The general rule of thumb for cobra knotting is for each strand, about one foot of cord for each inch of finished knotting. So you'd need about 30 feet per strand.
I made this bracelet once. I had struggled to follow this routine because it is way too quick with visual. Seems like the person knows what they are doing and only one cycle is visually explanatory. Would have been really nice if this instruction was done in a slower pace and more step by step at least for few passes and then the instructor could have whipped through the rest. Just my thoughts as i am just learning to braid and this could have been a great video with the exception of that part.
@angel cocio - We sell the supplies to make this bracelet. The links for the supplies in this video are located in the video description underneath this video.
You can cross either one on top, and yes, it will reverse what that looks like when you change it. You can choose whichever one to go on top, but it does look neater when you keep it consistent.
Our videos are made to teach you techniques and inspire you to create :) All of the supplies for you to make your own Wide (Double) Cobra Paracord Bracelet can be found in the video description.
I enjoyed this video very much. This being my first time watching any BEADAHOLIQUE video, I admit, having seen other tutorials covering the simpler fundamentals did make following your hand-work (& spoken directions) easier to absorb the work as it unfolds. If I didn't completely grasp it the first time, a second run through it cleared me up on the points that may have felt a bit rushed through. Hey! Keep it up. you have a true natural ability to Show, Share & Teach with your hands as well as your vocal persona. You have a gift, develop your gift. ... Thank You for Sharing : )
Simple, helpful rule: Black working strand always goes over the base strand, and the gray working strand always goes under the base working strand. It took me a while to understand what you were doing, until I figured out this simple rule. I didn't have to strain my brain to see how you were "mirroring" the cobra knots.
Thank you so much, this was very helpful, I made a collar for my friends dog using this technique and it holds, sits and fits so much better the a single cobra.
You can get Paracord on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Parachute cord (paracord) is a durable, multi-purpose nylon rope with practical and artistic applications. You can get the supplies featured in our videos on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
You can get the supplies featured in our videos on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
The video was helpful for those who already know the basic Cobra weave. I did find that the constant movement of the bracelet to be some what distracting (a jig would have helped), thus making it hard to see what you were doing, especially for beginners! Although I get that maybe beginners should start with something simpler! Also at the end, I think you would have much better results with burning the ends with a torch style lighter, rather than the Bic. Or maybe tucking them for a more finished look. All in all a great video! Thank you so much!
when you melt the ends, use a metal something like pliers or scissors to press cos its cold & won't stick like plastic. TY for sharing your work! Neat idea!
They are called Xuron Sharp Flush Cutter Pliers. You can get them on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
thank you for posting this i have been trying to figure out how to make this and your video was most helpful and i will be sure to pass your name around. thanks again!
thank you for the instruction. However, as you knot...I found that the instruction stopped and it was hard to see what cord went over or under what. Fingers in the way. But I slept on it and found this morning by replaying the first few minutes and repeating I am now knotting the cord correctly and it is beautiful!!! I am making an extra wide dog Martingale collar and it looks fabulous! Thank you again for your time but other viewers if you are a beginner like me just keep replaying the first 4 knots and you will be on your way! Some go over then under then after the cross over cords that pattern switches--pay attention!
I apologize...with some work I figured out the weaving, however at 16 minutes it gets completely confusing. I think people here agree that it is an awesome bracelet. But your hands are in the way and your explanation glances on just talking to yourself rather than teaching. You are watching your hands go through the motions that you already know, but not telling the audience what you are doing exactly. The bracelet looks great but I am going to have to experiment to finish it. Thanks for sharing
a jig may not be necessary, however a jig and a pair of "fids" or lacing needles help the process immeasurably, and you can make both for well under $10. With these tools it is possible to make projects without burning the ends and make a much cleaner peice
all id suggest is to use the metal part of your lighter to flatten the fuses, the plastic wont stick to metal, it shicks it, iv gotten great clear smooth fuses doing this. great vid
@tuan dan Nguyen - We used paracord to make this bracelet. You can find it here: www.beadaholique.com/t-ba-project-B1068.aspx?RUclips& You can get the supplies featured in our videos on Beadaholique.com's website. The links for the supplies in this video are located in the video description underneath this video.
It can be pretty stiff, yes, but that will vary based on how tight you pull your knots. I would suggest experimenting a little bit with a smaller piece first to see if it will work for your project.
After hours of trying to get this right I finally worked out that the black (or the single colour) cord NEVER passes over the top of the second string. it always goes behind it. That will make it easier to keep track of your sequences.
Yes, these buckles are generally listed by the size of the opening. The product description should give you complete measurements for the opening and the entire buckle.
Thank you for this very helpful video. I made a 16 inch dog collar and it turned out great due to your very detailed instructions. I have a jig for smaller, regular bracelets but it wouldn't work for this larger project. So, after I had about three inches done, I used a c-clamp to clamped the collar to the work bench. The work went a lot faster after that.
Nice work! I ended up using this video to make my first gun sling. Thank you. I think you are the easiest to follow out of all the vids I watched on this subject! If I could offer you some friendly advise after watching others and that is to get one of those torch lighters, they work a lot better by throwing out a straight flame. FYI
If you wanted the X on the top, you could just attach the cords like I show here and then flip it over to do the knotting. Then flip it back over to finish the other buckle.
I experienced the same difficulty fusing lengths of the paracord together so I took a needle and thread and stitched them instead. End product is fine.
Hey Beadaholique, try using a butane lighter to burn the ends, when your finished with your projects. The butane lighters work so much better than the Bic lighters, (at least that's what I've noticed & seen), & will give direct melting to the ends of the paracord, unlike the Bic lighters, which seem to burn everything else around the ends too. Plus, the butane lighter's side, will give it a nice smooth finish, when burning the ends off. Since I've started using a flip-open top butane lighter, my projects have seem to go a lot smoother, & I'm not turning the ends and everything else around them black & ugly. Never again will I use a Bic lighter on Paracord lol. TRY IT & GOOD LUCK!!! ;) Sincerely, HeatherMarie
You can definitely experiment with other types of cords to see how it works. I haven't tried adding beads to this technique, but again, feel free to experiment and see what you get.
Hi cool video and good bracelet job too. Have tryied using a small heated rod to get the paracord end finished in place o the BIC lighter? I believe it can help you get a nice finish without flame heating the sorroundings of the bracelet. Keep up sharing your works please. Bye.
Nice video, thanks. One thing that struck me was that the second buckle attachment having only two strands looks odd. I wonder if it would look better if each attachment strand was wrapped around the buckle bar a couple of times before feeding it back to be braided over. That way it would look more like the other end. Guess I'll try it and see :^)
"Paracord" is short for "Parachute Cord." It can be found in military stores, hiking stores, survival stores, etc. "Paracord" is a cord that is very very strong and is made up of multiple strands. It is also called "550 Cord," because it holds a minimum of 550 pounds per length. You can also buy it off of Ebay.
My area of expertise is jewelry making, so unfortunately, I'm not sure how you would approach a project like that. I would suggest doing an internet search to see if anyone else has information on that.
The very last step, you could use a saudering iron to melt the final two pieces together so you don't burn the others. You can get them for like $8 brand new. Super cheap. Just an idea for those that don't want to burn the others.
Paracord pro-tip. Instead of using the side of your plastic lighter to flatten out the melted paracord at the ends, use the metal portion. It won't stick to the metal. Or, use a jet lighter (more precise control) and a flattening tool (flathead screwdriver will do in a pinch, but amazon has the tools). Again, it won't stick to the metal.
I'm sure you know what you're doing but please keep in mind your audience's skill level may not be so high. Using several other videos I've learned their patterns without too much problem but your hands are hiding your cords too much with the video angle you're using and you are not stopping at strategic points for us to keep up. Thank you for trying to share this pattern with us.
I was just thinking if you wanted to make a double shark tooth witch is almost the same knot but you need 2 inner strands so you would need a 2 inch buckle and that would be one wide bracelet
I have to agree with the consensus here..I am really trying to understand this process but somehow I am getting mixed up. Maybe I will try it with the sound off...just watching
ok I got it. She knows exactly what to do so she is unaware that she is not conveying that. I believe once you cycle through the left set and then mirror the right set, you go back to the left set and do the opposite. So try to substitute her saying left and right for the cords themselves by thinking 1, 2 and 3 for the left cords and 3, 2, and 1 for the right cords. I think that is what she means by mirroring. So when you go back to the left side now go the opposite direction, 3,2 and 1 and right side 1,2 and 3. Also if the snake goes in the hole one time it has to come out the hole next time on that side. I know it sounds crazy but it worked for me. Thanks Captain Quint!
Not sure if this has been done, but could you see about trying to make these, to make a Forearm Cuff? Would like to make one of those. Know it will take a lot of 550 Cord
If you're just looking to make a longer one that would fit on the forearm, you would follow the same instructions, including those for determining the length of your cord.
Chris Flowers This type of bracelet, done as demonstrated, fits well on the 1 inch buckle, so that's the size I would recommend. I don't think it would fit in the smaller buckle. The knotting begins at 5:56. You just repeat the square knots and cross overs until you've got the desired length.
Alonso Franco You'll need about a foot of each color of cord for each inch of knotting. I hope this basic guide helps you determine how much you will need. Macrame 101: How to Create Macrame Jewelry www.beadaholique.com/s-2029-macrame-101-how-to-create-macrame-jewelry.aspx?RUclips&
Nice instructional video, great voice no distracting music and I can't wait to watch more! Yesterday I kept saying to myself...explain like I am 5.
The general rule of thumb for cobra knotting is for each strand, about one foot of cord for each inch of finished knotting. So you'd need about 30 feet per strand.
I made this bracelet once. I had struggled to follow this routine because it is way too quick with visual. Seems like the person knows what they are doing and only one cycle is visually explanatory. Would have been really nice if this instruction was done in a slower pace and more step by step at least for few passes and then the instructor could have whipped through the rest. Just my thoughts as i am just learning to braid and this could have been a great video with the exception of that part.
@angel cocio - We sell the supplies to make this bracelet. The links for the supplies in this video are located in the video description underneath this video.
Muy elaborado tejido, bello
You can cross either one on top, and yes, it will reverse what that looks like when you change it. You can choose whichever one to go on top, but it does look neater when you keep it consistent.
I was looking for a video on how to make a wide one for a dog collar, this video was perfect, thank-you
Our videos are made to teach you techniques and inspire you to create :) All of the supplies for you to make your own Wide (Double) Cobra Paracord Bracelet can be found in the video description.
I enjoyed this video very much. This being my first time watching any BEADAHOLIQUE video, I admit, having seen other tutorials covering the simpler fundamentals did make following your hand-work (& spoken directions) easier to absorb the work as it unfolds. If I didn't completely grasp it the first time, a second run through it cleared me up on the points that may have felt a bit rushed through. Hey! Keep it up. you have a true natural ability to Show, Share & Teach with your hands as well as your vocal persona. You have a gift, develop your gift. ... Thank You for Sharing : )
Simple, helpful rule: Black working strand always goes over the base strand, and the gray working strand always goes under the base working strand.
It took me a while to understand what you were doing, until I figured out this simple rule. I didn't have to strain my brain to see how you were "mirroring" the cobra knots.
Thank you so much, this was very helpful, I made a collar for my friends dog using this technique and it holds, sits and fits so much better the a single cobra.
You can get Paracord on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Parachute cord (paracord) is a durable, multi-purpose nylon rope with practical and artistic applications. You can get the supplies featured in our videos on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
You can get the supplies featured in our videos on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
The video was helpful for those who already know the basic Cobra weave. I did find that the constant movement of the bracelet to be some what distracting (a jig would have helped), thus making it hard to see what you were doing, especially for beginners! Although I get that maybe beginners should start with something simpler! Also at the end, I think you would have much better results with burning the ends with a torch style lighter, rather than the Bic. Or maybe tucking them for a more finished look. All in all a great video! Thank you so much!
when you melt the ends, use a metal something like pliers or scissors to press cos its cold & won't stick like plastic. TY for sharing your work! Neat idea!
They are called Xuron Sharp Flush Cutter Pliers. You can get them on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Looks like a nice project to work on when you want to stay indoors because of the weather
thank you for posting this i have been trying to figure out how to make this and your video was most helpful and i will be sure to pass your name around. thanks again!
thank you for the instruction. However, as you knot...I found that the instruction stopped and it was hard to see what cord went over or under what. Fingers in the way. But I slept on it and found this morning by replaying the first few minutes and repeating I am now knotting the cord correctly and it is beautiful!!! I am making an extra wide dog Martingale collar and it looks fabulous! Thank you again for your time but other viewers if you are a beginner like me just keep replaying the first 4 knots and you will be on your way! Some go over then under then after the cross over cords that pattern switches--pay attention!
I like this...my other phiton twister necklaces were tricky too...The cobra stitch is easy
I apologize...with some work I figured out the weaving, however at 16 minutes it gets completely confusing. I think people here agree that it is an awesome bracelet. But your hands are in the way and your explanation glances on just talking to yourself rather than teaching. You are watching your hands go through the motions that you already know, but not telling the audience what you are doing exactly. The bracelet looks great but I am going to have to experiment to finish it. Thanks for sharing
these could be great dog/cat collars, depending on size of course :) lovely!!
a jig may not be necessary, however a jig and a pair of "fids" or lacing needles help the process immeasurably, and you can make both for well under $10. With these tools it is possible to make projects without burning the ends and make a much cleaner peice
all id suggest is to use the metal part of your lighter to flatten the fuses, the plastic wont stick to metal, it shicks it, iv gotten great clear smooth fuses doing this. great vid
@tuan dan Nguyen - We used paracord to make this bracelet. You can find it here: www.beadaholique.com/t-ba-project-B1068.aspx?RUclips&
You can get the supplies featured in our videos on Beadaholique.com's website. The links for the supplies in this video are located in the video description underneath this video.
It can be pretty stiff, yes, but that will vary based on how tight you pull your knots. I would suggest experimenting a little bit with a smaller piece first to see if it will work for your project.
love your videos thank you i could listen to you all day
After hours of trying to get this right I finally worked out that the black (or the single colour) cord NEVER passes over the top of the second string. it always goes behind it. That will make it easier to keep track of your sequences.
Yes, these buckles are generally listed by the size of the opening. The product description should give you complete measurements for the opening and the entire buckle.
Thank you for this very helpful video. I made a 16 inch dog collar and it turned out great due to your very detailed instructions.
I have a jig for smaller, regular bracelets but it wouldn't work for this larger project. So, after I had about three inches done, I used a c-clamp to clamped the collar to the work bench. The work went a lot faster after that.
You could use a jig, if you find that it makes the process easier, but it's not necessary.
No, you don't need that much. Each cord comes in a 4.8 meter length when you buy it. You will need three 8 foot lengths for this bracelet.
Nice work! I ended up using this video to make my first gun sling. Thank you. I think you are the easiest to follow out of all the vids I watched on this subject! If I could offer you some friendly advise after watching others and that is to get one of those torch lighters, they work a lot better by throwing out a straight flame. FYI
I liked the colors you used in this example
If you wanted the X on the top, you could just attach the cords like I show here and then flip it over to do the knotting. Then flip it back over to finish the other buckle.
I experienced the same difficulty fusing lengths of the paracord together so I took a needle and thread and stitched them instead. End product is fine.
Unfortunately, we do not carry a tool like that, and I have never used one, so I cannot say whether or not it would work.
Hey Beadaholique, try using a butane lighter to burn the ends, when your finished with your projects. The butane lighters work so much better than the Bic lighters, (at least that's what I've noticed & seen), & will give direct melting to the ends of the paracord, unlike the Bic lighters, which seem to burn everything else around the ends too. Plus, the butane lighter's side, will give it a nice smooth finish, when burning the ends off. Since I've started using a flip-open top butane lighter, my projects have seem to go a lot smoother, & I'm not turning the ends and everything else around them black & ugly. Never again will I use a Bic lighter on Paracord lol. TRY IT & GOOD LUCK!!! ;)
Sincerely,
HeatherMarie
Heather Gozdziak Bic lighters ARE butane...I think you mean “jet” lighters.
Superglue works a lot better than melting it... I fined gutting the end that you fuss help as well... Just a few tips ...
Good tips thanks Chuck!
it can also be used as a survival rope while camping its good stuff.
You can definitely experiment with other types of cords to see how it works. I haven't tried adding beads to this technique, but again, feel free to experiment and see what you get.
Hi cool video and good bracelet job too. Have tryied using a small heated rod to get the paracord end finished in place o the BIC lighter? I believe it can help you get a nice finish without flame heating the sorroundings of the bracelet. Keep up sharing your works please. Bye.
Yes, the actual buckle is a little larger than an inch. The opening for the cords is 1", which is how we have them listed for sale.
Nice video, thanks. One thing that struck me was that the second buckle attachment having only two strands looks odd. I wonder if it would look better if each attachment strand was wrapped around the buckle bar a couple of times before feeding it back to be braided over. That way it would look more like the other end. Guess I'll try it and see :^)
Sorry I should have said, "Super video". Many thanks for the inspiration.
this is perfect! I'll be making a 13 inch one for my dog :)
Miss a clamping jig will make it better for viewing and learning how to do this
you can use a drop of supper glue to weld the ends to the cord also.
Love this one, have to try it! Thank you! 😀👍
You have good taste in wedding rings.
"Paracord" is short for "Parachute Cord." It can be found in military stores, hiking stores, survival stores, etc. "Paracord" is a cord that is very very strong and is made up of multiple strands. It is also called "550 Cord," because it holds a minimum of 550 pounds per length. You can also buy it off of Ebay.
My area of expertise is jewelry making, so unfortunately, I'm not sure how you would approach a project like that. I would suggest doing an internet search to see if anyone else has information on that.
Thanks much from me and my wife your stuff if very helpful. =)
she did mention that there was an entire other video on how to do the square knot. Perhaps you could try that.
This was amazing
Nice touch with the subtitles!
Done :) My Girlfriend just finished my Tacticool-AR15 Hunting Sling! :D
Excellent video and instruction. I am ready to make my first wide (double) cobra paracord bracelet. Peace
Thanks so much, I like a lot the bracelet
I love the way she said buckle:)
thanks! I found it easy to follow!
The very last step, you could use a saudering iron to melt the final two pieces together so you don't burn the others. You can get them for like $8 brand new. Super cheap. Just an idea for those that don't want to burn the others.
I've learned if you use a wind resistant lighter is is easier to burn the middle pieces.
use the blue part of the flame it hot and it dosent blackend the ends
Paracord pro-tip. Instead of using the side of your plastic lighter to flatten out the melted paracord at the ends, use the metal portion. It won't stick to the metal. Or, use a jet lighter (more precise control) and a flattening tool (flathead screwdriver will do in a pinch, but amazon has the tools). Again, it won't stick to the metal.
Also keeping the paracord in the blue flame help keeps the color of the paracord instead of getting the nasty black soot look.
that would make a great belt thanks for the idea :)
Rather than using a lighter could you use a 40-Watt Pencil Iron so not to melt too much cord or melt the buckle??
Thank you.
butane torch......hotter and directional
for burning the ends
great work, just out of curiosity why dont you use a jig? I am a new new sub also, keep up the good work!
i just made a long ass belt using this thanks to you
I'm sure you know what you're doing but please keep in mind your audience's skill level may not be so high.
Using several other videos I've learned their patterns without too much problem but your hands are hiding your cords too much with the video angle you're using and you are not stopping at strategic points for us to keep up.
Thank you for trying to share this pattern with us.
It's hard to see all the detail because the camera is in an angle
that was nice
I was just thinking if you wanted to make a double shark tooth witch is almost the same knot but you need 2 inner strands so you would need a 2 inch buckle and that would be one wide bracelet
Super design. I like . Women's hands designed for precision. How much in black and army green. I want to buy
I thought your profile picture was the "Chocolate Rain" for a second xD
I have to agree with the consensus here..I am really trying to understand this process but somehow I am getting mixed up. Maybe I will try it with the sound off...just watching
ok I got it. She knows exactly what to do so she is unaware that she is not conveying that. I believe once you cycle through the left set and then mirror the right set, you go back to the left set and do the opposite. So try to substitute her saying left and right for the cords themselves by thinking 1, 2 and 3 for the left cords and 3, 2, and 1 for the right cords. I think that is what she means by mirroring. So when you go back to the left side now go the opposite direction, 3,2 and 1 and right side 1,2 and 3. Also if the snake goes in the hole one time it has to come out the hole next time on that side. I know it sounds crazy but it worked for me. Thanks Captain Quint!
Thank you for the vid, very informative. :^)
If you cross the gray on top will it look the same as the black on the bottom
Not sure if this has been done, but could you see about trying to make these, to make a Forearm Cuff? Would like to make one of those. Know it will take a lot of 550 Cord
If you're just looking to make a longer one that would fit on the forearm, you would follow the same instructions, including those for determining the length of your cord.
Chris Flowers This type of bracelet, done as demonstrated, fits well on the 1 inch buckle, so that's the size I would recommend. I don't think it would fit in the smaller buckle. The knotting begins at 5:56. You just repeat the square knots and cross overs until you've got the desired length.
Note: weave starts at 5:30 for skipping intro
Is the 30 feet per strand before or after its folded in half around the buckle?
Where do you buy "Paracord" ? What is "Paracord"? Is it a special kind of cord? A brand? I'm trying to find some but its tough!
awesome
You know the hottest part of the light is the tip right? It will melt much faster that way.
hi,
why don't you just sow the ends to themselves instead of melting? it would require just a few loop and probably would hold even stronger.
Very Kool
is it your idea.
good!
agghhh mahh gawd i got it you tought me i love you
can i have this off of a smaller buckle , also how would i incorporate a watch and compas?
that buckle looks bigger than 1", is that the correct size?
good video, nice bracelet. How about using a soldering iron to fuse?
I haven't ever worked with a soldering iron, so I can't say whether or not that would work.
I will try it tomorrow, and let you know.
so you measure the buckles by the opening for the cord?
a single core cobra is Know as a "Solomon Bar" which looks the same as a Cobra
What kind of orange handle clippers are those at 3:46? Do you remember where you got them?
Can you do a tutorial for this without buckle?
I congratulate you for your work
For every 10 inches pulcera few inches of paracor used?
Alonso Franco You'll need about a foot of each color of cord for each inch of knotting. I hope this basic guide helps you determine how much you will need.
Macrame 101: How to Create Macrame Jewelry
www.beadaholique.com/s-2029-macrame-101-how-to-create-macrame-jewelry.aspx?RUclips&
Beadaholique Thanks for taking the time to reply
I am very grateful
Have not tried this one yet, it is a bit harder to do :)