I picked up the plans for the formula wheel from your site and it didn't come with anything regarding the display setup. Is this the display that mounts in the Formula wheel rim you designed? THanks!
Nevermind, I'm a durp. I just noticed you had this video linked in the comments of the Formula wheel build video. *Facepalm* and cheers
You are truly a very talented guy!
I got an android phone that doesn't work. I wonder if I can couple it's display with arduino?
Can you use other displays? The Nextion one is hard to get in the UK...You can get one shipped from China but they're soo expensive and probably poor quality.
Hello friends!! I am amazed with these videos, and I have launched to make an f1 steering wheel with my 3d printer. I have a question, I don't know if someone could solve it, how is the connection between the tll module and the arduino promicro made? Or are two different usb cables used to operate the wheel?
Thanks for the video and for the feedback from the community, they help a lot to solve problems. All the best
I just started looking into the f1 build last night. Did you finish yours?
From what I can tell you can run 2 cables to the wheel (one for button controls, one for screen), or put a USB hub in the enclosure to only run one cable.
Hey could this be used in a car if you did an OBDII plug?
hello Amstudio, may I check will you consider to test the DWIN display as dash board screens?
Is the cover self made or can I buy a display with complete case? Can I also use the Waveshare display?
Greetings
FN ---- genuinely you are a genius , love the step by step video , really really helpful , and great clear Quality pitchers , thank you .
Thanks josephzee!
Hey amstudio, do you reckon this will fit into a mychron 4 screen?
Where can I download the sim hub software, because the link doesnt work anymore?
same
Can we use other displays?
What is that tape you are using to mount it together? Just normal doube sided tape? Getting the stuff for this display, the shifter and the 7inch display. Awesome builds :)
Automotive double sided adhesive tape.
Can you easily do it with a cheapest screen than Nextion ? The fact that it is a touch screen isn't important, is it ?
your video are amazing dude keep up with the great work. the first time I see your channel was the g29 steering wheel mod that one was amazing.:-):-)
Thank you !
Hey man, would this mod work as a side screen to use Z1 dashboard ? or it will only be recognized by the software you are using ? thanks !!
Instead of TTL-usb can I use Arduino nano with RGB to work in one usb port
I look forward to your videos. Thank you! Very complicated to do 2 digital panels of 7 segments marking the best lap, last lap?
always impressed with your video .....how you connect all your ardruino mod ( all dashboard, handbrake and sequential shifter) on your PC ..... are you only install one simHub software for all mod, or each mod you should install each simHUB ......sorry my english very terrible....oh one question ......can i replace the display with this Nextion 3.2" HMI UART LCD TFT
Thanks Sang! All the displays run off simhub and plug in separately via USB. Simhub is an application that runs in the background. The analog handbrake is separate has its own programmed arduino controller and then plugs in USB. Sequential shifter is seperate and has its own game pad encoder and plugs in via USB. Yes there are templates for other screen sizes down to 2.8"
ok thank you very much
Can I just buy a small 7" touch screen that connects via HDMI and put the cluster in windowed mode on the second display (the touch screen)?
How difficult would it be to convert this to real world application? id love to build one that can go off of GPS and to reverse the text for glass reflection...
Does it work on consoles?
upload failed I can not upload the dashboard, the compilation is going well and that does not go any further as soon as I want to upload I have the message connection failed. Do you have a solution?
Do you think it's possible to connect this display to a obd2 , so it also works for cars?
Hi amstudio, I would like to do this project, but I can see that theres is genuine and not genuine FDI chips, should I get anyone of those? Or genuine one? Thanks!
Any tip on which of the many FTDI FT232RL controllers to use? Or does it pretty much don´t matter?
Good question, apparently some versions have driver issues, but that can be fixed with and update. Get the same looking one that I used, had no issues connecting.
Would it be possible to mount something like this to the Thrustmaster TM Open Wheel Rim???
Looking at doing an upgrade to it and having a usb bungie cord for PC connection
Which monitors are you using? And what do you have powering all those pixels? :)
Hi, what would be the avantages of a nextion over using a used mobile phone that simhub supports as well?
Well I will try to reply to myself then 😂. This is slimmer, I guess, it does not generate heat as much, quicker startup?
Hi, any chance you can build one of this for a Raptor 700?
Nice creation love it , does it show track map display with live car position on track map area in game ?
Great job! Question, do you think this display can show all the numbers & data of the Aim Mychron 5 dash data logger?
Thank you
Hi there,
where can I get the sript for the SunFounder FT232RL? Or is downloading the software in racedapartment the only software I need?
Just the software only needed.
a question, can we put the digital display and rev light on the same usb port?
Are there cheaper alternatives to the nextion displays out there? 45$/€ are pretty expensive for such a plain display :/
Anton Meyer-Erlach simhub purpose was to provide the cheapest but customisable dashes. nextion are the most expensive devices simhub supports, but there are templates for smaller nextion which costs around 20€ . compared to market solutions it's pretty affordable.
This screen can be used for flight simulator games???Like dcs world???
Legendary mate, would the simhub software enable a manual style circle tacho as well?
Do I have to use the Nexion Display or is any other screen fine ??
Does this work in rFactor and rFactor 2 or haven't you tested it ? Thanks in advance
Question... if I wanted to make one of these for my actual car? Like um... how would I do that?
do you need a nexion display for this or can you take any TFT display?
Wondering if it works for console games as well?
Is there a way to make these 4.3 inch templates into 7 inch templates
Wow that is so cool, nice work. where do u buy all parts from the make all of these?
You have win 10 for uploading the program? My win 10 doesn't recognize the module...
Problem solved, the module is out of order. With a new module it's work perfectly. Thx a lot for the video.
I want to make something like this for a real car, how much harder is that? Awesome video BTW!!
Glad you like my templates :)
Thanks for the templates! They are really nice!
is that an Arduino unit you are using with it?
thanks for this, now i can replicate the Porsche 911 dash!
Bonjour Comment puis je télécharger SimHub NExtion Editor comme dans la video ?
Is everything the same including programming if it’s being used on rfactor 2?
What's the difference from Nextion Enhanced to Basic?
always brilliant Content, please never stop making videos!
Thanks!
You have an amazing channel!!
Sorry if this wasn't the one I was requesting, but the one that I did request I meant like an actual gauge. Like you'd find in most cars from stock. This is still awesome though.
Yep still looking into that project.
amstudio Oh alright, I was just making sure. Just in case. Not that you're obligated to do it 😂
Good day, i just wanted to confirm/ask you about your USB cable. I'm assuming that we need a Male to Male type of USB cable? Thank you for showing us your great work!
Is there a chance for a connection to the PS4 with this dash board?