Это видео недоступно.
Сожалеем об этом.
Amp Research Power Step Installation 2019 Ram 1500
HTML-код
- Опубликовано: 15 авг 2024
- We open up our brand new Amp Research steps for the 2019 Ram 1500 and take you along for the installation process as we get this awesome product installed, also we give you guys and update on what is new and improved in the Hammerdown Motorsports Garage.
Help support the channel and get your official Hammerdown Merch at hammerdownmotor...
Camaro Cover
amzn.to/2VMr0VU
Follow Me @
Instagram / hammerdown_. .
Facebook
/ hammerdown-m. .
For all your beard product needs check out
1740beardbalm....
and use promo code Hammerdown for a 15% discount
Send Stickers for the trailer tool box to PO Box 68 Mohnton PA 19540
Westy @ Westy's Speed Shop
Check Him out @
/ westysspeeds. .
Instagram Spacemountainsupercars
Check out Todd @ TSE's auto accesories
/ tses-v. .
Check out my Sponsors
vortechsuperch...
www.coldairind...
www.diodedynam...
www.p3gauges.com/
www.novistretc...
www.americanau...
6ledesigns.com/
www.tiresticker...
zl1addons.com/
www.gopowerspo...
Need a tune head to JTM Motorsports
The steps look great, but I'd swap out those LEDs for ones the same color as the mirrors. Maybe one of those long underglow strips :D
Thank you so much for this "HOW TO" I just finished installing these on my new RAM and your video was a big help. Would be nice to have a shop like yours but my driveway worked just fine. Well done, thanks again.
You’re the guy I want installing mine!
Very skillfully and thoughtfully done.Great job!
This is the 1st channel I’ve ever seen that you show everything step by step... and everything to the T...very awesome brother...
Thank you I appreciate you watching
Just got my AMP STEPS today thanks for the video I know things to watch for as I crawl around in my dirt driveway installing them
I bought this set for my brand new 2018 Ram 2500 Mega Cab
and they gave me fits to install them! They Do Not Fit.
I followed the written instructions exactly to the letter.
Got all done, was all proud. Put power to them…
And the retracted up under the truck and wedged behind the pinch welds. I worked for hours putting brackets and
linkages on than taking them back off numerous times, I adjusted brackets and
linkages to NO avail. The boards jammed
up and got stuck under the truck every time to the point where I had to remove
the motors and pried them out from under my brand new truck scratching up the
AMP Research running boards. Decided to
call customer service. I called and
spoke with Brian Weaver. I explained my situation and he seemed to know exactly
what happened. Brian said “they got stuck behind the pinch weld right???” I
said Yep!!! He said with a snarky little
attitude “I’ll send you an email that’ll explain what to do”… So I get this email with an eight step
process to remedy the problem. I
followed that set of instructions to the letter again. Well step # 8 said if all else fails take a
hammer and bend the pinch weld seam over to make it fit. I tried but I would have had to bend that seam
over 45 degrees and I didn’t want to go that far with the sledge hammer. Long story short I had to take a 4” angle
grinder, remove ¼” + off the top of the pinch weld seam to get my new $1500 AMP
Research’s running boards to operate on my $70,000 brand new truck. Needless to say I was PISSED!!!! For that amount of money the AMP Research
product should have fit like a glove.
If you are looking to buy a set of nice power retractable
running boards LOOK SOMEWHERE ELSE!
Don’t spend your money here, You will be Disappointed !!!!!
PS… I took the AMP
Research badges off the steps so they don’t get any free advertising from
me. They better run flawlessly for a
long time… If they so much as hiccup I’m
going to unbolt them and throw them into the dumpster……. I’ll definitely let you know…….
Let me know what dumpster you throw them in 😂
I have these on my Silverado. Had one issue with the passenger side bouncing as it got to the lowest point. I called AMP and they gave me some instructions on how to try and fix it but it didn't work so they sent me a replacement arm and didn't need the bad one back. AMP has great customer service.
thats awesome customer service glad they took care of it
Out of all the install videos I watched this one is the best. Thank you.
I just installed this on my 2008 F-15O. I am very impressed by the quality an how well everything fits the factory mounts. The installation on the Ford didn’t have any surprises.
excellent video, I love how you just completely ignored the step when you got in at the end though. 🤣
CronuSurtr lol it needs a lift
Wow! It's amazing,very good power step,if you really have a money you can buy it for your pick up.
Your skills are obvious and what a great video! Keep them coming as we enjoy watching them. :)
That's not fair to have a shop that nice!!! Wow, a lift and all that room??? If I had that set up my frame would be waxed, lol. That Ram is awesome, all the mods you've done are really nice. Great job.
Good job, looks great. Helpful hint: When you want to twist small to medium gauge wire (AWG) use a variable speed drill instead of a screwdriver it is quick and easy to control. I do it all the time when making multi-wire cables. I am thinking about getting a white Laramie Sport so your channel is very helpful.
awesome thanks for watching
FYI...the REVISED kit no longer comes with the relocation bracket.. I had to remove the driver side motor to get it plugged in... advise installing it last..
How did you plug in the driver side motor without taking it back out?? I cant even begin to get the plug on it.. to tight agaisnt the body!
Couldn't have done without the garage walk thru.
Love the cassette tapes above the new vice !!
JOSHUA ZOEBISCH lol glad you noticed I got a bunch from the auction and been playing them in the shop takes me back to when I was a kid
Great. Video thanks. I bought mine from. eBay. I got a great price for them. Hit came with no. Directions. Thanks for video helped me a lot on the install specially for the step lights 😎👍🏽
After installing Amp research power running board on my Ram 2022. I am feeling vibration on my steering wheel. Any idea why this is going on will be appreciated.
came for the install, stayed for the vise
4 years later, how have these power steps held up? My truck didn't come with power steps, does this kit come with the Motor to install?
They are good I have a video on the installation 2 actually
Great Video- I’m going to give it a try myself thanks to you.
This was a great tutorial and I appreciate it but you did not show us how to plug the adapter in under the dashboard at the end and that left me confused LOL
You mean the obd 2 port connection? I actually did this same install a second time on my Rebel it should be in that one
@@HammerdownMotorsportsUSA I figured it out lol but yup everything else I mimicked and it works great
Quality work. I also have 19 Ram 1500 Laramie w/ Black Appearance package and those steps. The only issue I discovered is a vibration in my steering wheel since installed. It's not bad, but annoying. I haven't tracked down the issue yet.
Dylan Riggs wow that’s really weird have you checked the boards to see if they’re loose?
There is an active noise canceling canister on each side right where the support arm for the Amp board step is. You will need a Torx 40 to loosen slightly and angle the canister away from the support bar. The funny thing is that I had a certified dealer for amp install mine and they did not know this. I found this information on the 5thGENRAM forum.
@@juanvargas4641 Hey Juan. That thread you read on the forum was actually mine "Deriggs007" ;)
Juan Vargas
I’m glad I’m not the only one that has had this issue .
At the end, he did not even use that power step 19:40
Lol. Good catch.
Have them on my 2017 Colorado and they are great!
Great video. How have they held up in the winter?
I hate the power ones because it offers no protection when someone is parked next to you and oops there’s a dent in your door because someone opened it too hard or the wind caused it
DISTRESS
I’ve read if you apply pressure to the boards they will stay down until you open the door again.
Great job- keep that hammerdown!
Installed steps for truck and then didn’t use them to get in. 😂😂😂. Totally went over them without touching them even.
Great Video, Thank you
Looks good. Led the truck
I have this but only 2 light is working the other 2 is not. What do I do? Thanks
you can check your connections for power or individually test the lights
I’ve ran through numerous drill bits 1/8 and they either break or don’t drill through . What type of drill bit are you using to drill wholes for lights ?
Mine were MAC in the vid but on my second install on these I just ran the wire under the pinch weld on my Rebel
@@HammerdownMotorsportsUSA thnx for the info , I sharpened a mason 1/8 old drill bit and it drilled through like butter ! Btw your truck is beautiful!
how well do these do if you do some heavy offroading and plan to bang them up?
can't say i have done that but they are pretty durable
@@HammerdownMotorsportsUSA thanks for the quick response.
Any issues finding the place to plug the small 2 pin plug for the OBD? I have the new body style 2019 and the side dash panel does not remove like the older styles.
Thanks, very helpful, and detailed!
I’m at the drilling the holes stage and it’s been kicking my butt. Any tips on it?
Very thorough explanation.
Hi. Do your power running boards come down further/lower than the factory style chrome running boards? I have a 4" lift on my truck and the wife finds it too high getting in the truck now because she's short lol. Thanks.
Yes they do I have a 6 inch on my Rebel and getting in is easy with these steps a must have IMO
I want these for my 2019 ram but I don’t know about drilling into the truck for those lights tho
You can just run the wires under the pinch weld
Its a truck it aint gunna hurt😂
Nice running boards ..I want them on my ram rebel now...what do they go for
around 1500$
Is there a way to deploy them while the doors are closed so when your washing your truck you can clean them?
And Will they fit a 2022 rebel?
I installed mines but when I step on the driver side board it clicks , would up know why? I wish there was a way I can send you a video.
May have something loose? mine is quiet
Great vid, couldn’t help but notice you didn’t use the steps getting into your truck at the end of vid haha I guess just a habit of not having them
lol I noticed I did that too force of habit I guess
Excellent video. Thanks
where do you buy the sikka activator ??
TSE's auto accessories
Great video. When you installed the boards, did you have any type of lift or leveling kit installed?
Robert Mullins nope that is stock height
Awesome install and details.. thx!
Do you have any link for this.
I do not but you can check out amp research’s website
Excellent Video !
Any way to change the bulb color??
If you got a colored film to cover it that could work
Hey, I’ve been trying to find the exact model of Amp Research power running board for my 2019 Ram 3.6 V6 crew cab. Can you help?
Are you able to control them by the infotainment? I have the exact truck but not sure to go OEM or these. I want to be able to control them via the infotainment.
I didn't see anything in the infotainment I'd say that is something ill have to ask the dealer
Slick!
Was this the ( plug and play ) ?
Great video when u lock & unlock ur truck do the step light turn on ?
Great install. When are you gonna get a exhuast and possibly a cold air intake
I am in the works on some exhaust thanks for watching
@@HammerdownMotorsportsUSA your welcome keep up the great work and good luck with your garage.
Can the power running board install in tucson Hyundai 2019?
How much do these running boards go for? For that year ram?
I think around 1500
Put the LED's on the Camaro! When are you going to take the Camaro to the track?
Just installed these today and followed your video by any chance did you experience any problems with your screen display my AC won’t sync, no options given for door & lock settings, heated seats and wheel options gone and my backup camera icon disappeared after starting the truck up
no not at all I followed the instructions It came with I had no issues at all I'm sorry to hear yours is having issues
Hey there did it get fixed?
Will these amp steps for 1500 fit on a 2500?
That I would check the website but they should have a set of not
What made you chose amp research vs the oem retractable mopar steps?
Amp Research has a great track record and I was able to get them for a decent price and from what I've found the dealer gets back ordered pretty easily plus I like the lights
@@HammerdownMotorsportsUSA are the lights optional and can you choose the color of the leds, dont like much of the purplish color
Do they work with the controls on the touch screen to deploy and retract?
Michael Riley not that I can see
@@HammerdownMotorsportsUSA i have the factory ones, but the amp research look much better with the lighting! i don't think i have ever used the interface on the touch screen
Do you do installation for those ? I’m in pa as well
Does anyone know if the OEM’s have lights like the aftermarket ones?
The OEM ones don’t have the led lights
do you have a link for those steps?
www.amp-research.com/amp-research-75105-01a-powerstep For my 2008 F-150. Direct from AMP research Reno Nevada. 2 days to California. Use their make and model selection tool for other specific vehicles. I looked on Amazon, but didn’t find my vehicle. Same price as Amazon.
Love your videos on the ram I have the same truck, just wondering was there a reason you chose amp steps over factory steps? I notice I can get the OEM power steps for 1500$ and will work with the uconnect system vs amps 1800$ for crew cab and no connection to uconnect, does the amp steps come down lower or some other reason you chose those? Thanks and keep up the great videos
the amp steps i think do come down lower I got them through my buddy Todd and they were a better deal than stock so I went with the Amp steps, glad you like the vids thanks for watching
@@HammerdownMotorsportsUSA Can Todd give the viewers/subscribers a deal on these?
Andy Ramirez I guess not
Is this just the reg amp research not xl correct?
Yup regular
@@HammerdownMotorsportsUSA ok thanks any way i can send you a pic of my truck with 6" RC lift install?
@@1jz_supra_truck send it to my instagram live to see it
@@HammerdownMotorsportsUSA just did
Hey awesome video. Thinking about getting these for my Laramie sport. Just wondering though if they show up on your Uconnect screen? Like how the factory ones do where u can deploy them while inside the truck or do they just go down only when the doors open? Thanks! And love the channel
Yeah they do not show up in the screen like the factory ones that is all factory programmed these run independently with the plug in the obd2 port and deploy when the doors open
truck looks beautiful especially in black. but the recalls from chrysler scared me away to get a ford
Damn bro! Great video!
thanks for watching
Where do I buy these
any local accessory store or online
Awesome!
Great vid! Good explanation on the install. I recently bought the RAM 1500 2019 and these AMP powersteps are on my to-buy list. What model are the steps, 76240-01A?
Steven Olson thanks for watching I don’t have the model number handy it was in the box I no longer have
What makes it better than factory
would this side step fit on a ram 1500 crew cab 2020
yes this truck was a crew cab as well and 2020 should be the same
What model number are the Amp Steps you installed?
It has been quite a while I had Todd at TSE's order them for me so I didn't think to look
@@HammerdownMotorsportsUSA I appreciate your response. You made a great video. I just got a 2020 Ram 1500 and my local performance shop is having trouble finding Amp steps that for my truck. Anyway thanks again.
Sal Zepeda hmmm yeah they shouldn’t be too hard Lethal Garage did a similar vid to mine he may have remember to share the part number
Where are you located?
Pennsylvania
The real question is, can it hold someone fat like me? 😂 Looks great
It holds me so I'd say ready for anything lol
Where did you get that activator ?
Todd at TSE's auto accessories in Ephrata PA
Hey Steve, good job, great looking install. Just curious how long those steps are? Kind of looking for something to do a custom install on my 0ld 80's Jimmy to help compensate for tires and lift, but obviously need to have them a little shorter than for a 4 door ram. Thanks!
I would call Amp research directly and see what kit would be closest to your needs I believe the end caps can be removed and then you can shorten the board if need be, Thanks for watching
Where can I buy this steps for the best price please let me know thank you
I got mine from Todd at TSE’s auto accessories in Ephrata PA
Thank you for replying back with that info sir
Can you change the LEDs in the lighting? I don’t like the Blueish color
Seth Harvey nope it is how they come they are a pretty nice white light in person
🇺🇸😎Hey Buddy👍 awesome job looking good 🔥✌️
I thought this was a video on how to install the power steps?
Jerry Polete is that not what we did?
😁👍😎
thou need em lol
I have them on my Silverado .... theyre bad a$$
*
Can you please help me out something like this so my 80 year old mom can get into my 96 Ford Explorer much easier? I'm on a fixed income and I really need this for my mom. Please help.
Who needs a torque wrench 😂