Looked up that kit. Very reasonable price. I basically bought the same "kit" from snap-on back in the day. Still have every tool. But of course I repair gas powered things as a career so it was a must have. Sadly it was like 60k back then.
Yea funny story me and my cousin opened a speed shop in 2009 with only my Craftsman tool set and he bought all snap on and matco and I still have had less broken tools and had mine 10 years longer than him still lifetime warranty if something does happen so best investment I ever made and still his worst he says haha wishes he saved 20-25k and stayed away from paying for a name the impacts piss him off Alot too our Milwaukee stuff is way better than our snap on impacts but to each his own whatever .makes you happy or you think is necessary is all that matters
@@freedomfox8183 i never knew husky to be a super reliable brand but ive got a 14 year old husky impact, the torque is a little low but its still going strong
I would recommend when you put the new primary injectors into the 4 rotor you develop a torque spec, it’s a very tender area. Figure out what torque spec on that 3/8 drive torque wrench properly crush’s the O-Rings
Every tool imaginable. Does it come with the tool in the center of the thumbnail? You need to make a full size poster of that and posterbomb a friends place with it.
Did that come across as "lovingly hum ok not that much ahh likingly" sarcastic as intended or WOW that guy is an asshole thereby legitimzing my "15 years revoked certified preF^@ked (marriage cert)" ex wifes rants??
That 3/4" torque wrench..... Should you ever break the internals out of warranty, will make an excellent purpose driven cheater bar...... Ask me how I know
i started off not knowing this existed, i ended with wanting it as im really picky about my sorting of tools, and the drawer inserts are always so limiting
@@jeffreynigg6122 the kits 10k but regardless its quite normal considering the size of it and the amount of tools, granted if i grabed tools from manufacturers i know id get the best tools from id spend 10x that amount for the same amount of tools, so still, also i can't buy it regardless due to being outside the us, but i can 3d print so i can do the same thing that way
So awesome!!! Love the new toys! My ocd is happy with the tool trays maybe not with the order grouping the way you have but so very nice. Happy for y'all.
The whole teng set is 9k + tax and shipping and the snap on master set with box is 12-14k or 8k with student discount plus lifetime warranty and much better quality so pick ur poison
The biggest handheld torque wrench I have ever seen was 1100ftlbs. Was used at a shipyard. We called it Excalibur. It was over 4 feet long before putting the extension on it. Beyond that, we used hydraulic torque rigs.
@@TommyG_0311 I wish I knew how old it was. We had some snap on torque wrenches from the 1940s. The shipyard has been around since the early 1900s, and we still had a handful of old tools dating all the way back. Most were kept only for display, but some were still in regular use. If I had to guess, I'd say Excalibur was likely a 40s or 50s era tool based on the design. We also had sockets up to 6" that ran on a 2.5" drive air impact, Allen wrenches up to 2"...tons of cool stuff.
I check out their website and that tool box is a good deal. Too bad i don't work on cars any more. Those tools should make Robs projects more fun to work on.
I have tengs tools box for about a year now, its great tool for the price your paying but there warranty sucks. They will literally tell you that you don’t know how to use your tools so you don’t get warranty. One of my problem was the tray starter disentigrating plastic was very brittle on two trays and broke and they told me it was my fault, second was a channellock rubber grip glue came of and they told me the same I was using my tools wrong and it look new. Except warranty it a good tool box
It's extremely important to know how hard your going on your nuts! Buying new tools and toolboxes always makes for a great day! Well except for the wallet.
Uhh....guess the snap-on deal didn't last very long lol. Guess they didn't like your comments section lighting them up for being worse than any other power tools lol
Separate sae from mm left and right sides of the boxes and put the tool stickers on magnets so if you move that set to a different spot you can grab that sticker on the magnet and move it as well
I have some Teng tools and would chose them over quite a few other brands the quality is there they don't break they take abuse if needed and keep on working.
Handles face right unless youre left handed. easier to pull out and it looks like they'd be closer to the front of the drawer so you dont have to mess with pulling the drawer to full extention before you can take it out.
My thoughts and actions lately! Ive been getting some great tools for great prices from big name brands, just gotta catch the sales. This box is goals tho 😍
You don't know it yet but you don't have enough vice grips. I wish I had a shot of my dad's collection. It would blow your mind lol. Crazy thing is we've had basically all of them used at once! 👍
That's awful nice looking, pretty sad that the 99% of us wont ever be able to enjoy anything more than this video. Congrats to you. Looks fun and seems to bring happiness.
A bit more green, and this would fit into christmas a 100% :D But yeah, unboxing and the "where should I put it?" is a real pain, glad you've rocked it
I AGREE!!! with the 360 degree castors. I absolutely don't understand the two and two arrangements, and have had to fix it on several of my tools and chests. Argh.
I can see me and a mate have 1 more step to be like you guys both cabinets and tools wise haha we only have the bottom rolling cabinet and that is in the race car trailer.
not going to lie, i was supplied a teng tools toolbox when i commenced my apprenticeship here in Adelaide Australia by the motor trade association, didn't even last a year was completely shit for a heavy diesel mechanic for use in a industrial sense second year in was all replaced and moved on or broken... also at the complete cost of my tools for the trade government package, i wasn't allowed to refuse the box... what a waste of my government package for sub par quality tools to use day in day out...
I feel like they have had better offer from different tool companies. I'm sure they will do the job just not something I could see someone who does this for any sort of living using.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
PUT the stickers on kitchen magnets, that way you can move them whenever you change drawer content.
Succhhaa good idea tho🤌🏽
That is an awesome idea!
You are quite possibly the smartest man on earth
Big brain
🤯
This video gave me NEARLY the same pleasure as watching my grandkids open their Christmas presents!!
So cute and adorable!!
@@hisesihakura673 shut up
I agree that would be the perfect present to watch kids unbox but all they want is electrical gadgets and games machines at stupid prices.
This could’ve been a 2hr video and I would’ve watched all of it. Proud of you daddy Dahm I’ve been here since blue wall garage days
I’m a lil sad it wasnt
Looked up that kit. Very reasonable price. I basically bought the same "kit" from snap-on back in the day. Still have every tool. But of course I repair gas powered things as a career so it was a must have. Sadly it was like 60k back then.
Yea funny story me and my cousin opened a speed shop in 2009 with only my Craftsman tool set and he bought all snap on and matco and I still have had less broken tools and had mine 10 years longer than him still lifetime warranty if something does happen so best investment I ever made and still his worst he says haha wishes he saved 20-25k and stayed away from paying for a name the impacts piss him off Alot too our Milwaukee stuff is way better than our snap on impacts but to each his own whatever .makes you happy or you think is necessary is all that matters
@@freedomfox8183 i never knew husky to be a super reliable brand but ive got a 14 year old husky impact, the torque is a little low but its still going strong
Aviation is snap because of all the tight tolerances needed, other brands are simply way too thick to fit in tight places
@@paymya6130 oh so that’s why they feel they can charge $400 for a basic dead blow
@@hisesihakura673 peace on earth or leave it
Wow, so much red madness 😍 😍 😂
It's WAY easier to move heavy stuff when only 2 wheels caster. Try moving it across any slope with 4 casters by yourself.
I would recommend when you put the new primary injectors into the 4 rotor you develop a torque spec, it’s a very tender area. Figure out what torque spec on that 3/8 drive torque wrench properly crush’s the O-Rings
Funny watching the two of them opening each drawer after everything is laid out. One is very careful, the other not so much.
19:28
I like this channel. It's like the grown up version of the group of underdog kids who are trying to build a soap box racer to win a big contest.
Every tool imaginable. Does it come with the tool in the center of the thumbnail?
You need to make a full size poster of that and posterbomb a friends place with it.
I think his tool is probably the biggest tool he owns
Ooooohhhh shittttt🤣
Did that come across as "lovingly hum ok not that much ahh likingly" sarcastic as intended or WOW that guy is an asshole thereby legitimzing my "15 years revoked certified preF^@ked (marriage cert)" ex wifes rants??
This would be like Christmas Day and my Birthday all rolled into one, I would be as giddy as my 3 year old granddaughter 🤩🤩🤩❤️🔥❤️🔥
That 3/4" torque wrench..... Should you ever break the internals out of warranty, will make an excellent purpose driven cheater bar...... Ask me how I know
Also makes a excellent hammer.
@@venge1894 I can vouch for that
Watching you open each and every drawer loaded with brand new tools was very satisfying
i wish i could be apart of something like this. keep it up Rob it's motivating to see a genuine person make it in the world
Pretty sure you are apart of something like this.
Wow!
Okay, Teng Tools. I need to go check them out. Thanks!
Rob goes proper with "that's excellent!" 14:37
i started off not knowing this existed, i ended with wanting it as im really picky about my sorting of tools, and the drawer inserts are always so limiting
untill you look up the price. 13k for that piece of kit. Not saying it's not worth it because it's extremely good quality.
@@jeffreynigg6122 the kits 10k but regardless its quite normal considering the size of it and the amount of tools, granted if i grabed tools from manufacturers i know id get the best tools from id spend 10x that amount for the same amount of tools, so still, also i can't buy it regardless due to being outside the us, but i can 3d print so i can do the same thing that way
I'd put all the SAE in a it's own drawer. I did in my new box. I rarely open that drawer.
That drawer is there to collect dust.
i have a drawer where my imperials are never touched. never needed to use them on any car.
I had to break out thr 5/8 recently because I needed 2 16mm when doing suspension work.
It’s funny that most of the hardware on my family’s cars are all metric even though they are all Ford with the exception of my Ram
My wife has a Chrysler and I have two old German cars. I occasionally need a 1/2 or 3/8 for lag bolts or something around the house.
Love hand tools, and this isn’t the first RUclipsr using them. Idk if it’s good or not but as far as one can see looks like a pretty legit kit
So awesome!!! Love the new toys! My ocd is happy with the tool trays maybe not with the order grouping the way you have but so very nice. Happy for y'all.
That whole thing costs as much as a similar sized toolbox from snapon…. Just the toolbox mind you, no tools. Color me impressed.
yeap. I honesltly think Tend tools are good quality tools, but even if they weren't... This price gap just can't be justified
@@LuanCristianThums they are quite good, use alot on my everyday work, its quality
The whole teng set is 9k + tax and shipping and the snap on master set with box is 12-14k or 8k with student discount plus lifetime warranty and much better quality so pick ur poison
@@naiire_ hold on did you say snap on is better quality?
That torque wrench is needed for school bus lug nuts. 600 ft lbs
The biggest handheld torque wrench I have ever seen was 1100ftlbs. Was used at a shipyard. We called it Excalibur. It was over 4 feet long before putting the extension on it.
Beyond that, we used hydraulic torque rigs.
@@pipisugbo Excalibur lmao
@@TommyG_0311 I wish I knew how old it was. We had some snap on torque wrenches from the 1940s. The shipyard has been around since the early 1900s, and we still had a handful of old tools dating all the way back. Most were kept only for display, but some were still in regular use.
If I had to guess, I'd say Excalibur was likely a 40s or 50s era tool based on the design.
We also had sockets up to 6" that ran on a 2.5" drive air impact, Allen wrenches up to 2"...tons of cool stuff.
@@pipisugbo I'm an old tool geek that sounds really cool!
I use a 1000 ftlbs torque wrench on 789 cat truck front suspension head bolts
That’s a nice tool kit. Everyone needs one in their garage.
Rob opening the drawer softly and Isaiah slams them open 🤣
gotta warranty test those draws. nah jks aside those mfs are built to last
I was saying that!!! 😭😂
i loved the thumbnail & the first 20 seconds was amazing. it's like watching kids open Christmas presents!!
I check out their website and that tool box is a good deal. Too bad i don't work on cars any more.
Those tools should make Robs projects more fun to work on.
I have tengs tools box for about a year now, its great tool for the price your paying but there warranty sucks. They will literally tell you that you don’t know how to use your tools so you don’t get warranty. One of my problem was the tray starter disentigrating plastic was very brittle on two trays and broke and they told me it was my fault, second was a channellock rubber grip glue came of and they told me the same I was using my tools wrong and it look new. Except warranty it a good tool box
its not the warranty its tools ..since tool broke you wanted to replace with their lifetime warranty... shitty tools comes with shitty warranty)))
It's extremely important to know how hard your going on your nuts!
Buying new tools and toolboxes always makes for a great day! Well except for the wallet.
Congrats Rob!!!! That was like unboxing the Teng's meself!!! You will get so much mileage out of them...
I like the adjustable wrenches in the ‘material removing’ drawer
You mean the swedish nut lathe?
Oh yes all the tools!! I’m getting parts in for my 13b swap in my 240sx and I’m psyched
Uhh....guess the snap-on deal didn't last very long lol. Guess they didn't like your comments section lighting them up for being worse than any other power tools lol
I mean we arent wrong i broke a snap on wrench via taking off a carburetor on a go kart lol
Teng has hands down the best all in one kits out of any brand imo
When u starting back doing videos on the 4 rotor??
That will be the superb things to own in one's garage. Hope we all will get that someday
Isaiah: "you can't feel how heavy this is"
Me who used to work on cars for a living: "Sure I can"
Separate sae from mm left and right sides of the boxes and put the tool stickers on magnets so if you move that set to a different spot you can grab that sticker on the magnet and move it as well
Well god dam congrats uncle Rob!! This Puts my $2,500 box setup to absolute shame.
I think that might be one of the best intros yet!!!
Christmas came early. So did Rob. and Isaiah. and everyone else in the shop. and outside of the shop.
tengtools is good stuff, use it alot at work, much impact gun work, nothing breaks
I love tennis tools wish I had more well used and no tool broke only the blow plastic tool shorting area in the plastic tool keeper
I have some Teng tools and would chose them over quite a few other brands the quality is there they don't break they take abuse if needed and keep on working.
@13:11, Aren't those drawer stickers? So you know what's inside without opening them all?
this looks like the dream of every 5 year old boy... u brought back memories of mine when i was young
I'm so happy I subscribed all those years ago. This is like Christmas for me c:
WAZz up. Early Xmas gifts. Pretty damn dank
Would love to see you buy American made.
Handles face right unless youre left handed. easier to pull out and it looks like they'd be closer to the front of the drawer so you dont have to mess with pulling the drawer to full extention before you can take it out.
Very nice but, does it have the socket required to remove the exhaust sensor from a Holden turbo craptiva without taking off the turbo or manifold? 🤔
I feel like i am watching a dream before someone wakes up haha! Sick set of tools!
I couldn’t be more jealous of that tool box if I tried!!
How long before Rob has his own Dyno?
You know it's coming.
How long until he hires the Vargas brothers and creates the greatest rotary build shop in the world?
@@JnixMarshel the vargas brothers have a completely different style than rob, don't think that would work out too well 😅
lost count at how many times i came during this vid. Gotta go back and pause on that 10mm deep impact socket 🤤 been wanting those for a looong time
TOTALLY!!!! get the excitement guys...wooowwwww teng tools are just awsome 😊😊😆😆😀😀
With HF starting to raise their prices.... Brands like Teng and Nieko are starting to catch my eye.
My thoughts and actions lately! Ive been getting some great tools for great prices from big name brands, just gotta catch the sales. This box is goals tho 😍
HF warranty is second to none though. Walk in with a tool and get a replacement.
Rob's tool game strong
Awesome setup and amazing set where is your promo code so I can use it?
You don't know it yet but you don't have enough vice grips. I wish I had a shot of my dad's collection. It would blow your mind lol. Crazy thing is we've had basically all of them used at once! 👍
Now all the Shop needs is a Plastic/Carbon and a Metal 3D Printer (that's two) for those Custom "One of a Kind" parts!
That torque wrench is what they use to torque the lugs for a Tractor-Trailer (Semi-Truck)
That's awful nice looking, pretty sad that the 99% of us wont ever be able to enjoy anything more than this video.
Congrats to you. Looks fun and seems to bring happiness.
8250 is extremely reasonable for that. Many many many people can enjoy this.
@@Belknap307 I. Hear ya. I'll just keep breaking cheap , low qualities like the rest of us
@@Belknap307 wow thats stupid cheap for how much that comes with it
early Christmas present for Rob
You just sold your Sole!
j/k an amazing tool set. Hope it doesn't require additional endorsements!
after a yr how satisfied are with teng tools ? I am looking at this kit just curious how good are the tools.
Honestly that is a reasonable price for that kit.
Everyone loves new tool day
Congratulations 🎉🎉🎉 New Tools !!
How much time do you think it is gonna take you to lose 20% of those tools?
Bet they already did in this video
Where is my hat, Rob!?!
I love your videos, btw. I bought an 82 FB GSL, and I love it
You got yourself a nice set of iron to work with there! Very cool!
You’re living the dream dahm
My T handles are teng tools and they are pretty decent quality and strong
ROB!!!!! You’re almost at 1mil subscribers!!!!!!!
Ole Daddy Dahm Baby...!
A bit more green, and this would fit into christmas a 100% :D
But yeah, unboxing and the "where should I put it?" is a real pain, glad you've rocked it
With the biggest tool on top!
How much was all that?
$8,250.00
I AGREE!!! with the 360 degree castors. I absolutely don't understand the two and two arrangements, and have had to fix it on several of my tools and chests. Argh.
Unboxing kids. A fun adventure for the whole family on Christmas... 🤪😁😁😁
Tried buying that torque wrench off amazon for my school bus lug nuts. Listed at $200 but when I tried to check out it came up as $750 😳
Aren't the stickers to put on the outside of the drawers so you can tell where stuff is? 🤔
I can see me and a mate have 1 more step to be like you guys both cabinets and tools wise haha we only have the bottom rolling cabinet and that is in the race car trailer.
Almost at 1m subs man!! Keep it up 👍
I remember having an eary Christmas once.
Does teng do sets for class 7 and 8 truck mechanics?
Damn dahm!! I got 2 shipping containers with 3 full shop sets of snap on tools I could have hooked you up with!
@8:44 something about this right rear wheel is not right
Teng Tools Customer Service: Hello, how can I help you?
Rob: YES
Teng Tools Customer Service: ok, I’ll get that order processed for you!
not going to lie, i was supplied a teng tools toolbox when i commenced my apprenticeship here in Adelaide Australia by the motor trade association, didn't even last a year was completely shit for a heavy diesel mechanic for use in a industrial sense second year in was all replaced and moved on or broken... also at the complete cost of my tools for the trade government package, i wasn't allowed to refuse the box... what a waste of my government package for sub par quality tools to use day in day out...
What is the end-user price for everything on the pallet?
17:12 Wrench👍
I wonder if there’s anything out there torqued to 1 ft pnd
Nice choice in overlay music.
Tools galore. I need a tool sponsorship like this
Not my favorite content, but man I'm excited for all the things that these new tools will bring to channel
Looks like a real nice kit!
Isaiah has the best no expression words
Yoooo, toys for the the big boys! I like that.
I feel like they have had better offer from different tool companies. I'm sure they will do the job just not something I could see someone who does this for any sort of living using.
X2