I have a 2011 f150 ecoboost I want to put rims and tires on it but I dont want to lift it and I want good size tires and I want them to stick out like 1 1/2 inches to 2 inches what should I do and I don’t have much money to do it being younger and owning a truck
A 2" leveling kit will be very inexpensive and will allow for a more aggressive wheel and tire combo. I have a 2013 F150 with a 2 inch level, 20x9 wheels with a +10 offset, and 33x12.5 inch tires. I did no trimming and nothing rubs. They also stick out about 2 inches
I'm really debating on either a new f150 EcoBoost or 5.0 what are some of your opinions?? Not much towing but lots of city with bed full of stuff for work.
@@CustomOffsetsTV I am also planning on putting a level and adding larger tires. From your experience or from what people say what is the better engine after the lift?
Hey custom off sets! i hope you read this! for these newer gen ford powerstrokes have you seen or heard any common problems with transmission wear due to the large heavy tires and gear ratios? like the ram 2500s 68rfe transmissions.... im currently in iraq but when i come back to the US I wanted to start a diesel build but cant choose between Ram or Ford...pretty sure ill have to do a gear swap either way (dont wanna blow a trans) but maybe with these new HD redesigns maybe i wont have to!
Im looking for a leveling kit for my 2016 F250. I was thinking of keeping the platinum rims on it, but not sure if i can fit some 35's under there. Any input? Looking for a 2-2.5 inch level.
@@ChefBoyRLe_ 20x9 fuel wheels. Barely rubs at full turn or on an incline. Didn't bother me. But I put wheel spacers to help a little it didn't do much at all. Look at the Custom Offsets gallery they have plenty of trucks on there with wheel tire combos and what rubs and what doesn't.
Why would you not show the truck finished like in the thumbnail? You guys do that all the time. I want to see finished product with the wheels and tires on, that’s kinda your brand. Thanks.
Regis Riley I drive mine daily and pull more stuff than you do ... I Guarantee it stop Hating cause you can’t afford it..and my truck is lifted 11 inches
What does custom offsets put their caster at for the superduty??? Im reading they want 3+ to help with death wobble down the line? Any input
So we don't get to see the final result? What tires and wheels????
What’s the height of the truck to top of roof?
I have a 2011 f150 ecoboost I want to put rims and tires on it but I dont want to lift it and I want good size tires and I want them to stick out like 1 1/2 inches to 2 inches what should I do and I don’t have much money to do it being younger and owning a truck
33s with 10 wides
A 2" leveling kit will be very inexpensive and will allow for a more aggressive wheel and tire combo. I have a 2013 F150 with a 2 inch level, 20x9 wheels with a +10 offset, and 33x12.5 inch tires. I did no trimming and nothing rubs. They also stick out about 2 inches
Check our gallery out for fitment help Levi! TONS of setups for that year of truck! bit.ly/2DgLW0N
Wesley Viola ok thank you I’ve been looking for a long time now I need advice
@@wesleyviola2823 you have any way of showing me a picture of your truck like Instagram
Wow ....why not even show the final lift??
Any mods to the front shaft lengthened or spacer
Kit comes with anything and everything you'd need to achieve this height James!
Part 2 and finished product. Please and thank you.
Casey Todd I know right!!! 🤷🏻♀️
I'm really debating on either a new f150 EcoBoost or 5.0 what are some of your opinions?? Not much towing but lots of city with bed full of stuff for work.
personal preference GSR, drive both, see what you like!
@@CustomOffsetsTV I am also planning on putting a level and adding larger tires. From your experience or from what people say what is the better engine after the lift?
Coyote with 120, drives like new. Simpler.
@@derekortiz3663 What do you mean by 120 a forced induction unit? Sorry passed right over my head. Lol
I wanna see details on that rear air suspension!!
Justin Redenius chevk out dmaxrhyno
Wanna see part 2 finished!
I would like to see a shit I need knew video on aftermarket wheel lockout hub caps and covers ect
Manual hubs you don't run center caps or you cut them to go over the hubs.
A massive pitman arm......same size as and 80s truck
Hey custom off sets! i hope you read this! for these newer gen ford powerstrokes have you seen or heard any common problems with transmission wear due to the large heavy tires and gear ratios? like the ram 2500s 68rfe transmissions.... im currently in iraq but when i come back to the US I wanted to start a diesel build but cant choose between Ram or Ford...pretty sure ill have to do a gear swap either way (dont wanna blow a trans) but maybe with these new HD redesigns maybe i wont have to!
We have not, best thing is get a tuner on them asap, with some good tunes it all around saves the truck DJ!
thanks so much man!
Hey guys of custom offsets I need hel to lift my 1986 Dodge 250 5.9L is a RWD and I haven find parts to lift it not that crazy lift only like 4 in max
Shoot us an email to info@customoffsets.com !
Im looking for a leveling kit for my 2016 F250. I was thinking of keeping the platinum rims on it, but not sure if i can fit some 35's under there. Any input? Looking for a 2-2.5 inch level.
I got a 3 inch supreme suspension level kit on my 2015 f250. Fit 35s good
Wyatt Boren stock rims? The truck i just signed for has 20x8, the OEM platinum rims. Not sure offset. Any rub?
@@ChefBoyRLe_ 20x9 fuel wheels. Barely rubs at full turn or on an incline. Didn't bother me. But I put wheel spacers to help a little it didn't do much at all. Look at the Custom Offsets gallery they have plenty of trucks on there with wheel tire combos and what rubs and what doesn't.
@@DjLitInTheHouse did you lift the back or does it sit level with the 3 inch supreme kit?
It's level
Make a video on the air 4-link on the back
Dmaxrhyno has that set up and he did a video on it
Austin Fouts ohh ok didnt know it was going to be the same one. Thanks
Maybe a camera on the ceiling looking towards the ground would have been better
Is fabtech a good brand? I’m buying the basic system 8 inch lift with upgraded dirt logic shocks for my 08 f350 king ramch
Yes they definitely dont seem to be short of quality especially at their price point.
Custom Offsets thanks so much. I would’ve went with zone or BDS but they didn’t have a 8” lift for my f350
4 inch piston “ diameter “ ummmm
Why would you not show the truck finished like in the thumbnail? You guys do that all the time. I want to see finished product with the wheels and tires on, that’s kinda your brand. Thanks.
We can take this into consideration!
Sure pugsly
Hey man, talk into the camera.
We wear wireless Mic's Derek!
If someone drives a truck this high normally lol..... I would see this great for shows but normal use almost cripples the use of the truck itself.
Plenty capable of still towing Regis, drop hitch helps alot
Regis Riley I drive mine daily and pull more stuff than you do ... I Guarantee it stop Hating cause you can’t afford it..and my truck is lifted 11 inches
More superduties!
Finally
Not brad ugh
Fourth
First