Street tuning Ignition Timing with crome would be awesome. Seeing how much timing +/- effects the engine. Thanks for the videos dude you really rock!!!
i understood the basics of how tuning works but this video was so helpful with learning how to read input from guages at different rpm and where to adjust. thank you much m8
This video helped me tremendously in street tuning my all motor high comp d16. It was street tuned by a tuner but the afr's were rich all over. After watching your videos, downloaded HTS, got an ostrich, took some fuel out and it runs stronger than ever. Not to mention the previous 18mpg
Honda Tuning Suite mega.nz/#!nG4nDKQB!eRuuare034DCwcX52kiIpCN5nQdLbTnr_2EKpxNwi7c m.facebook.com/groups/2030595640557116?view=permalink&id=2403253393291337
Hi there. Watching from India. Watching all the videos till end. Dont find boring. I have searched for many videos to learn some tuning. Your small tips in each video will add up and actually can help fully tune a Honda. I run d16y turbo with p28 and neptune.
Awesome video, made a lot of sense to me! Running chipped P06 on a D15B2 w/K04 from a junked mazdaspeed3. Helped me set up a basemap and ease into a street tune before dyno tuning with a professional.
Interpolate and smooth function is so similar to my video editing programs, you change the characteristics of key frames just like your working easing the fuel tables. Got a feeling I could figure this shit out.. my F setup has no obd1 ecm variant and the one I'm running has no vtec so my solenoid started leaking lol need to source a p28. Please keep making this type of content. Just watched the entire vid buddy. These motors are like swiss watches
Whap whap vtec bro 😂 edit: to answer your question..just be yourself. People connect with others because they are who they are. Thanks for droppin' some knowledge man.
How much does chrome cost and after tunning efi can u take off the white chrome trip off the ecu. Im trying to learn how to tune but start with a tuner that's not so expensive.
I'm new subscriber and this is just friendly advice for You to put intro to end of video make it like outro if You want to keep it, because it started to annoy for every video to skip ~20s. Other than that cool, watch till end.Keep up.
Liked the video, very informative. Car sounds like it is running great. Question: What do you think this car would run in the quarter mile, based on your experience?
Yeah not to hassle ya on the camera but some vids im squinting to see. Like the fuel table (Chrome in general) and the vid with you trying to show how to use the spring and retainer tool. Fyi tho i watch till the end. Just recently found your channel but im only into honda. Preferably like boosted d16s. But good funny content.Its fine the way it is. Very informative and detailed based on experience. Keep it up
So what if you already have a check engine light on, I’m pretty sure mine is on for the o2 sensor, so is there another way to know if the tune is loaded properly or a way to clear the cel?
whats up man! I have an h23a vtec from hmotors in my 97 prelude 5 speed. I've got a chipped p28 ECU h22 base map. My car has been running fine on the stock p5m h22a4 ECU obd2 computer. Skunk 2 catback system Megan headers Walker Catalytic Converter AEM Short Ram. However I wanted to take a " peak" into the p28 ECU and see how safe its current maps are. So... i decided to try to install crome pro from xenocron. Its on my desktop at the moment. I also do have a laptop. Is there a way to connect the p28 ECU W/O the car? Like take the ECU up stairs in my desktop room and just connect it almost like a phone, modify it, burn, save, then plug into the car? Or all must be done "in the car"? Do you have links you can provide for cheaper ways for the connectors? At moates the BURN2 chip programmer is like 85.00$ Other than the CRome program, I dont have anything else at the moment.... Windows 10. Thank you!!!
Tuning is not discussed much by people and when people do it’s not on a specific car or very specific information it is usually a broad and boring vid that people barley can understand your doing good on the content I’m about to start vids on my channel with my crx b20 @crazyasiancocasian like to day I think
Its so funny that you happened to make this video today because ive been wrestling with the lean till it warms up shit on the C10 then last night i realized I had zeroed out all my OLFA tables for some reason.....then i get on here and youre doing the same shit on the crx. Just thought it was a funny coincidence. 😅 Oh and I dont enjoy the whole video and obviously didnt watch till the end.😜
You and young static are the best honda guys on youtube right now. Fantastic vids man!
Street tuning Ignition Timing with crome would be awesome. Seeing how much timing +/- effects the engine. Thanks for the videos dude you really rock!!!
Can you teach me how to tune
i miss my crx.. and i like b20v setups even more then ever. i always stay till the end bud, your tuning knowledge never bores me. good job on the rex
Your terminology is brilliant, explanation of tapering off fuel for high rpms was quite nice.. your great at breaking things down. Subscribed
i understood the basics of how tuning works but this video was so helpful with learning how to read input from guages at different rpm and where to adjust. thank you much m8
This video helped me tremendously in street tuning my all motor high comp d16. It was street tuned by a tuner but the afr's were rich all over. After watching your videos, downloaded HTS, got an ostrich, took some fuel out and it runs stronger than ever. Not to mention the previous 18mpg
Honda Tuning Suite mega.nz/#!nG4nDKQB!eRuuare034DCwcX52kiIpCN5nQdLbTnr_2EKpxNwi7c
m.facebook.com/groups/2030595640557116?view=permalink&id=2403253393291337
Best informative step by step tuning video on RUclips! The show is underrated! Needs more subs! Keep it up Hunter!
Have to say its not first video i watched of yours but this video is reason im pullin up my chair and adding my self to the list of followers
You got it homie very informational. Watched the whole video. Thanks for the walk through.
Great video man! It was great to see your incremental changes to the map and tune.
Hi there. Watching from India. Watching all the videos till end. Dont find boring. I have searched for many videos to learn some tuning. Your small tips in each video will add up and actually can help fully tune a Honda. I run d16y turbo with p28 and neptune.
That’s awesome! Glad to help!
This was very helpful and showed some good tips will be tuning my car this weekend if my emanulator shows up in time
I always watch to the end! Your my go to guy for Honda turbo.
Awesome video, made a lot of sense to me! Running chipped P06 on a D15B2 w/K04 from a junked mazdaspeed3. Helped me set up a basemap and ease into a street tune before dyno tuning with a professional.
I'm not bored with it love all that knowledge!!!
I was just looking at videos on tuning with crome lol! I got your sticker in the mail btw it looks sick. Gonna have to buy some more
First good Crome tuning video on RUclips. Good video too my man. Crx rips!
Great content. I watched it a few times already, Start to finish.
Interpolate and smooth function is so similar to my video editing programs, you change the characteristics of key frames just like your working easing the fuel tables. Got a feeling I could figure this shit out.. my F setup has no obd1 ecm variant and the one I'm running has no vtec so my solenoid started leaking lol need to source a p28. Please keep making this type of content. Just watched the entire vid buddy. These motors are like swiss watches
I learned to tune with this video. Thanks Hunter
Video Very Informative don't worry about Being Funny keep Throwing These Chrome Tune videos out there.. Good job
Sed it once n ill say it again thanx for the crome help! Keep it up
great job. will be using your tutorials to tune my crx turbo ls/vtec soon!! BOOM
enjoyed the whole thing, very informative. functional knowledge very helpful.
Great vid, watched the whole episode keep it up! Would like to see the gsr eg build/tune soon
I watched till the end dude. nice 😎
I watch tell the end man and great content
Love the videos especially the tunning how to's incredible
Subtitles for CRX bwaaahhhh
[Applause]
[Music]
Go look for yourself 😂🤙
Sick video mate learnt heaps keep up the good work
Great video learn a lot I would love to see this video with your hatch and smanager and I watched the whole video and I really enjoyed it
this helped me so much thank you bro !
Whap whap vtec bro 😂 edit: to answer your question..just be yourself. People connect with others because they are who they are. Thanks for droppin' some knowledge man.
The whole video was epic
I'm a new subscriber, but till now enjoying your videos.. I liked this tuning 101. Do you adjust timing map also?
Yes
I’m gonna be installing a chip in a p30 ecu, and hook it up to chrome. Tuning a gsr with pr3 pistons lol, wanna get an intake and eventually cams...
How much does chrome cost and after tunning efi can u take off the white chrome trip off the ecu. Im trying to learn how to tune but start with a tuner that's not so expensive.
Hunter You should make a side channel for tuning
Could you zoom into the laptop a little bit please? I can't see the numbers in the tables. Are you running Chrome Pro?
I'm new subscriber and this is just friendly advice for You to put intro to end of video make it like outro if You want to keep it, because it started to annoy for every video to skip ~20s. Other than that cool, watch till end.Keep up.
Edvinas J. It’s not in every video
Liked the video, very informative. Car sounds like it is running great. Question: What do you think this car would run in the quarter mile, based on your experience?
sanger440 probabaly low 13’s high 12’s in its current state
Closer up pic of the monitor screen would be awesome thanks for vids 👍
trying haha
Yeah not to hassle ya on the camera but some vids im squinting to see. Like the fuel table (Chrome in general) and the vid with you trying to show how to use the spring and retainer tool. Fyi tho i watch till the end. Just recently found your channel but im only into honda. Preferably like boosted d16s. But good funny content.Its fine the way it is. Very informative and detailed based on experience. Keep it up
Cecily Fields I’m trying and working with what I got and my budget
beautiful
Budget Honda building/tuning looks interesting. Is there any budget Honda guru/website guide, along the lines of Denmah and his LS SloppyWiki?
you can check out xenocron.com they sell parts and have some how to guides. Otherwise jeff evans does some how to's as well I believe.
Where do you put your wideband? Reading off all four, just 1, 1 & 2?
to record everything on the ecu, just write on the laptop and then disconnect it and put the chip in it?
Wait.... Weren't the pistons supposed to fall out or something?
Right. Mind blown
So what if you already have a check engine light on, I’m pretty sure mine is on for the o2 sensor, so is there another way to know if the tune is loaded properly or a way to clear the cel?
whats up man! I have an h23a vtec from hmotors in my 97 prelude 5 speed. I've got a chipped p28 ECU h22 base map. My car has been running fine on the stock p5m h22a4 ECU obd2 computer.
Skunk 2 catback system
Megan headers
Walker Catalytic Converter
AEM Short Ram.
However I wanted to take a " peak" into the p28 ECU and see how safe its current maps are.
So... i decided to try to install crome pro from xenocron. Its on my desktop at the moment.
I also do have a laptop.
Is there a way to connect the p28 ECU W/O the car? Like take the ECU up stairs in my desktop room and just connect it almost like a phone, modify it, burn, save, then plug into the car?
Or all must be done "in the car"?
Do you have links you can provide for cheaper ways for the connectors?
At moates the BURN2 chip programmer is like 85.00$
Other than the CRome program, I dont have anything else at the moment....
Windows 10.
Thank you!!!
Is there a way to shoot flames in launch control and in the rev limiter with crome? I run a turbo honda btw
How are you writing to rom on the fly ?
H8RICE, when you gonna put the 5.3 back together? Hows that ON3 turbo holding up?
They always hold up great. it is back together im waiting on my trans
Show us some timing maybe e85 setup for NA
next video gives a small breakdown on timing.
what motor are you tuning here?
Tuning is not discussed much by people and when people do it’s not on a specific car or very specific information it is usually a broad and boring vid that people barley can understand your doing good on the content I’m about to start vids on my channel with my crx b20 @crazyasiancocasian like to day I think
Is there a place i can email you for help on chrome tuning
Does chrome tell you the air to fuel ratio?
Matteo Wise not without a wideband
Its so funny that you happened to make this video today because ive been wrestling with the lean till it warms up shit on the C10 then last night i realized I had zeroed out all my OLFA tables for some reason.....then i get on here and youre doing the same shit on the crx. Just thought it was a funny coincidence. 😅 Oh and I dont enjoy the whole video and obviously didnt watch till the end.😜
LMAO that is funny!
Whole thing thru
BWAAAAAAH
LOL